• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.228-234
• /
• 2021

Real estate market participants need to have a sense of predicting real estate prices in decision-making. Commonly used methodologies, such as regression analysis, ARIMA, and VAR, have limitations in predicting the value of an asset, which fluctuates due to unknown variables. Therefore, to mitigate the limitations, an artificial neural was is used to predict the price trend of apartments in Seoul, the hottest real estate market in South Korea. For artificial neural network learning, the learning model is designed with 12 variables, which are divided into macro and micro factors. The study was conducted in three ways: (Ed note: What is the difference between case 1 and 2? Is case 1 micro factors?)CASE1 with macro factors, CASE2 with macro factors, and CASE3 with the combination of both factors. As a result, CASE1 and CASE2 show 87.5% predictive accuracy during the two-year experiment, and CASE3 shows 95.8%. This study defines various factors affecting apartment prices in macro and microscopic terms. The study also proposes an artificial network technique in predicting the price trend of apartments and analyzes its effectiveness. Therefore, it is expected that the recently developed learning technique can be applied to the real estate industry, enabling more efficient decision-making by market participants.

• Journal of the Korean Institute of Gas
• /
• v.23 no.3
• /
• pp.20-26
• /
• 2019

Selective catalytic reduction(SCR) method is widely used among various methods for reducing nitrogen oxides in combustion devices of coal power plant. In the present study, the computational fluid dynamic analysis was accomplished to derive the optimal shape of ammonia-dilution air mixing device in a ammonia injection grid. The distribution characteristics of flow and $NH_3$ concentration had been elucidated for the reference shape of ammonia mixing device(Case 1). In the mixing device of Case 1, it could be seen that $NH_3$ distribution was shifted to the wall opposite to the inlet of the ammonia injection pipe. For the improvement of $NH_3$ distribution, the case(Case 2) with closing one upper injection hole and 4 side injection holes, the case(Case 3) with installing horizontal plate at the upper of ammonia injection pipe, the case(Case 4) with installing horizontal plate and horizontal arc plate at he upper of ammonia injection pipe were investigated by analyzing flow and $NH_3$ concentration distributions. From the present study, it was found that the % RMS of $NH_3$ for Case 4 was 4.92%, which was the smallest value among four cases, and the range of $R_{NH3}$ also has the optimally uniform distribution, -10.82~8.34%.

• Journal of Distribution Science
• /
• v.13 no.10
• /
• pp.65-72
• /
• 2015

Purpose - A rapidly changing business environment places great demands on small and medium-sized enterprises (SMEs). These SMEs need to find strategic alternatives for continued growth and, ultimately, survival. Thus, mergers and acquisitions (M&A) are deemed an acceptable solution. Research to date has dealt with M&A in major organizations and focused on post merger integration (PMI). Our study focuses on SMEs, as they are relatively new and unknown to the public. Therefore, this study highlights successful M&A and decision making for SMEs through a case study analysis. Research design, data, and methodology - For this study, we examined an M&A case between company S, which produces cell phone parts, and company P, which produces SSD cases. We reviewed theories and previous studies in M&A literature. We comprehensively examined the decision-making procedure at each M&A stage, describing the situation of the buying company and the selling company from the period of the M&A announcement through deal completion. In addition, we conducted interviews with both companies. The data regarding this case study were collected through interviews with managers of both companies who actively participated in the M&A process. When necessary, we asked them about additional relevant information during the interviews. Results - The result of the M&A between company S and company P was deemed acceptable with the exception of the long negotiation period. However, company S was not able to prepare for PMI after the acquisition due to a controversy over acquisition values. Moreover, the employees of the newly formed company, especially those who came from company P, complained about the M&A and attempted to leave. Thus, implications for successful M&As of SMEs are as follows: First, the procedural compliance of the M&A is needed. Second, support is needed from the CEO for the working group, rather than excessive intervention during due diligence. Third, the right, talented members of the organization should be part of the process of the M&A. Fourth, the use of various types of outside expert or business consultants is needed. Fifth, the strategic intervention by Human Resource managers is required. Last, sharing M&A information among employees is important as information dissemination will help employees be more receptive to such a change. However, this study has several limitations as a single case study; more varied SME M&A case studies are needed in order to generalize the results of the study. Conclusions - Most of the research dealing with M&As has focused on major companies and PMI and neglected SMEs. Thus, our study focuses on SMEs and the decision-making procedures for M&A. This study has significantly contributed to the literature in this area and has provided practical information around the implications of sound decision-making during M&As. Specifically, the results of the study contribute to the need for research on M&A among SMEs, which to date has often been neglected as a topic of choice.

