• Smart Structures and Systems
• /
• 제23권6호
• /
• pp.615-626
• /
• 2019

Inerter-based damping devices (IBBDs), which consist of inerter, spring and viscous damper, have been extensively investigated in vehicle suspension systems and demonstrated to be more effective than the traditional control devices with spring and viscous damper only. In the present study, the control performance on cable vibration reduction was studied for four different inerter-based damping devices, namely the parallel-connected viscous mass damper (PVMD), series-connected viscous mass damper (SVMD), tuned inerter dampers (TID) and tuned viscous mass damper (TVMD). Firstly the mechanism of the ball screw inerter is introduced. Then the state-space formulation of the cable-TID system is derived as an example for the cable-IBBDs system. Based on the complex modal analysis, single-mode cable vibration control analysis is conducted for PVMD, SVMD, TID and TVMD, and their optimal parameters and the maximum attainable damping ratios of the cable/damper system are obtained for several specified damper locations and modes in combination by the Nelder-Mead simplex algorithm. Lastly, optimal design of PVMD is developed for multi-mode vibration control of cable, and the results of damping ratio analysis are validated through the forced vibration analysis in a case study by numerical simulation. The results show that all the four inerter-based damping devices significantly outperform the viscous damper for single-mode vibration control. In the case of multi-mode vibration control, PVMD can provide more damping to the first four modes of cable than the viscous damper does, and their maximum control forces under resonant frequency of harmonic forced vibration are nearly the same. The results of this study clearly demonstrate the effectiveness and advantages of PVMD in cable vibration control.

• 한국전산유체공학회지
• /
• 제22권1호
• /
• pp.8-14
• /
• 2017

In this paper, separated flow characteristics is studied using the RANS(Reynold-averaged Navier-Stokes) modeling. The analysis is performed for the NASA's hump configuration which is the combination of a flat plate and a hump. This configuration was used in NASA's flow control workshop and it was one of validation cases for RANS and LES simulations. The separation occurs at the 65% of model length where a slot is positioned for the flow control. No flow control case and steady suction case are studied using RANS modeling. The Spalart-Allmaras model and the SST(Shear Stress Transport) model are applied and their accuracy are compared. To correlate CFD analysis with experimental data, the optimal boundary condition was investigated and the effect of a cavity around the slot is studied for the no flow case.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권9호
• /
• pp.4588-4608
• /
• 2017

The measurement of information security levels is a very important but difficult task. So far, various measurement methods have studied the development of new indices. Note, however, that researches have focused on the problem of attaining a certain level but largely neglecting research focused on the issue of how different types of possible flaws in security controls affect each other and which flaws are more critical because of these effects. Furthermore, applying the same weight across the board to these flaws has made it difficult to identify the relative importance. In this paper, the interrelationships among security flaws that occurred in the security controls of K-ISMS were analyzed, and the relative impact of each security control was measured. Additionally, a case-control study was applied using empirical data to eliminate subjective bias as a shortcoming of expert surveys and comparative studies. The security controls were divided into 2 groups depending on whether or not a security flaw occurs. The experimental results show the impact relationship and the severity among security flaws. We expect these results to be applied as good reference indices when making decisions on the removal of security flaws in an enterprise.

• Asian Pacific Journal of Cancer Prevention
• /
• 제16권18호
• /
• pp.8451-8454
• /
• 2016

Background: Gallbladder cancer (GBC) is a rare but highly invasive malignancy characterized by poor survival. In a national cancer survey, the age-standardized incidence rate of GBC was highest in Jeju Island among the 15 provinces in South Korea. The aim of this descriptive epidemiological study was to suggest the modifiable risk factors for this rare malignant disease in Jeju Island by performing an age-sex-matched case-control study. Materials and Methods: The case group included patients diagnosed with GBC at the Department of Internal Medicine of Cheju Halla General Hospital, Jeju, South Korea, within the 5-year study period. The control group consisted of age-sex-matched subjects selected from among the participants of the health promotion center at the same institute and in the same period. We compared 78 case-control pairs in terms of clinical variables such as histories of hypertension, diabetes, vascular occlusive disorders, alcohol and smoking consumption, obesity, and combined polypoid lesions of the gallbladder (PLG) or gallstone diseases (GSDs). Results: Among the relevant risk factors, alcohol consumption, parity ${\geq}2$, PLG, and GSDs were significant risk factors in the univariate analysis. PLG (p < 0.01; OR, 51.1; 95% confidence interval [CI], 2.98-875.3) and GSD (p < 0.01; OR, 54.9; 95% CI, 3.00-1001.8) were associated risk factors of GBC in the multivariate analysis with the conditional logistic regression model. However, we failed to find any correlation between obesity and GBC. We also found a negative correlation between alcohol consumption history and GBC in the multivariate analysis (p < 0.01; OR, 0.06; 95% CI, 0.01-0.31). Conclusions: These results suggest that combined PLG and GSDs are strongly associated with the GBC in Jeju Island and mild to moderate alcohol consumption may negatively correlate with GBC risk.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권18호
• /
• pp.7665-7671
• /
• 2014

