• Journal of the Institute of Electronics Engineers of Korea SP
• /
• 제38권2호
• /
• pp.138-148
• /
• 2001

Digital Video (DV) coding standards for digital video cassette recorder are based mainly on DCT and variable length coding. DV has low hardware complexity but high compressed bit rate of about 26 Mb/s. Thus, it is necessary to encode video with low complex video coding at the studios and then transcode compressed video into MPEG-2 for video-on-demand system. Because these coding methods exploit DCT, transcoding in the DCT domain can reduce computational complexity by excluding duplicated procedures. In transcoding DV into MPEC-2 intra coding, multiplying matrix by transformed data is used for 4:1:1-to-4:2:2 chroma format conversion and the conversion from 2-4-8 to 8-8 DCT mode, and therefore enables parallel processing. Variance of sub block for MPEG-2 rate control is computed completely in the DCT domain. These are verified through experiments. We estimate motion hierarchically using DCT coefficients for transcoding into MPEG-2 inter coding. First, we estimate motion of a macro block (MB) only with 4 DC values of 4 sub blocks and then estimate motion with 16-point MB using IDCT of 2$\times$2 low frequencies in each sub block, and finish estimation at a sub pixel as the fifth step. ME with overlapped search range shows better PSNR performance than ME without overlapping.

• Journal of Embryo Transfer
• /
• 제33권3호
• /
• pp.129-137
• /
• 2018

Acute vascular rejection has been known as a main barrier occurring in a xenograted tissue of alpha 1,3-galactosyltransferase knock-out (GalT KO) pig into a non-human primate (NHP). Adenosine which is a final metabolite following sequential hydrolysis of nucleotide by ecto-nucleotidases such as CD39 and CD73, act as a regulator of coagulation, and inflammation. Thus xenotransplantation of CD39 and CD73 expressing pig under the GalT KO background could lead to enhanced survival of recipient NHP. We constructed a human CD39 and CD73 expression cassette designed for endothelial cell-specific expression using porcine Icam2 promoter (pIcam2-hCD39/hCD73). We performed isolation of endothelial cells (pAEC) from aorta of 4 week-old GalT KO and membrane cofactor protein expressing pig ($GalT^{-MCP/-MCP}$). We were able to verify that isolated cells were endothelial-like cells using immunofluorescence staining analysis with von Willebrand factor antibody, which is well known as an endothelial maker, and tubal formation assay. To find optimal condition for efficient transfection into pAEC, we performed transfection with GFP expression vector using four programs of nucleofection, M-003, U-023, W-023 and Y-022. We were able find that the program W-023 was optimal for pAEC with regard to viability and transfection efficiency by flow cytometry and fluorescent microscopy analyses. Finally, we were able to obtain $GalT^{-MCP/-MCP}/CD39/CD73$ pAEC expressing CD39 and CD73 at levels of 33.3% and 26.8%, respectively. We suggested that pACE isolated from $GalT^{-MCP/-MCP}$ pig might be provided as a basic resource to understand biochemical and molecular mechanisms of the rejections and as an alternative donor cells to generate $GalT^{-MCP/-MCP}/CD39/CD73$ pig expressing CD39 and CD73 at endothelial cells.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1621-1621
• /
• 2001