• Journal of Environmental Science International
• /
• v.20 no.8
• /
• pp.997-1009
• /
• 2011

In order to estimate volume transport by upwelling for single artificial seamount, same shape and size of artificial seamount already deployed was applied to numerical experiment. The result showed that strong upwelling appeared at front while took place downwelling at rear. The strongest upwelling existed at the top of the artificial seamount. Volume transport by upwelling was computed as 785 m3/s. Column arrangement was applied to two artificial seamount in three cases; case 1) no clearance, case 2) sixty-five meters of clearance as half of artificial seamount's length, and case 3) hundred-thirty meters of clearance as an artificial seamount's length. All cases of column arrangements showed more upwelling volume transport than that of single seamount. Particularly, the case of no clearance calculated as 106% and appeared the most upwelling effect comparing to two other cases. Row arrangement was also applied to two artificial seamount in three cases; case 4) no clearance, case 5) forty meters of clearance as an artificial seamount's width, and case 6) eighty meters of clearance as twice of artificial seamount's width. Upwelling volume transport in case 4 increased 48% than the case of single seamount. Other two cases of 5 and 6 were estimated as 97% increased and more effective than case 4. According to the case experiments, column arrangements show more upwelling volume transport than that of row arrangements. In cases of column arrangements, with decreasing clearance between two seamount, the effect increases while showing maximum value at clearance zero. In cases of row arrangements, on the contrary, with decreasing clearance between two seamount, the effect decreases while showing minimum value at clearance zero. Since simple barotropic condition was considered for this study, further study is necessary by considering baroclinic condition to get close to reality. In conclusion, in deploying artificial seamount, optimal arrangement should be well designed to enhance primary and secondary productivity and to increase the diversity of species as well as reducing time and space.

• The Journal of Churna Manual Medicine for Spine and Nerves
• /
• v.16 no.1
• /
• pp.91-105
• /
• 2021

Objectives A case report is a detailed medical description of previously unreported observations or complications of medical conditions, unique use cases of tests, or new side effects. The purpose of this study was to evaluate the quality of case reports published in the Journal of Korea CHUNA Manual Medicine for Spine & Nerves (JKCMSN). Methods Case reports published in the JKCMSN from January 2013 to December 2020 were selected using the Oriental Medicine Advanced Searching Integrated System (OASIS). The quality of the reports was assessed based on the Consensus-based Clinical Case Reporting Guideline Development (CARE) guidelines. Results Sixty case reports that met the inclusion criteria were included in the assessment. Our analysis revealed that 71.42% of the case reports included all the necessary information and their level of reporting was good. However, their scores in the qualitative subdivisions of the reporting level parameters showed that the quality level was uneven. More than 65% of the papers did not report in the following categories: "Keywords," "Patient information," "Timeline," "Diagnostic assessment," "Therapeutic interventions," "Follow-up and outcomes," "Patient perspective," and "Informed consent." Conclusions Our analysis shows that CARE guidelines need to be followed more rigorously to improve the quality of reporting in the JKCMSN. Further efforts are necessary to develop reporting guidelines and evaluation tools relevant to the Korean clinical context.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.4 no.1
• /
• pp.81-86
• /
• 2010

This paper is case study on design, manufacture and application of customized assistive device for the ADL of person with brain lesions. The study had carried out from October 2010 to November 2010 and 2 clients from Assistive device case management demonstration project which is performed by Daegu assistive and rehabilitation center had participated. Case A, a 47-year-old man with brain lesions, stays only on the floor and could not get close to the usual toilet by himself because of the poor low extremities muscle strength and function. The moveable-toilet and customized ramp had applied to Case A. He clambers up the ramp and reach to the toilet easily. Case B, a 8-year-old boy with brain lesions, had difficulties with self-feeding because of his clumsy hand. Several existing feeding aids were applied but not appropriated. A customized feeding aid was designed and manufactured out of regard of Case A's ROM and right hand size. And his occupational therapist works together continuously to make him feed himself in the near future. Already-made assistive devices were not appropriate to Case A and B and to solve this problem, customized assistive devices were applied. The importance and needs of design and manufacture of assistive device were recognized through these case study.

