• 한국재료학회지
• /
• 제9권2호
• /
• pp.199-204
• /
• 1999

As the engine design change to get high efficiency and performance of commercial diesel engine, surface wear of the cam follower becomes an important issues as applied load increasing at the contact face between cam follower and cam. Purpose of this study is the developing of the ceramic cam follower made of silicon nitride ceramic which is more wear resistant than the cast iron and sintered cam follower. Ceramic cam follower was made by direct brazing of thin ceramic disk to steel can follower body using active bracing alloy. Effect of joining condition on the interfacial phases and joining strength wer examined at bvarious joining temperatures, times, and cooling rates. Crowning resulted from the difference of thermal expansion coefficient after direct brazing without using any stress-relieving inter layer was measured. Interfacial phases are mainly titanium silicide and titanium nitride which are the products between active metal(Ti) in brazing alloy and silicon nitiride. Maximum joining strength of the ceramic metal joint, measured by DBS method, was 334MPa. Crowning(R) of the prototype ceramic cam follower was 1595mm. As machining for crowning is not necessary, production cost can be reduced.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.336-339
• /
• 2002

Fluorenevinylene-based EL polymers, poly(9,9-dioctylfluorene-2,7-vinylene) (PFV) and poly[(9,9-dioctylfluorene-2,7-vinylene)-co-{2-methoxy-5-(2 ethylhexyloxy)-1,4-phenylenevinylene}] (PFV-co-MEH-PPV), have been synthesized by Gilch polymerization method. The resulting polymers were soluble in common organic solvents and easily spin cast onto the indium-tin oxide (ITO) substrate. The weight average molecular weight and polydispersity of PFV and PFV-co-MEH-PPV were in the range of 22.2 - 43.2 x $10^4$ and 1.9 - 3.0, respectively. Double-layer light-emitting diodes with ITO/PEDOT/Polymer/Al configuration were fabricated. PFV-co-MEH-PPV showed better EL properties than those of PFV and MEH-PPV The turn-on voltage of poly(9,9dialkylfluorene) derivatives were dramatically decreased to the 2.5 V compared to fluorene-based EL polymers. The maximum brightness and luminescence efficiency were up 7 to 1350 cd/$m^2$ and 0.51 Cd/A.

• 한국건축시공학회지
• /
• 제12권2호
• /
• pp.230-242
• /
• 2012

Recently the Permanent Uni-wall System (PUS) has been developed which improved the disadvantage of the Cast-In-Place Concrete Pile (CIP) and could be used as permanent retaining wall. In this study, joints between PUS and floor systems were developed. From analyses of the characteristics of design and construction of PUS, shear friction reinforcements with couplers were adopted for shear design of the joints. Twelve types of joints were developed which were classified according to the types of floor structures, wale, and piles of PUS. Two typical joints were tested and the joints showed satisfactory behaviors on the points of shear strength, stiffness, and serviceability. Especially the shear strengths were much higher than the design strengths due to the shear keys which were by-products in splicing shear reinforcements. However, the shear strength of the joint is recommended to be designed by only shear friction reinforcement because shear key is not reliable and too brittle.

• 한국주조공학회지
• /
• 제24권2호
• /
• pp.108-114
• /
• 2004

$Al_2O_3$, SiC reinforced Al matrix composites were fabricated by centrifugal spray casting method and their wear resistance characteristics have been studied. Particles are generally uniformly distributed in the microstructure of as-cast specimens. In order to investigate the effect of secondary deformation, hot rolling was performed for each specimen of pure Al matrix composites with a reduction of 10, 20, 30, 40 and 50% at $400{\sim}500^{\circ}C$, respectively. Microstructure of specimen showed that particle distribution density and hardness increased because of increasing of reduction ratio. Wear test with a various sliding velocity of 1.98, 2.38, 2.88 and 3.53m/sec showed that the wear resistance characterization of composite improved remarkably compared to the normal alloy and performs without reinforced particles. Microstructural observation for the worn surface of pure Al specimens without particles showed that a change in wear mechanism seemed to separate layer by surface fatigue. In other case of Al composite reinforced with $Al_2O_3$ and SiC, the grinder type of wear mechanism was shown.

• 공업화학
• /
• 제10권3호
• /
• pp.445-449
• /
• 1999

소수성인 poly[bis(trifluoroethoxy)phosphazene]에 methoxyethylenoxy 측쇄를 치환시켜 친수성을 증가시킨 포스파젠 고분자를 합성하였으며 합성된 고분자를 다공성 polypropylene 지지체위에 dip-coating법으로 금속이온 분리막을 제조하였다. $Cr^{3+},\;Co^{2+},\;Mn^{2-}$이온 수용액에 대한 분리실험을 $25^{\circ}C$에서 $60^{\circ}C$까지 온도범위에서 행하였다. 치환된 methoxyethylenoxy기 중의 ethylenoxy의 반복단위가 증가할수록 이온의 투과특성이 증가하는 것을 알수 있었다. Trifluoroethoxy methoxyethoxyethoxyethoxy co-substituted polyphosphazene의 경우 $Cr^{3-}$ 이온이 $60^{\circ}C$에서 분리계수 4.5의 값을 갖고 $Co^{2+},\;Mn^{2+}$ 이온들로부터 분리가 됨을 알 수 있었다.

