• 대한안전경영과학회지
• /
• 제18권1호
• /
• pp.1-8
• /
• 2016

This study was conducted by survey and inspection of stair passage leading lights in shopping buildings which are more than 5 stories and have an underground parking lot located at Pyeongtaek-si and Seongnam-si. Number of shopping building for this study is 30 and of stair passage leading light inspected by two lights in each shopping building is 60. The result of this study is that the type of installed leading lights is LED(77%), and 60% of leading lights has problem such as no cleaning, scratch and discoloration, etc. The height of installed leading lights meets the fire law which is less than 1m from the floor. Visible condition of leading lights is good except some leading lights which have a little visible problem due to banner advertisement. 37% of standby power has flickered and went out. 93% of total leading lights meets the fire law which is more than 1lux from 0.5m distance, but cold cathode fluorescent lamps(CCFLs) have the problem which not meets proper brightness level based on fire law. In additional measurement result, zero lux of leading lights is 32%(from 1m distance), 68%(from 1.5m distance) and 98%(from 2m distance). Leading light is very important facility because it is eyes and guide when emergency. Therefore, proper fire facility operating function inspection and total detailed inspection are important to keep the good condition of leading light except simple visual check, and also improvement in law system of type approval, fire construction inspection and illumination level will be needed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.353-353
• /
• 2008

Carbon nanotubes (CNTs) are attractive for field emitter because of their outstanding electrical, mechanical, and chemical properties. Several applications using CNTs as field emitters have been demonstrated such as field emission display (FED), backlight unit (BLU), and X-ray source. In this study, we fabricated a CNT cathode using transparent ultra-thin CNT film. First, CNT aqueous solution was prepared by ultrasonically dispersing purified single-walled carbon nanotubes (SWCNTs) in deionized water with sodium dodecyl sulfate (SDS). To obtain the CNT film, the CNT solution in a milliliter or even several tens of micro-litters was deposited onto a porous alumina membrane through vacuum filtration process. Thereafter, the alumina membrane was solvated by the 3 M NaOH solution and the floating CNT film was easily transferred to an indium-tin-oxide (ITO) glass substrate of $0.5\times0.5cm^2$ with a film mask. The transmittance of as-prepared ultra-thin CNT films measured by UV-Vis spectrophotometer was 68~97%, depending on the amount of CNTs dispersed in an aqueous solution. Roller activation, which is a essential process to improve the field emission characteristics of CNT films, increased the UV-Vis transmittance up to 93~98%. This study presents SEM morphology of CNT emitters and their field emission properties according to the concentration of CNTs in an aqueous solutions. Since the ultra-thin CNT emitters prepared from the solutions show a high peak current density of field emission comparable to that of the paste-base CNT emitters and do not contain outgassing sources such as organic binders, they are considered to be very promising for small-size-but-high-end applications including X-ray sources and microwave power amplifiers.

• 한국식품과학회지
• /
• 제34권1호
• /
• pp.65-72
• /
• 2002

식혜 제조시 당화에 영향을 미치는 인자인 엿기름 추출온도와 시간, 엿기름과 물의 비율, 밥의 양을 반응표면분석법의 중심합성계획에 따라 설계하여 각각 조건들의 영향을 dual cathod system으로 구성된 바이오센서로 행하였을 때 포도당과 맥아당의 측정은 엿기름 추출온도 및 각각의 조건들은 포도당과 맥아당의 최적조건이 약간은 다른 결과를 보였는데 포도당에서는 $60^{\circ}C$, 맥아당은 $55^{\circ}C$에서 최적의 온도를 나타내었고 엿기름 추출시간은 포도당이 6시간 30분, 맥아당은 5시간 45분이었으며 물과 엿기름의 비율은 포도당과 맥아당 각각 1:6.3, 1:8.8이었고 엿기름 추출액과 고두밥의 양에서는 0.48%는 포도당, 0.6%는 맥아당이 최적조건이었다. 반응표면분석법에 의하여 유의차를 검증한 결과 그 상관관계를 비교했을 때 유의성이 높게 나타났다.