The quality of sugarcane grown on the NE Australian tropical coast ($16^{\circ}$15'- $18^{\circ}$15' S Lat.) has declined markedly in the past seven years. This has been linked to dilution of mill-supply cane with increasing levels of non mature-stalk material consisting of leaves and sucker culms. The prime research objective was to examine the transition from the pre-harvest, in-field crop to harvested material sent for processing, in terms of quality and crop fraction proportions. A secondary objective was to quantify the effects of preharvest-season crop habit and culm condition on crop quality. Ten quadrat samples from each of 54 random crop sites (17 in 1999 and 37 in 2000), covering a wide range of variables (cultivar, crop class, and edaphic, topographic, climatic, and temporal factors) were collected immediately before harvest. Samples were partitioned into four fractions:- sound and unsound mature stalks (culms), sucker culms, and extraneous matter (leaves). Material harvested from each site was sampled and partitioned into four fractions:- sound and unsound billets (culm pieces), culm-spindle pieces, and leaf. In 2000, before harvest, 14 additional sites were sampled monthly, on three occasions, from March - June. Erect and non-erect culms were divided into sound and unsound classes. All samples were disintegrated and presented to a remote reflectance module of a scanning spectrophotometer using the BSES large cassette module. Near infra-red spectroscopic (NIS) analyses were developed for the rapid determination of quality components (Brix, commercial cane sugar (CCS), fibre, moisture, and polariscope reading). Calibrations for three material groups (culm (n = 639), non-culm (n = 496), and combined) were developed for all components using the 1999 data set. Two sub-sets (n = 178, and 190) of about 10% of the preharvest-season and harvest populations scanned in 2000 also were subjected to full routine laboratory analyses. The 1999 combined calibrations were excellent, but the culm calibrations produced consistently lower standard errors. Non-culm calibrations were marginally better than the combined for only CCS and pol. reading. Analysis of the 2000 culm data with calibrations using all 1999 and 2000 culm data resulted in better predictions relative to the 1999 culm calibrations. This also was true for the combined calibrations. Assessment of quality components in pre- and post-harvest sugarcane using NIS calibrations was more cost effective than using routine laboratory techniques. Outcomes from this NIS-facilitated research will have important economic consequences for the Australian sugarcane industry. Potential CCS present in mature culms is being discounted by dilution with leaves and sucker culms, threatening farm viability. The results question the efficacy of current harvesting technology. The CCS of harvested cane is improved only marginally over that of the in-field crop. Current harvesting technology requires either supplementary, innovative pre-mill processing or a design revolution to improve mill-supply cane quality, and therefore whole of industry economics. NIS-facilitated analyses, before the harvest season, highlighted the benefits of growing erect, sound crops. Loss of CCS then, can be minimized only by a combination of crop improvement and agronomic solutions, applied as part of sound on-farm management.

• Progress in Medical Physics
• /
• 제29권1호
• /
• pp.1-7
• /
• 2018

The $TomoTherapy^{(R)}$ beam-delivery method creates helical beam-junctioning patterns in the dose distribution within the target. In addition, the dose discrepancy results in the particular region where the resonance by pattern of dose delivery occurs owing to the change in the position and shape of internal organs with a patient's respiration during long treatment times. In this study, we evaluated the dose pattern of the longitudinal profile with the change in respiration. The superior-inferior motion signal of the programmable respiratory motion phantom was obtained using AbChes as a four-dimensional computed tomography (4DCT) original moving signal. We delineated virtual targets in the phantom and planned to deliver the prescription dose of 300 cGy using field widths of 1.0 cm, 2.5 cm, and 5.0 cm. An original moving signal was fitted to reflecting the beam delivery time of the $TomoTherapy^{(R)}$. The EBT3 film was inserted into the phantom movement cassette, and static, without the movement and with the original movement, was measured with signal changes of 2.0 s, 4.0 s, and 5.0 s periods, and 2.0 mm and 4.0 mm amplitudes. It was found that a dose fluctuation within ${\pm}4.0%$ occurred in all longitudinal profiles. Compared with the original movement, the region of the gamma index above 1 partially appeared within the target and the border of the target when the period and amplitude were changed. Gamma passing rates were 95.00% or more. However, cases for a 5.0 s period and 4.0 mm amplitude at a field width of 2.5 cm and for 2.0 s and 5.0 s periods at a field width of 5.0 cm have gamma passing rates of 92.73%, 90.31%, 90.31%, and 93.60%. $TomoTherapy^{(R)}$ shows a small difference in dose distribution according to the changes of period and amplitude of respiration. Therefore, to treat a variable respiratory motion region, a margin reflecting the degree of change of respiration signal is required.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• 제6권1호
• /
• pp.97-108
• /
• 1996

A new type of passive samplers were designed and produced by authors. After evaluating the quality of activated carbon by measuring recovery rate of organic vapors and steadiness of sampling rate, activated carbon with 30 - 35 mesh produced by Company S in Korea was selected. In each passive sampler, an amount of 400 mg of the activated carbon was filled in 25-mm cassette and covered by fixed screen (or wire screen with 100 mesh). In addition to the fixed screen, a wind screen (or wire screen with 300 mesh) was also attached at outer face. The sampling rate of the new Korean passive samplers was estimated Conclusions obtained in the study are as follows. 1. Sampling rates of the newly developed Korean passive samplers were affected by sampling time. For n-hexane, sampling rates of 15- and 60-minute samples were 70.92 and 37.45 ml/min, respectively. Sampling rate of both 200- and 450-minute samples was 25.96 ml/min. It is concluded that, when passive samplers are used for measuring organic vapors, samples be collected longer than 60 minutes. 2. Sampling rate of the passive samplers was also affected by airborne concentration of organic vapors. Lower sampling rates were determined at level of 1/2 threshold limit values (TLVs) recommended by the American Conference of Governmental Industrial Hygienists (ACGIH). It is recommended that sampling rate of the passive samplers be obtained at site by measuring concentrations using both the NIOSH Method and passive samplers simultaneously. 3. When the passive samplers, which collected organic vapors, were exposed to clean air for five hours, there was no significant loss of organic vapors due to reverse diffusion. 4. When samples were stored at room temperature ($21.8{\pm}0.7^{\circ}C$) and refrigerator ($3.8{\pm}0.7^{\circ}C$), there was no significant difference in the accuracy of results. For trichloroethylene and n-hexane, accuracies were within 25 % at both temperatures until seven days. However, poor accuracy exceeding 25 % was indicated in toluene from the first day. It is recommended that samples be stored at freezing temperature below $0^{\circ}C$. 5. Sampling efficiency was significantly affected by direction of the passive samplers. Results of samplers facing wind and down, respectively, were compared. Lower amount of organic vapors were collected when the sampler was oriented down. It is recommended that, when air velocity is low in plants, the passive samplers be oriented to the wind. However, when air velocity is high, the passive samplers be oriented down.