Objectives: The association between body mass index (BMI) and ovarian cancer risk is unclear and requires further investigation. The present meta-analysis was conducted to assess the effect of overweight and obesity on ovarian cancer risk in the premenopausal and postmenopausal periods. Data sources: Major electronic databases were searched until February 2014 including Medline and Scopus. Reference lists and relevant conference databases were searched and the authors were contacted for additional unpublished references. Review Methods: All cohort and case-control studies addressing the effect of BMI on ovarian cancer were included, irrespective of publication date and language. The effect measure of choice was risk ratio (RR) for cohort studies and odds ratio (OR) for case-control studies. The results were reported using a random effects model with 95% confidence intervals (CIs). Results: Of 3,776 retrieved studies, 19 were ultimately analyzed including 10 cohort studies involving 29,237,219 person-years and 9 case-control studies involving 96,965 people. The results of both cohort and case-control studies showed being overweight and obesity increased the risk of ovarian cancer compared to women with normal weight during both premenopausal and postmenopausal periods: RR=1.08 (95%CI: 0.97, 1.19) and OR=1.26 (95%CI: 0.97, 1.63) for overweight and RR=1.27 (95%CI: 1.16, 1.38) and OR=1.26 (95%CI: 1.06, 1.50) for obesity. Conclusions: There is sufficient evidence that an increase in BMI can increase the risk of ovarian cancer regardless of the menopausal status, mimicking a dose-response relationship although the association is not very strong.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권21호
• /
• pp.9241-9247
• /
• 2014

Background: Rs31489 in the cleft lip and palate transmembrane1-like gene (CLPTM1L) has been identified to be associated with lung cancer through genome-wide association studies (GWAS). However, some recent replication studies yielded inconclusive results. Thus, we undertook this study to investigate the precise effect of rs31489 on lung cancer susceptibility. Materials and Methods: A hospital-based case-control study in 1,673 Chinese subjects (611 individuals with lung cancer and 1,062 controls) and a meta-analysis among 32,199 subjects (16,364 cases and 15,835 controls) were performed in this study. Results: In our case-control study, rs31489 was inversely associated with lung cancer (AC versus CC: OR=0.68, 95%CI=0.52-0.88; additive model: OR=0.68, 95%CI=0.54-0.85; dominant model: OR=0.65, 95%CI =0.51-0.84). Stratification analysis by smoking status showed a significant association and strong genetic effect in non-smokers but not in smokers. Our meta-analysis further confirmed the association, although with significant heterogeneity contributed by study design and source of controls, as shown by stratified analysis. Sensitive and cumulative analyses both indicated robust stability of our results. In addition, there was no observable publication bias in our meta-analysis. Conclusions: Overall, the findings from our replication study and meta-analysis demonstrated that CLPTM1L gene rs31489 is significantly associated with lung cancer.

• Nuclear Engineering and Technology
• /
• 제54권5호
• /
• pp.1635-1643
• /
• 2022

STPA (System-Theoretic Process Analysis) is a widely used safety analysis technique to identify UCAs (Unsafe Control Actions) resulting in potential losses. It is totally dependent on the experience and ability of analysts to construct an information model called Control Structures, upon which analysts try to identify unsafe controls between system components. This paper proposes a formal approach to support the manual identification of UCAs, effectively and systematically. It allows analysts to mechanically extract Process Model, an important element that makes up the Control Structures, from a formal requirements specification for a software controller. It then concisely constructs the contents of Context Tables, from which analysts can identify all relevant UCAs effectively, using a software fault tree analysis technique. The case study with a preliminary version of a Korean nuclear reactor protections system shows the proposed approach's effectiveness and applicability.

• 제어로봇시스템학회논문지
• /
• 제11권7호
• /
• pp.644-650
• /
• 2005

The expected positioning accuracies of civil users utilizing modernized GPS and Galileo are derived using the error analysis in this paper. Since, in general, the performance of DLL, PLL and FLL is proportional to chip lengths and wavelengths, the positioning accuracies from various measurements of modernized GPS and Galileo are derived as function of chip length and wavelength. These results are compared with that from GPS Ll measurement. In absolute positioning, compared to GPS C/A code only case, more than 17 times performance improvement is expected when all civil code signals of modernized GPS and Galileo (L1, L2, L5, E1, E5A and E5B) are used. In relative positioning, compared to GPS L1 carrier phase only case, more than 2 times performance improvement is expected when all civil signals of modernized GPS and Calileo are used. Furthermore, the relationship between GDOP and RGDOP in single frequency case is expanded to general case where multiple frequencies and both code and carrier phase measurements are used.

• 한국해양공학회지
• /
• 제24권5호
• /
• pp.48-54
• /
• 2010

The analysis of the seismic risk of an offshore structure with a control device is presented. First, a probability density function was developed to represent seismic hazard, and seismic fragility under artificial earthquake conditions was determined. Fragility curves for an offshore structure with both passive and active control devices were determined. Displacement criteria were set to evaluate the performance of the structure. Based on numerical analysis, the seismic risk to the structure was considerably reduced when the structure had a seismic control device. The seismic risk to the actively controlled structure was decreased by 80% compared to the uncontrolled case. Reasonable performance evaluations of offshore structure with control devices can be conducted through risk analysis.

• 제어로봇시스템학회논문지
• /
• 제2권1호
• /
• pp.60-66
• /
• 1996

Model Based Predictive Control(MBPC) has been widely used in predictive control since 80's. GPC[1] which is the superset of many MBPC strategies a popular method, but GPC has some weakness, such as insufficient stability analysis, non-applicability to internally unstable systems. However, CRHPC[2] proposed in 1991 overcomes the above limitations. So we chose RHPC based on CRHPC for electric furnace control. An electric furnace which has nonlinear properties and large time delay is difficult to control by linear controller because it needs nearly perfect modelling and optimal gain in case of PID. As a result, those controls are very time-consuming. In this paper, we applied RHPC with equality constraint to electric furnace. The reults of experiments also include the case of RHPC with monotonic weighting improving the transient response and including unmodelled dynamics. So, This paper proved the practical aspect of RHPC for real processes.