• 한국세라믹학회지
• /
• 제42권2호
• /
• pp.117-122
• /
• 2005

나노 코팅 기술로써 빠른 증착 속도와 미세구조 제어가 용이하여 항공기 엔진 부품 열차폐 코팅으로 널리 이용되는 Electron Beam Physical Vapor Deposition (EB-PVD)세라믹 코팅 기술을 연료전지 전해질 제조에 적용하였다. EB-PVD 법을 이용하여 NiO-YSZ 기판에 YSZ 전해질을 약 10$\mu$m의 두께로 짧은 시간에 코팅하였으며 증착온도에 따라 나노 구조의 표면을 가진 YSZ 막을 얻을 수 있었다. 연료전지 전해질로서의 특성을 평가하기 위하여, 같은 조건의 코팅으로 $Al_{2}O_3$기판에 전해질을 동일한 조건으로 코팅하여 전해질의 전기적 특성을 평가하였다. 또한 양극물질로서 $LaSrCoO_3$ 분말을 일반적인 스크린 프린팅 기법으로 코팅하여 EB-PVD의 코팅을 이용한 고체산화물 연료전지 제조 가능성에 대하여 논의하였다

• 한국진공학회지
• /
• 제6권1호
• /
• pp.85-90
• /
• 1997

32cm직경의 $AlCu_x$(x=0.5%)음극 타겟과 회전 자석을 이용한 상용 마그네트론 스퍼 터링 장치에서 부가적인 플라즈마 여기 방법으로 스퍼터링된 입자들을 이온화시킨후, 수십 볼트의 직류 기판 바이어스로 이온의 방향성과 에너지를 조절하여 작은 트렌치나 via를 채 울 수 있는 공정을 개발하였다. 여기에서, 반경방향의 이온 플럭스비의 균일도 문제를 개선 하기 위하여, 입자들의 가시광선 영역의 방출선을 이용한 플라즈마 진단과, 패터닝된 웨이 퍼에 대한 직접 채우기로 플라즈마 내의 입자 분포와의 상관 관계를 찾고, RF 코일 설계의 개선을 도모하였다. 가시광 방출 분광에서 $Ar^{\circ},\;Ar^+;Al^+,\;Al^{\circ}$ 입자들의 방출선 세기는 1$\mu\textrm{m}$이 하의 크기를 갖는 트렌치와 via의 바닥과 top 두께비와 밀접한 관련이 있었다. RF코일의 직 경을 29cm에서 32cm로 증가 시키고, RF 입력부에 의한 비대칭을 개선하여 이온 플럭스비 의 척도가 되는 via 채우기의 바닥과 top의 두께비에서 7.5%에서 1.5%로의 균일도 향상을 얻었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.255-255
• /
• 2011

Zinc oxide based thin films have been extensively studied in recent several years because they have very interesting properties and zinc oxide is non-poisonous, abundant and cheap material. ZnO films are employed in different applications like transparent conductive layers in solar cells, protective coatings and so on. Wide industrial application of the ZnO films requires of development of cheap, effective and scalable technology. Typically used technologies don't completely satisfy the industrial requirements. In the present work, we studied effect of the deposition parameters on the structure and properties of ZnO films deposited by DC arc plasmatron. The varied parameters were gas flow rates, precursor composition, substrate temperature and post-deposition annealing temperature. Vapor of Zinc acetylacetone was used as source materials, oxygen was used as working gas and argon was used as the cathode protective gas and a transport gas for the vapor. The plasmatron power was varied in the range of 700-1500 watts. Flow rate of the gases and substrate temperature rate were varied in the wide range to optimize the properties of the deposited coatings. After deposition films were annealed in the hydrogen atmosphere in the wide range of temperatures. Structure of coatings was investigated using XRD and SEM. Chemical composition was analyzed using x-ray photoelectron spectroscopy. Sheet conductivity was measured by 4-point probe method. Optical properties of the transparent ZnO-based coatings were studied by the spectroscopy. It was shown that deposition by a DC Arc plasmatron can be used for low-cost production of zinc oxide films with good optical and electrical properties. Increasing of the oxygen content in the gas mixture during deposition allow to obtain high-resistive protective and insulation coatings with high adhesion to the metallic surface.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.283-283
• /
• 2011

