• The Journal of Korean Association of Computer Education
• /
• v.8 no.5
• /
• pp.109-118
• /
• 2005

In this paper, we present a music retrieval system that compares the geometric structure of a melody specified by a user with those in a music database. The system finds matches between a query melody and melodies in the database by analyzing both structural and contextual features. The retrieval method is based on the geometric hashing algorithm which consists of two steps; the preprocessing step and the recognition step. During the preprocessing step, we divide a melody into several fragments and analyze the pitch and duration of each note of the fragments to find a structural feature. To find a contextual feature, we find a main chord for each fragment. During the recognition step, we divide the query melody specified by a user into several fragments and search through all fragments in the database that are structurally and contextually similar to the melody. A vote is cast for each of the fragments and the music whose total votes are the maximum is the music that contains a matching melody against the query melody. Using our approach, we can find similar melodies in a music database quickly. We can also apply the method to detect plagiarism in music.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.2
• /
• pp.177-185
• /
• 2008

Low-cycle environmental fatigue tests of cast austenitic stainless steel CF8M at the condition of fatigue strain rate 0.04%/sec were conducted at the pressure and temperature, 15MPa, $315^{\circ}C$ of a operating pressurized water reactor (PWR). The used test rig was limited to install an extensometer at the gauge length of the cylindrical fatigue specimen inside a small autoclave. So the magnet type LVDT#s were used to measure the fatigue displacement at the specimen shoulders inside the high temperature and high pressure water autoclave. However, the displacement and strain measured at the specimen shoulders is different from the one at the gauge length for the geometry and the cyclic strain hardening effect. Displacement of the fatigue specimen gauge length calculated by FEM (finite element method) used to modify the measured displacement and fatigue life at the shoulders. A series of low cycle fatigue life tests in air and PWR conditions simulating the cyclic strain hardening effect verified that the FEM modified fatigue life was well agreed with the simulating test results. The process and method developed in this study for the environmental fatigue test inside the small sized autoclave would be so useful to produce reliable environmental fatigue curves of CF8M stainless steel in pressurized water reactors.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.7
• /
• pp.905-910
• /
• 2010

Exhaust manifolds are the first structures to be developed by hydroforming; mass production of exhaust manifolds by this method will be possible soon. This is obviously related with tight emission regulation induced by environmental problems commonly for both domestic and worldwide and standards, thus evoking its solution for domestic automakers. Compared to conventional cast products, thin-gauge tubular hydroformed exhaust manifold have superior features; for example, in the hydroformed exhaust manifold, gas decomposition during the cold-start period of the engine is reduced by lowering the heat sink, and manufacturing process is simplified since less welding is involved. The aim of this study is to develop a hydroformed exhaust manifold; the study deals with the components, the hydroforming process, and tool design of the manifolds. The performance of the exhaust system is evaluated by performing flow analysis, heat-transfer analysis, heat-stress analysis, and fatigue analysis by using a computer.

• Steel and Composite Structures
• /
• v.36 no.3
• /
• pp.261-272
• /
• 2020

A novel precast concrete-encased steel composite beam, which can be abbreviated as PCES beam, is introduced in this paper. In order to investigate the shear behavior of this PCES beam, a test of eight full-scale PCES beam specimens was carried out, in which the specimens were subjected to positive bending moment or negative bending moment, respectively. The factors which affected the shear behavior, such as the shear span-to-depth aspect ratio and the existence of concrete flange, were taken into account. During the test, the load-deflection curves of the test specimens were recorded, while the crack propagation patterns together with the failure patterns were observed as well. From the test results, it could be concluded that the tested PCES beams could all exhibit ductile shear behavior, and the innovative shear connectors between the precast concrete and cast-in-place concrete, namely the precast concrete transverse diaphragms, were verified to be effective. Then, based on the shear deformation compatibility, a theoretical model for predicting the shear capacity of the proposed PCES beams was put forward and verified to be valid with the good agreement of the shear capacities calculated using the proposed method and those from the experiments. Finally, in order to facilitate the preliminary design in practical applications, a simplified calculation method for predicting the shear capacity of the proposed PCES beams was also put forward and validated using available test results.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.5
• /
• pp.556-560
• /
• 2001

Remote field eddy current testing (RFECT) with through-wall transmission characteristic is being applied to pipes ranging from small tubes of heat exchanger to natural gas supply pipelines. Cast iron pipes with nominal diameter of 100mm are used primarily as the waterline pipes. The leakage of water occurs due to defects in the pipes caused by vibration of automobiles and corrosion. But, the use of direct inspection methods such as insertion of inspection equipment inside the pipelines has been limited due to its lack of economical efficiency. Economical development of inspection equipments is possible since RFECT method can be easily employed for system integration and quantitative evaluation of both inside and outside defects. In this study, the development of underground pipeline inspection system was tarried out by using RFECT method in consideration of the characteristics of waterline network. This paper specifically describes the design and production of RFECT pipeline inspection pig using centralizer mechanism, development of remote field eddy current signal acquisition and processing software, and review of RFECT system operation procedures.

