• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 춘계학술대회 논문집
• /
• pp.620-625
• /
• 1995

Finite element analysis tool was developed to analyze the casting process. Generally, casting processes consists of mold filling and solifification. In order to investigate the effects of process variables and to predict the defects, both filling and solidiffication process were simulated simultaneously. At filling process, especiallywe consider thermal coupling to investigate thermal history of material during the filling stage. And thermal condition at the final stage of filling is used as the initial conditions in a solidification process for the exact simulation of the actual casting processes. At mold filling process, Lagrangian-type finite element method with automatic remashing scheme was used to find the material flow. To avoid numerical instability in low viscous fluid, a perturbation method with artificial viscosity is adopted. At solififfication process, enthalpy-based finite element method was used to solve the heat transfer problem with phase change. And elastic stress analysis has been performed to predict the thermal residual stress. Through the FE analysis, solidiffication time, position of solidus line, liquidus line and thermal residual stress are studied. Finite element tools developed in this study will be used process design of casting process and maybe basic structure for total CAE system of castigs which will be constructed afterward.

• 한국분말재료학회지
• /
• 제25권3호
• /
• pp.246-250
• /
• 2018

In this study, we investigate the deformation behavior of $Hf_{44.5}Cu_{27}Ni_{13.5}Nb_5Al_{10}$ metallic glass powder under repeated compressive strain during mechanical milling. High-density (11.0 g/cc) Hf-based metallic glass powders are prepared using a gas atomization process. The relationship between the mechanical alloying time and microstructural change under phase transformation is evaluated for crystallization of the amorphous phase. Planetary mechanical milling is performed for 0, 40, or 90 h at 100 rpm. The amorphous structure of the Hf-based metallic glass powders during mechanical milling is analyzed using differential scanning calorimetry (DSC) and X-ray diffraction (XRD). Microstructural analysis of the Hf-based metallic glass powder deformed using mechanical milling reveals a layered structure with vein patterns at the fracture surface, which is observed in the fracture of bulk metallic glasses. We also study the crystallization behavior and the phase and microstructure transformations under isothermal heat treatment of the Hf-based metallic glass.

• 헤리티지:역사와 과학
• /
• 제53권2호
• /
• pp.4-23
• /
• 2020

이 연구는 우리나라 철 주조기술의 다양성과 기술 체계를 규명하기 위한 목적으로 진행되었으며, 이를 위해 고문헌 조사 및 유물 분석, 제작 도구와 제작 기술에 대한 현지 조사 그리고 주조와 거푸집에 사용된 재료의 과학 분석 등을 실시하였다. 불미기술은 송풍구인 풀무를 이용하여 주철을 녹인 뒤 그 쇳물을 토제 거푸집에 부어 주물을 완성하는 철 주조기술로 현재 유일하게 제주도에서만 전승되고 있는데, 모래 거푸집을 사용하는 육지와 비교해 토제 거푸집을 사용하고 있다는 것이 큰 차이점이라 할 수 있다. 무쇠솥 주조기술에는 석비레, 모래, 점토 등을 섞어 만든 모래 거푸집을 이용한 주물사주조법(鑄物砂鑄造法)과 점토에 볏짚과 갈대 등을 섞어 만든 토제 거푸집을 이용한 도토주조법(陶土鑄造法)이 사용되고 있다. 주물사주조법에 의한 무쇠솥 주조는 거푸집 만들기, 속심 제작, 쇳물 작업, 거푸집에 쇳물 붓기, 완성품 다듬기 등 5단계의 작업공정을 거치며, 도토주조법에 의한 무쇠솥 주조는 거푸집 만들기, 거푸집 굽기, 질먹 입히기, 쇳물 작업, 쇳물 붓기, 완성품 다듬기 등 크게 6단계의 작업 공정으로 이루어진다. 두 주조법은 거푸집의 재료, 거푸집을 불에 굽고 질먹을 입히는 제작 공정에서 차이를 보인다. 이번에 연구한 불미기술은 토제 거푸집 무쇠솥 주조로 진흙 채취 및 반죽, 거푸집 제작, 초벌 굽기, 화적모살 및 질먹 바르기, 건조 및 비얄질, 거푸집 합장, 둑(용광로)제작, 재벌 굽기, 제련, 쇳물 붓기, 주물 다듬기 등 단계별 주조 공정에 사용된 재료 및 도구 분석과 제작 기술에 담겨진 과학 기술 원리를 규명하여 우리 고유 철 주조기술의 기술 체계를 밝혀 보았다. 그리고 무쇠솥 도토주조를 위해 이용한 재료와 완성품을 과학 분석한 결과, 거푸집은 주성분이 SiO₂, Al₂O₃, Fe₂O₃으로 이루어진 진흙과 모래이고, 이형재는 SiO₂, Al₂O₃, Fe₂O₃, K₂O가 함유된 흑연이며, 완성된 무쇠솥의 미세 조직은 시멘타이트(Fe₃C)와 펄라이트(페라이트와 시멘타이트의 층상 구조)로 이루어진 백주철 조직임을 확인하였다.

• 대한화학회지
• /
• 제25권3호
• /
• pp.140-144
• /
• 1981

추진제 성형에 쓰이는 isophorone diisocyanate의 구조와 반응성을 EHT, DNDO/2 및 STO-3G 방법으로 고찰하였다. 반응성은 -NCO기의 탄소원자의 양전하로 결정되며, 이 화합물의 구조는 반응성이 느리고 균일한 matrix 성형이 이루어지도록 되어 있는 것을 알았다.