• Journal of the Korean Society of Radiology
• /
• 제7권5호
• /
• pp.365-369
• /
• 2013

Intravenous injection is administered with radioactive medical isotopes to detect disease on Positron Emission Tomography (PET). In this case, typically, $^{18}FDG$ (Fluorodeoxyglucose) is used as a radioactive medicine. Cassette equipment is needed to synthesize deoxyglucose with $^{18}F$, produced by medical cyclotron. Production of radioactive medicine creates a lot of radiation, thus Hot Cell is used to shield a secondary radiation. We measured the radiation dosage flowing out of the hot cell during synthesis of $^{18}FDG$ or distribution. The purpose of this study is to provide the information of radiation dosage regarding the occupational exposure that unintentionally occurs during the synthesis of $^{18}FDG$. In conclusion, we confirmed the radiation dosage out of the hot cell during the $^{18}FDG$ synthesis. Especially, we observed that the radiation flowed out through the lead window, attached as a view port. Thus, it is considered that the improvement of a lead window is necessary in order to decrease the occupational exposure during the $^{18}FDG$ synthesis.

• Microbiology and Biotechnology Letters
• /
• 제47권4호
• /
• pp.667-672
• /
• 2019

We compared two integration systems for stable expression of heterologous genes in Saccharomyces cerevisiae. A Candida glabrata-derived gene was used as the selective marker for the Cre/loxP system, and XYLP, XYLB, GRE3, and XYL2 genes were used as model heterologous genes and ligated into the universal pRS-CMT vector. The resulting pRS-XylP, pRS-XylB, pRS-Gre3, and pRS-Xyl2 plasmids were sequentially integrated into yeast chromosome VII by four integration processes (marker rescue and gene integration). The four introduced genes were successfully expressed. Further, the pRS-PBG2 plasmid harboring expression cassettes for the four genes was constructed for one-step integration. The four genes that were introduced were stably maintained as a gene cluster and were simultaneously expressed. The one-step integration was more effective for the simultaneous integration and expression of the four genes related to xylan/xylose metabolism. This method will enable the generation of a useful biosystem through appropriate use of gene integration methods.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• 제7권2호
• /
• pp.196-208
• /
• 1997

This study was performed to estimate quartz contents in the both bulk and airborne dust samples and to determine particle size distribution of airborne dust from the selected foundry operations. Total dust samples were collected by a 37mm cassette and respirable by a 10 mm nylon cyclone. Particle size distributions were determined by a Marple's 8-stage cascade impactor at the melting, molding, shakeout and finishing operations. The presence of elements in the dust samples were confirmed by the scanning electron microscopy equipped with the energy dispersive x-ray spectrometry. The quartz contents were estimated using the intensity of the absorption peak of quartz at 799 cm-l by the Fourie Transformed Infrared Spectroscopy (FTIR). The results were as follows: 1. The analysis of data from cascade Impactor showed bimodal distributions of particle size at the melting, molding and shakeout operations. Mass median aerodynamic diameters for the distributions determined by histogram were $0.48-1.65{\mu}m$ for small and $13.43-19.58{\mu}m$ for large modes. In the dust samples collected at the finishing operations, however, only a large mode of $18.89{\mu}m$ was found. 2. The percentages of total to respirable dust concentration calculated from the impactor data ranged from 42 % to 66 %. The average concentrations of respirable dust by cyclone were $0.85-1.28mg/m^3$ collected from the workers, and were $0.23-0.56mg/m^3$ from the areas surveyed. Dust concentrations of personal samples were statistically significantly higher than those of area samples. The highest dust concentration was obtained from the personal samples of the finishing operation. 3. The mean percentages of silicon and oxygen estimated by SEM-EDXA in the bulk samples ranged from 35.83 % to 36.02 % and from 39.93 %-41.64 %, respectively. 4. The average quartz contents estimated by FTIR in the respirable dust from personal samples ranged from 4.32 % to 5.36 % and 4.54 % to 4.70 % in the bulk samples. No statistical difference of quartz content was found between foundry operations. In this study, quartz content was quantified by FTIR. Although no statistically significant difference in quartz content between airborne and bulk, samples and between different foundry operations was found, it is recommended that quartz content in the individual sample of respirable dust be analyzed and the results be used either to select an applicable quartz limits or to calculate the exposure limit. Further studies, however, are needed to compare the results by FTIR and XRD since it is reported that the quartz content determined by FTIR is different from that by XRD.