• Culinary science and hospitality research
• /
• v.3
• /
• pp.385-421
• /
• 1997

This study was performed as placing stress on business plan preparation and investing economy analysis centered to cases upon presenting the premises of study for new foundation of food service business. The summarized results are as follows: 1. In the aspect of carrying out process of practical project, establishing the promotion strategy, the facility project program, the menu program, the facility and furniture program, organization & manning schedule, the business operation schedule, review of all laws & provisions and the allout promotion schedule in order were deployed. 2. Analysis of investing economy for review of profitability 1) In case of investment, excluding 600million for the real setate lease among the total investment of 1billion, it was required by 161, 235, 000 for interior project, 161, 110, 000 for facility & equipment, 19, 235, 000 for fittings, 27, 600, 000 for menu plate & uniform, 27, 600, 000 for furniture, 13, 800, 000 for sign article. 2) In case of loss & profit presumed the annual turnover is to be 1, 115, 856, 000 the contigent profit(before tax) is to be 148, 966, 000 which is 13.3% in comparson to the sales amount and the net profit(after tax) for this term s to be 104, 276, 000 which is 9.3% against the sales and the profitable ratio to the equity investment( 500 million) is 20.9% and it satisfies 20% of the premises of study. 3) In case of the payback period will be approximately two(2) years which indicated within three(3) years that is standard of new project evaluation term of ordinary enterprise. 4) In case of internal rate of return it will be 21.5% which is favorable profitability as taking into account of 15% that is standard of new project evaluation by ordinary enterprise based on general downtown money interest. That the investing value of Happy Day profitability is hinted as it is sufficient enough as the case under this study based upon such results and considered that securing supremacy is competitive power in case of commitment will be possible.

• The Journal of Information Technology
• /
• v.5 no.3
• /
• pp.97-119
• /
• 2002

It is Study Service Model for Case Study of Internet Bank. With most major full service banks having launched transactional Internet banking, attention is shifting to the realities of managing the Internet channel as a profitable component of an overall delivery strategy. In addition to examining Case Study and Internet Bank Model. Services of Internet Banking available through the Internet are as follows. 1. credit card loans, personal loans. 2. high-yield financial products. 3. insurance products. 4. securities products. 5. Case study of Foreign Internet Banking(ING, BNP, HSNC, City Bank). The study reviewed fields, including financial services, customer service, Website formation and design, convenience of use and system safety, Internet Banking Model, and many related areas. Internet Banking earned high marks in most fields. This Study review focuses on the following: Understanding and meeting consumer expectations for us ability, site performance and functionality. Integrating the Internet channel into overall marketing, product delivery and customer service strategies. Strategies to increase customer satisfaction with Internet Banking and to attract new Internet bankers. therefore this study review activity model concretion of Internet Banking Model and Case Study.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.20 no.2
• /
• pp.321-331
• /
• 2014

Purpose: The purpose of this study was to investigate the effects of case management service for hypertensive elderly patients through the customized visiting home health care program. Method: Non-equivalent control group pretest-posttest design was employed. Data were collected from April 2007 to January 2009. Among a total of fifty subjects, 25 subjects were belonged to the case management group and the others were belonged to the general management group. Results: 1) In experimental group, significant increasing rate of number of people within normal blood pressure by time, but no significant increasing rate of number of people within normal blood neutral fat, total cholesterol, HDL, & LDL. 2) In experimental group, the score of knowledge about disease and healthy life practice were increased on 8 week period but decreased on follow up period. Number of people within normal blood HDL and mean score of healthy life practice were significantly higher than control group on follow up period. Conclusion: Case management service was effective on controlling blood pressure but partly effective on blood lipid, knowledge about disease, and healthy life practice in hypertensive patients. Further study is needed to conduct a periodic re-evaluation of the effect of case management and to verify an optimal interval to provide the case management service.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.6
• /
• pp.14-20
• /
• 2015

A high-speed reduction transfer case is usually employed by an excavator, wheel loader, or bulldozer. When powerful torque is required in the case of climbing steep roads or towing heavy equipment, the high-speed reduction mode of the gearbox is used. Generally, a transfer case using a spur gear type with a speed reduction system has a speed reduction ratio of 1 to 1 or 2 to 1. However, the structure of a transfer case achieved at a high speed of 1 to 1 and a low speed of 4.5 or under 5.5 to 1 with the speed reduction by use of a planetary gear type with a speed reduction system was proposed in this study. By employing a planetary gear type with a speed reduction system, the compact structure of the transfer case was achieved, and the impact or the partial defect of gear teeth was eliminated.