The n-doping effect by doping metal carbonate into an electron-injecting organic layer can improve the device performance by the balanced carrier injection because an electron ohmic contact between cathode and an electron-transporting layer, for example, a high current density, a high efficiency, a high luminance, and a low power consumption. In the study, first, we investigated an electron-ohmic property of electron-only device, which has a ITO/$Rb_2CO_3$-doped $C_{60}$/Al structure. Second, we examined the I-V-L characteristics of all-ohmic OLEDs, which are glass/ITO/$MoO_x$-doped NPB (25%, 5 nm)/NPB (63 nm)/$Alq_3$ (32 nm)/$Rb_2CO_3$-doped $C_{60}$(y%, 10 nm)/Al. The $MoO_x$doped NPB and $Rb_2CO_3$-doped fullerene layer were used as the hole-ohmic contact and electron-ohmic contact layer in all-ohmic OLEDs, respectively, Third, the electronic structure of the $Rb_2CO_3$-doped $C_{60}$-doped interfaces were investigated by analyzing photoemission properties, such as x-ray photoemission spectroscopy (XPS), Ultraviolet Photoemission spectroscopy (UPS), and Near-edge x-ray absorption fine structure (NEXAFS) spectroscopy, as a doping concentration at the interfaces of $Rb_2CO_3$-doped fullerene are changed. Finally, the correlation between the device performance in all ohmic devices and the interfacial property of the $Rb_2CO_3$-doped $C_{60}$ thin film was discussed with an energy band diagram.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.333-333
• /
• 2011

We have investigated the breakdown properties in liquids by high voltage pulse system. High voltage pulse power system is consisted of the Marx-generator with two capacitors (0.5 ${\mu}F$, withstanding voltage is 40 kV), to which the charging voltage can be applied to maximum 30 kV DC, spark gap switch and charging resistor of 20 $M{\Omega}$. We have made use of tungsten pin electrodes of anode-cathode (A-K), which are immersed into the liquids. The breakdown voltage and current signals are measured by high voltage probe (Tektronix P6015A) and current monitor (IPC CM-1.S). Especially the high speed breakdown or plasma propagation characteristics in the pulsed A-K gap have been investigated by using the high speed ICCD camera. We have measured the electron temperature through the Boltzmann plot method from the breakdown spectrums. Here the A-K gap has been changed by 1 mm, 2 mm, and 3 mm. The used liquids are distilled water and solution of salt (0.9 %). The output voltage and current signals at breakdown in distilled water are shown to be bigger than those in saline solution. The breakdown voltage and current characteristics in liquids will be discussed in accordance with A-K gap distances. It is also found that the electron temperatures and plasma densities in liquids are decreased in conformity with A-K gap.

• Nuclear Engineering and Technology
• /
• 제23권4호
• /
• pp.438-443
• /
• 1991

각확산도가 작은 $He^+$ 이온빔 인출전류를 최대로 얻기 위하여 Duoplasmatron 이온원의 동작특성을 조사하였다. 이온원의 기체압력, 아크전류. 전자석 전류, 인출전압등을 변화시키면서 인출되는 $He^+$ 이온빔 전류의 변화를 관찰하였다. 열음극으로는 Ni망위에 BaO와 SrO의 혼합물을 코팅한 산화물 필라멘트를 사용하였으며, 그것의 평균수명은 약 100시간이었다. 인출전류는 아크전류에 선형적으로 비례했다 이온원 전자석전류를 증가시킴에 따라 인출전류는 증가하였지만 빔의 각확산도가 커졌다. 최대의 인출전류는 0.084 Torr의 이온원 압력에서 얻어졌다. 인출전류는 이론에서와 마찬가지로 인출전압의 3/2승에 비례하였다. 5.72 kV의 인출전압에서는 최적인출조건하에서 50 $\mu$A의 인출전류가 얻어졌다.

• 한국자기학회지
• /
• 제13권6호
• /
• pp.251-256
• /
• 2003

컴퓨터, TV, 의료용기기 등의 모니터로 사용되는 브라운관의 자기장 영향에 따른 특성을 분석하기 위한 자기장 발생 및 측정장치를 개발하였다. 한 변의 길이가 2 m인 정육각형 형태의 3-축 자기장 발생장치, 컴퓨터, 전원공급기 및 자기장 측정기 등을 이용하여 전세계 각 나라별 지구자기장(Earth Magnetic Field, EMF)을 발생시킬 수 있는 대형 3-축 코일 시스템을 설계하고 제작하였다. 각 코일의 코일상수는 X축(E-W)는 30.31 $\mu$T/A, Y축(Ver)는 29.73 $\mu$T/A 및 Z축(N-S)는 30.51 $\mu$T/A이고, 자기장 분해능은 0.01 $\mu$T이었다. 자기장 균일도는 사용되는 편향요크(Deflection York, DY)의 크기를 고려하여 중심에서 12 cm 이내의 공간에서 측정하였고, 균일도는 1 % 내외 이었다.