• Journal of Technologic Dentistry
• /
• v.38 no.3
• /
• pp.185-191
• /
• 2016

Purpose: The purpose of this study were to evaluate the quality of dental prostheses printed by 3-dimensional printing system. Methods: Mater model was prepared and ten study models were fabricated. Ten single crowns were printed by 3D-printing system(Resin group) and another ten single crowns using casting method were manufactured(Metal group). The marginal adaptation of single crowns were measured using by silicone replica technique. Silicone replicas were sectioned four times. The marginal adaptations were evaluated using by digital microscope. Statistical analyses were performed with Mann-Whitney test(${\alpha}=0.05$). Results: $Mean{\pm}standard$ deviations of all marginal adaptations were $92.1(20.0){\mu}m$ for Metal group and $69.7(12.3){\mu}m$ for Resin group. Two groups were no statistically significant differences(p>0.05). Conclusion: Marginal adaptation of single crowns printed by 3D-printing system were ranged within the clinical recommendation.

• Journal of the Korean Ceramic Society
• /
• v.31 no.9
• /
• pp.1044-1052
• /
• 1994

Tape casting technique was successfully applied to produce porous ceramics and multi-layered ceramics containing porous layers, where spherical hollow polymer particles were introduced as pore precursors. In the presence of extreme differences in density and size between Al2O3 and pore precursor particles, hindered settling was effective in preventing segregation of component particles and packing behavior of mixed powders was improved through bimodal packing. There were two transitions in packing behavior of mixed powders. The first transition took place at 40~50 vol% pore precursor addition, where majority of pores changed from close to open pore state. The other transition occured at 60~70 vol% pore precursor addition, where pore precursor particles formed a continuous network structure.

• Journal of the Korean Ceramic Society
• /
• v.36 no.7
• /
• pp.773-781
• /
• 1999

A new technique to fabricate complex-shaped mullite has been developed through gelcasting without organic binder. The suspension of a commercial mullite powder and boehmite-SiO2 sol as binder was elecrtrosterically stabilized. Ammonium polymetharylyate was employed as a dispersant for the electrosteric stabilization. Complex-shaped bodies were made through casting and gelation at room temperature. The green bodies were dried at a temperature of 30$^{\circ}C$ and relative humidity of 98% without crack development. The dried bodies were then pressureless-sintered at 1650$^{\circ}C$ for 2 h to get a relative density of 98% The Vickers hardness and 4-point flexural strength of sintered parts were 11.0 GPa and 150MPa respectively which are similar to those of commercially available sintered mullite.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.765-766
• /
• 2006

[ $Mo_2FeB_2$ ] boride base cermets produced by a novel sintering technique, called reaction boronizing sintering through a liquid phase, have excellent mechanical properties and wear and corrosion-resistances. Hence, the cermets are applied to the injection molding die-casting machine parts and so on. We investigated that the effect of deoxidization and sintering temperature on mechanical properties and deformation of the MIM processed cermets. As a result, deoxidization temperature of 1323K and sintering temperature of 1518K were suitable. The MIM products of the cermets showed allowable dimensional accuracy and the same mechanical properties as the press-sintered ones.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.159-162
• /
• 1998

The new type polymer electrolyte composed of polyacrylonitrile(PAN) baed polymer electrolyte contain LiClO$_4$-EC/PC and LiPF$\sub$6/-EC/PC were developed for the weightless and long or life time of lithium polymer battery system with using polyaniline electrode. The gel type electrolytes were prepared by PAN at different lithium salts in the glove box. We prepared for polymer electrolyte with knife casting method. The minimum thickness of PAN gel electrolyte for the slim type is about <400∼500$\mu\textrm{m}$. These gel electrolytes showed good compatibility with lithium electrode. The test cell of Li/polymer electrolyte/Lithium cobalt oxide solid state cell which was prepared by different lithium salt was researched by electrochemical technique. Resistance of polymer electrolyte which consist of LiClO$_4$ is more less than that of LiPF$\sub$6/ and cycle life is more longer than that of LiPF$\sub$6/.

• Proceedings of the Korea Database Society Conference
• /
• 2000.11a
• /
• pp.63-66
• /
• 2000

컴퓨터를 이용한 인터넷의 발전으로 웹 코스웨어의 교육에 응용하려는 많은 사람들이 지속적으로 증가되어가고 있다. 이는 인터넷 이용자들이 쉰 상에서의 원격교육에 관한 필요성이 커지고 있으며, 이를 실세계에 다양한 방법 이용하여 보다 효율적인 교육을 위해 다양한 교육 툴들이 연구되어지고 있다 인터넷을 이용한 웹 코스웨어의 교육은 시공간을 초월하여 여러 곳에 떨어져 있는 학습자들의 자기 주도적인 학습목표를 달성시키기 위한 목적으로 개발 및 구현되었다. 그러나 이를 사용하기 위해서는 사용자의 시스템이 정보를 제공하는 서버와의 정보 교환을 위해 통신이 항상 서로 교류하고 있는 상태를 유지해야하고, 사용자가 새로이 갱신된 학습정보를 접속하기 위해서는 서버에 항상 찾아가 정보를 찾아 접속해야만 갱신된 정보를 확인할 수가 있었다. 본 연구는 이를 반영하여 XML(extensible Markup Language)을 기반으로 한 웹 캐스팅기법으로 웹 코스웨어를 구연하였으며, 이를 적용하기 위해 CDF(Channel Definition Format)형식을 사용하였다. 채널을 사용하여 학습자의 자율적으로 채널을 선택하면 새로이 갱신된 정보가 자동적으로 학습자의 시스템에 저장되도록 구현하였다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.10b
• /
• pp.568-570
• /
• 2000