• 열처리공학회지
• /
• 제9권1호
• /
• pp.19-26
• /
• 1996

Melt-quenching of steels leads to various metallographic effects such as refinement of grain size, extension of the solid solubility of carbon and alloying elements, and is expected to improve the mechanical properties of conventional steels. Furthermore, this technique is a useful method for producing sheet directly from liquid state. And it will lend itself to development as a continuous cast process which offers significant savings in energy and product costs. The purpose of this study is to present the microstructures of melt-quenched austenitic stainless steels. As the results of this study, the morphology of melt-quenched microstructure show that the roll contact area is columnar structure, and the free surface area is dendrite structure. As the line speed increases, the ratio of $d_{colunnar}/d_{total}$ increases from 0.12 to 0.60, but the ribbon thickness decreases from $150{\mu}m$ to $30{\mu}m$.

• Restorative Dentistry and Endodontics
• /
• 제39권3호
• /
• pp.220-225
• /
• 2014

A fiber-reinforced composite (FRC) fixed prosthesis is an innovative alternative to a traditional metal restoration, as it is a conservative treatment method. This case report demonstrates a detailed procedure for restoring a missing anterior tooth with an FRC. A 44-year-old woman visited our department with an avulsed tooth that had fallen out on the previous day and was completely dry. This tooth was replanted, but it failed after one year. A semi-direct technique was used to fabricate a FRC fixed partial prosthesis for its replacement. The FRC framework and the pontic were fabricated using a duplicated cast model and nanofilled composite resin. Later on, interproximal contact, tooth shape, and shade were adjusted at chairside. This technique not only enables the clinician to replace a missing tooth immediately after extraction for minimizing esthetic problems, but it also decreases both tooth reduction and cost.

• 한국주조공학회지
• /
• 제17권3호
• /
• pp.267-275
• /
• 1997

Fabrication of high strength Mg-Li-Al alloys by squeeze casting was established by the stabilization of melt and mold temperatures, applied pressure and the refining method. The entrapment of inclusions during pouring was prevented using 30 ppi alumina foam filter. The as-cast microstructure consists of a mixture of ${\alpha}$ and ${\beta}$ phases including AILi and $MgLi_2$, Al particles, which are distributed in the ${\beta}$ matrix. The grain sizes of gravity and squeeze casting alloys were 288 ${\mu}m$ and 207 ${\mu}m$ respectively. The addition of Al in Mg-Li alloys promoted the formation of second phase particles, which were adjusted to optimize the properties of Mg-Li-Al alloys. The Mg-10wt%Li-5wt%Al alloy after heat treatment at $350^{\circ}C$ for 1 hour showed the maximum hardness value. This is due to the facts that the amounts of ${\alpha}$ and ${\beta}$ phases and their distributions are dependent upon the solution treatment temperature, and that the amounts of AILi and $MgLi_2Al$ particles are dependent upon the Al content.

• 대한가정학회지
• /
• 제30권3호
• /
• pp.63-77
• /
• 1992

The purpose of this study is to improve clothing construction by analyzing form variation of upper trunk & upper arms with the use of plaster cast. Experimental research was performed by plaster gypsum method. The subjects were males between age 21 and 25, classified Standard somatotype by their bust size and Rorher Index. Arm movements were consisted of 5 types(0$^{\circ}$, 45$^{\circ}$, 90$^{\circ}$, 135$^{\circ}$, 180$^{\circ}$) to each vertical motion in front. The statistical analyses used in this study were mean, standard deviation, repeated mesure design. The result obtained from this study were as follows; 1. As a result of investigating into the rate of the expantion and contraction of basic body-surfact-lines, the side seam length showed the maxium rate of expantion in 180$^{\circ}$ degrees, the shoulder length showed the maxium contraction in the same degrees. 2. The variation of the upper part of the body form by increasing the upper limb motions, shoulder point was moved to be the inside or upside. And the anterior armfit point, posterior armfit point and armfit point were moved to upside. The form of the armhole-line in Drafts of a body surface was differently changed by increasing the movements. 3. Increasing the upper limb motions, the height of sleeve cap decresed and width of the sleeve decreased but girths of the sleeve cap was not show consistant change.

• 대한치과보철학회지
• /
• 제55권1호
• /
• pp.32-37
• /
• 2017

본 증례에서는 소수 잔존치를 가진 환자에 있어 새로운 인상 채득법을 이용해 국소의치를 제작하였다. 이 방법에서는 McLean의 기능인상법의 개념에 따라 임시 의치를 이용한 기능 인상채득 후에 비가역성 하이드로콜로이드로 overimpression을 채득하였다. 이러한 방법은 모델링 컴파운드를 사용한 변연 형성의 필요성이 없으며, 짧은 시간에 과연장되지 않은 의치 인상을 채득할 수 있으며 개인 트레이가 정확하게 적합된다는 유용성이 있다.