• Journal of Korean Home Economics Education Association
• /
• 제9권1호
• /
• pp.1-17
• /
• 1997

This study was conducted to obtain basic materials to improve the teaching method of Home Economics by theoretically looking into the supplementary teaching materials or implements usable in teaching Costume History area. And based on these data, the types and the applications of the supplementary teaching materials or implements highschool owned were examined. The subjects of this study were 111 Home Economics and Housework curriculum highschool teachers who give a lecture in the country by using self-administered questionnaires. SAS program was used to calculate frequency, percentage, average, standard deviation, and $\chi$(sup)2-test analysis. The results of the study were as follows； 1. Most of the highschool teachers used the school expenses for experiments in preparing the supplementary teaching materials or implements. 2. Of the supplementary teaching materials and implements concerning Costume History, visual implements such as slides and pictures were the mostly owned. CD and audio implements as cassette-tapes were not used. 3. Most of the teachers recognized the importance of the audio-visual teaching materials and implements concerning Costume History. 4. Among the audio-visual materials and implements concerning Costume History by which can be made by school teachers of Home Economics and Housework curriculum, the mostly used one was ‘cutting pictorials from magazines and newspapers’, and the next were ‘orbital materials’, and ‘copy the pictorials’, and the least was ‘recording from the radio’. 5. Most of the annual expenses assigned to the department of Home Economics was used in cooking practice, and the least of the expenses was assigned in buying audio-visual teaching materials and implements. 6. Time assigned to the area of Home Economics was for the most part one or two hours per week, and among this, time assigned to the history of western costume and the history ok korean costume was for the most part five to eight hours. 7. The areas that the highschool teachers felt difficulties mostly during clothing and textiles curriculum were ‘textiles’and the next were ‘knitting’, ‘western costume history’, and ‘korean clothing construction’. 8. The difficulties the highschool teachers faced while teaching Costume History were mostly that ‘the pictorials in the text is not fully explainable’, the next were ‘most of the supplementary teaching materials or implements are not owned’, ‘have to explain very much in a short time’, and ‘the lectural explanation is insufficient’. 9. The solution for the difficulties that the highschool teachers faced while teaching Costume History was mostly ‘the information, on which audio-visual materials and implements are distributed in the market, should be easy to obtain’, the next opinions were ‘the school should provide enough experiment and practice expenses to buy audio-visual materials and implements’, and ‘education facilities of the Home Economics Department should be the main aspects in improving the teaching methods and should give special lectures about it’.

• Biomedical Science Letters
• /
• 제26권3호
• /
• pp.230-237
• /
• 2020

Staphylococcus aureus (S. aureus) is known as a bacterium that can cause skin infections, respiratory system infections, and sinusitis; however, it can exist as a normal flora rather than a pathogen. Recently, methicillin-resistant S. aureus (MRSA) infections have emerged in the community as a new variant of community-associated (CA)-MRSA. In the present study, S. aureus and MRSA were isolated and cultured by collecting samples from facilities and environments where students and educational personnel have multiple contacts on university campuses; specifically, the nostrils and hands of college students were tested from July to September of 2019. The molecular properties of the isolated MRSA were analyzed, and the one MRSA strain was isolated from the university campuses. One MRSA that was isolated and cultured on campus was the mec complex group A and staphylococcal cassette chromosome (SCC) mec type II, which is a characteristic of healthcare-associated (HA)-MRSA, and SCCmec type V, which is a characteristic of CA-MRSA. This result was similar to other studies wherein the SCCmec type II was detected in SCCmec typing analysis in CA-MRSA. To confirm whether there is a new variant of CA-MRSA in the Republic of Korea, additional follow-up studies on the analysis of virulence factors of MRSA are needed by additionally separating CA-MRSA from the body parts of university students and educational personnel.