컴퓨터를 이용한 인터넷의 급속한 발전에 따라 이를 교육에 응용하려는 노력은 최근 몇 년 동안 지속적으로 진행되어 왔다. 이는 인터넷 이용인구의 급속한 증가로 인하여 웹 상에서의 가상교육 및 원격교육에 관한 필요성이 증대되었고, 이를 실용화하려는 노력은 여러 가지 방법을 통하여 논의되어 왔다. 따라서, 웹 코스웨어는 인터넷을 통한 원거리 학습자들에 대하여 학습욕구를 충족시키기 위한 목적으로 구현 및 개발되었다. 그러나, 이를 이용하려면 사용자의 시스템이 정보를 제공하는 서버와의 정보교환을 위하여 온라인 상태를 유지하였으며, 학습자가 서버에서 갱신되는 학습정보를 받아 보려면 온라인 상에서 학습자의 시스템이 서버로 접속이 이루어져야만 확인이 가능하였다. 본 논문은 이에 관하여 XML(eXtensible Markup Language)을 기반으로 한 웹 캐스팅 기법으로 웹 코스웨어를 구현하였으며 이를 위하여 CDF(Channel Definition Format) 형식을 이용하였다. 즉, 채널을 용하여 학습자가 자율적으로 채널을 선택하면, 학습자가 원하는 정보를 자동적으로 갱신되도록 하였다. 또한, 기존의 웹 코스웨어는 정보를 제공하는 서버의 학습내용이 변화될 때다 일일이 확인을 하여야 하는 반면 본 논문에서는 갱신되어진 내용을 학습자에게 자동적으로 업데이트되도록 하였다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.07b
• /
• pp.844-846
• /
• 2005

본 논문에서는 3차원 모델을 검색하기 위한 형태 기반 기술자를 추출하는 알고리즘을 제안한다. 제안하는 알고리즘은 모델의 기하학적인 특성을 고려하여 레이 캐스팅 샘플링과 구면조화함수를 이용하는 방법이다. 레이 캐스팅 기법은 모델의 외형을 고려한 적응적인 방법으로 샘플링 하여 기술자에 포함되는 형태 정보를 증가시켜 기술자의 식별성을 높인다. 또한 구면조화함수 계수 추출에서는 기하학적인 주파수 특성을 고려하여 적응적인 계수를 추출한다. 이 방법은 검색 성능에 영향을 미치지 않고 기술자를 조밀하고 간결하게 만든다. 최종적으로 두 방법을 결합함으로써 검색 엔진에서 이용 가능한 기술자를 생성한다. 실험 결과에서는 제안된 알고리즘의 성능이 기존 방법에 비해 약 $12.5\%$ 향상 된 것을 확인 할 수 있다.

• Journal of Pharmaceutical Investigation
• /
• v.30 no.4
• /
• pp.295-297
• /
• 2000

A new method to evaluate erosion of biodegradable polymer, polyanhydrides, was developed. The polymer devices were prepared with the melt-casting method and weight loss was accurately measured after agitating the devices in buffers (pH 1-9), and removing the device at selected time intervals and freeze-drying the device. The erosion rate was estimated from the plot of the weight loss(%) of device as a function of time. The freeze-drying technique used in this study is particularly useful for estimating the erosion rate of biodegradable polymer.

• Journal of Radiation Industry
• /
• v.7 no.2_3
• /
• pp.141-147
• /
• 2013

The simple and facile radiation technique of the preparation of antibacterial biodegradable polymer films containing silver nanoparticles (Ag NPs) was described. The biodegradable poly(butylene adipate-co-terephthalate) (PBAT) films containing silver trifluoroacetate (Ag TFA) were prepared by a solvent casting method, and then the films were irradiated by electron beams at the various doses ranging from 20 to 200 kGy to form Ag NPs in the biodegradable polymers. The results of UV-vis and FE-SEM/EDX analyses revealed that the Ag NPs were successfully formed in the PBAT matrix during the electron beam irradiation, and their amounts were dependant on the absorbed dose and Ag TFA concentrations. Furthermore, on the basis of the results of the antibacterial test through disk diffusion and colony counting test, the irradiated PBAT/Ag TFA films exhibited the antibacterial property due to the formation of Ag NPs.