• International Journal of Precision Engineering and Manufacturing
• /
• v.5 no.3
• /
• pp.35-42
• /
• 2004

This research describes that the cutting characteristics and tool wear behavior in the micro cutting of three kinds of wear resistant cemented carbides (WC-Co; V40, V50 and V60) using PCD (Poly Crystalline Diamond) and PCBN (Poly crystalline Cubic Boron Nitride) cutting tools by use of the SEM (Scanning Electron Microscope) direct observation method. The purpose of this research is to present reasonable cutting conditions from the viewpoint of high efficient cutting refer to a precise finished surface and tool wear. Summary of the results is as follows: (1) The cutting forces tend to increase as the increase of the weight percentage of WC particles, and the thrust forces was larger than the principal forces in the cutting of WC-Co. These phenomena were different from the ordinary cutting such as cutting of steel or cast iron. (2) The cutting speed hardly influenced the thrust force, because of the frictional force between the cutting tool edge and small WC particles at low cutting speed region such as 2$\mu\textrm{m}$/s. It seemed that the thrust cutting force occurred by the contact between the flank face and work material near the cutting edge. (3) The wear mechanism for PCD tools is abrasion by hard WC particles of the work materials, which leads diamond grain to be detached from the bond. (4) From the SEM direct observation in cutting the WC-Co, it seems that WC particles are broken and come into contact with the tool edge directly. This causes tool wear, resulting in severe tool damage. (5) In the orthogonal micro cutting of WC-Co, the tool wear in the flank face was formed bigger than that in the rake face on orthogonal micro cutting. And the machining surface integrity on the side of the cutting tool with a negative rake angle was better than that with a positive one, as well as burr in the case of using the cutting tool with a negative rake angle was formed very little compared to the that with a positive one.

• Journal of Food Hygiene and Safety
• /
• v.11 no.4
• /
• pp.315-321
• /
• 1996

Various antimicrobial drug screen tests have been used in order to ensure food safety. However, the conventional screen tests, the Swab Test on Premises(STOP, USA), the Calf Antibiotic and Sulfa Test(CAST, USA) and the European Economic Community 4-plate Test(FPT, EU) are not sufficiently rapid or sensitive enough to detect low levels of sulfa drugs in meat. We developed a new screen test kit for the determination of the antimicrobial residues in meat called the Bacillus megaterium Disk Assay(BmDA). A comparison of BmDA with the older screen tests showed BmDA was as good as the older ones with several advantages. The new test kit is faster-it can be read in 4∼6 hours instead of 16∼18 hours. Moreover, BmDA can discriminate sulfa drugs from other antimicrobial drugs because p-aminobenzoic acid countacts the inhibiting action of sulfa drugs. Minimum detectable levels of sulfa drugs were significantly improved at the lever of 0.025*0.1 pp, compared with the level of 1.0 ppm in FPT. A comparison of BmDA with the older screen tests in HPLC confirmed meat samples exceeded the Korean tolerance value of 0.1 ppm showed BmDA was the most sensitive in the microbiological screen tests. As the microbiological screen tests have already known, a person familiar with simple laboratory techniques should have no difficulty in using it to detect antimicrobial residues in meat. This would be a simple, economic method of antimicrobial residues detection which might be succesfully used by many laboratories.

• Conservation Science in Museum
• /
• v.12
• /
• pp.59-69
• /
• 2011

The conservation treatment and production technique of Yongmuntujoeunpanpi-Angyo(Saddle Ornament) at Hwangnamdaechong were: The conservation treatment removed foreign material by using both chemical method and physical method to reinforce and to recover area by jointing that was destroyed and weakened. Not only Angyogeumgu but also Jwamokseongeumgu was made of 99wt% or more silver (Ag), and Wondujeong, Naeyeongeumgu and Bokryung were produced by amalgam gold plaiting. Not only Angyogeumgu but also Jwamokseongeumgu that was cast with silver plate was jointed by folding both and putting Naeyeongeumgu on it and then nailing gild ofwondujeong at specific interval. A tree that grew up in curve was used, and it was adhered by plain weave fabric of hemp cloth and wool.

• Nuclear Engineering and Technology
• /
• v.15 no.1
• /
• pp.1-10
• /
• 1983

By controlling both the means of grafting and the cast-solution components, no degradation and dimensional change of radiation-induced graft polymerization were found. The electric resistance of styrene-cellulose acetate grafts increases with increasing styrene content, while those for the hydrophilic monomers show no marked effect. In comparison with the grafted cellulose acetate membrane by simultaneous irradiation method, the appearance of the grafted membrane by post-polymerization method was not markedly changed irrespective of the percent of grafting and radiation dose of electron beam or ${\gamma}$-ray. The combination of crosslinking agents such as divinyl benzene (OB) or trimethyl propane triacrylate (TMPT) in the VP:St:BPO system leads to gradual increase of the percent of grafting. The activation energy for grafting of St:VP:BPO solution onto cellulose acetate membrane was determined to be about 21.8 Kcal/mole over the range of 55$^{\circ}$-8$0^{\circ}C$. The initial rate of grafting (in %/hr) is proportional to the power 0.76 for dose intensities.

• Journal of Adhesion and Interface
• /
• v.5 no.1
• /
• pp.29-35
• /
• 2004

We have prepared polyster/nanQhybridized polyimide films in the range of 1~9 wt% of organophilic synthetic layered silicate (STN). Firstly, poly(amic acid)/STN nanocomposite solutions were prepared via solution blending method in DMAc or THF/MeOH solution, and then cast on the polyester film followed by imidization reaction, thermal and chemical method repestively. XRD and TEM experiment showed that the STN was fully exfoliated through the polyimide matrix. Surface morphologies of nanohybridized polyimide films were characterized by AFM and thermal, mechanical properties were also confirmed by TGA, DMA and UTM each. And also, the water vapor permeabilities highly depended on the content of STN. The sample from chemical imidization route and THF/MeOH solvent system showed better water vapor barrier properties than thermal one and DMAc system.