• 한국주조공학회지
• /
• 제40권3호
• /
• pp.61-65
• /
• 2020

Rheo-diecasting with stirring has been used in many material industries. As the 4th Industrial Revolution approaches the world, eco-friendly high-strength and light-weight materials become more important. Casting methods have been studied and used for aluminum-alloy automobile parts. This study carried out the effect analysis of the micro-structure and mechanical properties, such as yield/ultimate tensile strength, elongation, and hardness, of A356 using the 6-pole EMS (electro-magnetic stirring) casting process with a high electromagnetic force. As a result, the hardness and elongation of the A356 after T6 heat-treatment show a significant improvement, respectively, by 20% and 50%.

• 한국주조공학회지
• /
• 제14권5호
• /
• pp.464-470
• /
• 1994

The horizontal continuous casting method with the heated mold was applied to study the solidification structures of the pure Al and Al-0.5wt%Si and Al-1.0wt%Si alloy rods. The results could be summarized as follows: 1. The S/L interface structures of pure Al represented the hexagonal cells at the casting speed of 590 and 350mm/min, respectively. However, the hexagonal cells became irregular as the casting speed and(or) Si amount increased. 2. The striation increased as the Si amount and casting speed increased and was found to result from the occurrence of growth twin crystals by XRD analysis. 3. The striation did not affect the mechanical and electrical property of the drawn wire from the casted rod. This means the striation is not a serious defect which has to consider in the production of micro-sized fine wire in the drawing process.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.193-197
• /
• 2002

In this study, the casting/forging process was applied to the Shift-Fork, a manual transmission part of automobiles. In the casting experiments, the effects of additives, Sr, Ti＋B and Mg, on the mechanical properties and the microstructure of a cast preform were investigated. When 0.03% Sr were added into the molten aluminum alloy, the finest silicon-structure was observed in the cast preform and the highest tensile strength and elongation accomplished. And when 0.2% Ti＋B were added into the molten Al-Si alloy, the highest values of tensile strength were obtained. The maximum hardness was in case of 0.2% Mg. In the forging experiment, it was confirmed that the optimal configuration of the cast preform could be predicted by FE analysis. To minimize the cost as the press size, the compact shape of preform was proposed to reduce the volume of flash. The modification of shape in designing preform was performed to attain a satisfactory performance in the areas where the mechanical strength were more required. By using FVM(Finite Volume Method) software, it was verified that a proposed casting design was available. To identify the relationship between effective strain and mechanical properties of the final forged product, the compression test was performed. As the result, the tensile strength and elongation of a cast preform were much higher than before forging. The minimum forging temperature was found 40$0^{\circ}C$ to save heating time.

• 한국정밀공학회지
• /
• 제13권3호
• /
• pp.110-122
• /
• 1996

Finite element analysis tool was developed to analyze the casting process. Generally, casting process consists of mold filling and solidification. Both filling and solidication process were simulated simultaneously to investigate the effects of process variables and to predict the defect. At filling process, thermal coupling was especially considered to investigate thermal history of material during the filling stage. And thermal condition at the final stage of filling is used as the initial conditions in a solidification process for the exact simullation of the actual casting processes. At mold filling process, Lagragian-type finite element method with automatic remeshing scheme was used to find the material flow. A perturbation method with artificial viscosity is adopted to avoid numerical instability in low viscous fluid. At solidification process, enthalpy-based finite element method was used to solove the heat transfer problem with phase change. And elastic stress analysis has been performed to predict the thermal residual stress. Through the FE analysis, solidification time, position of solidus line, liquidus line and thermal residual stress are found. Through the study, the importance of combined analysis has been emphasized. Finite element tools developed in this study will be used process design of casting process and may be basic structure for total CAE system of castings which will be constructed afterward.

• 한국주조공학회지
• /
• 제29권2호
• /
• pp.64-69
• /
• 2009

In the present study the effect of cooling rate during solidification on the microstructural characteristics of Al-xAg (x = 31, 33, 35 at.%) in-situ binary eutectic composites has been investigated. To provide a wide range of cooling rate three different casting techniques, i.e. conventional casting, injection casting, and melt spinning have been used. The observed microstructure is very much dependent on the cooling rate. The fcc ${\alpha}$-Al and hcp $Ag_2Al$ phases exhibits an orientation of (111)Al//(0001)$Ag_2Al$, [1-10]Al//[11- 20]$Ag_2Al$. The microstructure of the melt-spun samples contains Widmanstatten structure resulting from solid-state transformation and nano scale two-phase structure resulting from solid-state phase separation. The microstructure of injection-cast samples contains eutectic structure and solid state phase-separated structure. On the other hand, conventional-cast samples exhibit a microstructure consisted of plate-type eutectic structure.

• 한국주조공학회지
• /
• 제39권5호
• /
• pp.87-93
• /
• 2019

The effects of mold materials on the microstructure and tensile properties were investigated to develop a mass production technique of aluminum alloy parts with excellent mechanical properties using a lost foam casting method. The microstructures of the plate-shaped cast alloy showed a tendency to be finer in proportion to the thickness of the plate, and a remarkably fine structure was obtained by applying a steel chill or a ball as a mold material compared to general sand. When a steel ball was used, it was observed that the larger the ball, the finer the cast structure and the better the tensile properties. The microstructure and tensile properties of the cast parts with complex shapes were greatly affected by the gating system, but the positive effects of the steel chill and the steel ball as a mold material were clear.