• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.6
• /
• pp.825-834
• /
• 1999

Recently, various implant cylinders were supplied. especially received gold cylinders, cast cylinders produced from premade gold and plastic cylinders and plastic cylinders. This study measured and compared precise fit produced when using conventional gold and plastic cylinders. The comparative fit of lapped and non-lapped castings made from plastic pattern was examined. The implant/abutment interface fit was evaluated by scanning electron microscopy(SEM) for each of four cylinders. The following results were obtained: 1. The case of plastic cylinder showed $9.67{\pm}1.50{\mu}m$ gap when Steri-Oss fixture was connected. 2. The case of lapped casting made from plastic cylinder showed $3.01{\pm}2.81{\mu}m$ gap when Steri-Oss fixture was connected. 3 The case of gold/plastic cylinder showed $9.80{\pm}1.68{\mu}m$ gap when Steri-Oss fixture was connected. 4. The case of gold cylinder showed ${5.47{\pm}2.43\mu}m$ gap when Steri-Oss fixture was connected. 5. In case of each cylinder which was connected with Steri-Oss fixture, the size of gap was showed less in the order of the case of gold/plastic cylinder, the case of plastic cylinder, the case of gold cylinder and the case of lapped casting made from plastic cylinder As results of this study, the use of premade gold cylinder offers an advantage over plastic pat-terns in precise fit. When plastic patterns are used, polishing of implant cylinder components should provide precise fit.

• Journal of Sasang Constitutional Medicine
• /
• v.34 no.1
• /
• pp.13-27
• /
• 2022

Objectives The purpose of this study is to reevaluate the quality of reporting on case reports published in Journal of Sasang Constitutional Medicine (SCM) from June 2018 to December 2021, compared with January 2015 to May 2018. Methods Case reports were identified by searching from archive on the website of society of Journal of SCM. We assessed the quality of reporting on them based on CAse REport (CARE) guideline. Results A total of 32 case reports was finally included for the assessment. Overall quality of reporting was improved compared to one of previous study. The median reported rate of 'sufficiently' reporting increased by 7.8% from 66.7% to 74.5%, while the one as evaluated 'not sufficiently' and 'not reported' decreased by 4.1% from 14.8% to 10.7%, and 3.5% from 21.4% to 17.9%, respectively. However, more than 50% of 32 case reports did not still report 5 items about intervention adherence and tolerability(96.9%), diagnostic challenges(93.8%), adverse events(87.5%), timeline(68.8%), and patient's perspective on interventions(65.6%). Compared to the results of previous study, continuous attention is required for adverse events and changes in intervention in which the unreported rate increased by 18.3% and 6.3%, respectively. In addition, prognostic characteristics, patient's informed consent, patient's occupation, and keyword of 'Case report' and 'Sasang (Constitutional) medicine' should be sufficiently reported in the future. Conclusions Despite the overall improvement in the quality of reporting, efforts to improve the quality of reporting should be continued by referring to well-reported cases reports previously published in Journal of SCM.

• Journal of Korean Medicine for Obesity Research
• /
• v.18 no.2
• /
• pp.144-151
• /
• 2018

Objectives: The purpose of this study is to evaluate the quality of case reports of the Journal of Korean Medicine for Obesity Research by the Case Report (CARE) guidelines. Methods: Case reports published in the Journal of Korean Medicine for Obesity Research from January 2013 to July 2018 were searched from Oriental Medicine Advanced Searching Integrated System (OASIS). We assessed the quality of reporting based on CARE guidelines. Results: A total of 8 case reports were finally included for the assessment. There was a deviation in the sub-item reporting rate by a maximum 75% and a minimum 57.14% in case reports. The 10 sub-items mentioned below, such as 'Timeline', 'Diagnostic challenges', 'Diagnostic reasoning including other diagnoses considered', 'Prognostic characteristics', 'Changes in intervention', 'Important follow-up diagnostic evaluations and other test results', 'Intervention adherence and tolerability', 'Adverse and unanticipated events', 'Patient perspective' and 'Informed consent' were reported below 30%. Conclusions: Efforts to diversify the subject of the case study and to apply appropriate reporting guidelines are needed to improve the quality of the case report contributed to the Journal of Korean Medicine for Obesity Research.

• Journal of Acupuncture Research
• /
• v.38 no.2
• /
• pp.122-133
• /
• 2021

This review aimed to evaluate the quality of case reports where acupotomy was performed according to the CAse REport (CARE) guidelines and the Joanna Briggs Institute (JBI) critical appraisal checklist. Case reports on acupotomy published in Korea from 2013 to October 2020 were included in this review. A total of 28 acupotomy related case reports were selected, and a quality evaluation was verified using the CARE guidelines and JBI critical appraisal checklist. Among the case reports, spinal conditions/diseases were most commonly reported. The overall complete reporting rate for each study was relatively high (median of 63.4% according to the CARE guidelines and 73.4% according to JBI critical appraisal checklist for case reports and 62% for case series). However, low reporting rates were determined in several subcategories namely, "Intervention adherence and tolerability," "Timeline," "Diagnostic challenges," "Patient perspective," and "Adverse or unanticipated events" for case reports, and "Reporting of the presenting site/clinic," "Demographic information," "Statistical analysis," and "Clear criteria for inclusion" for case series. When reporting cases where acupotomy was performed, it is recommended that the CARE guidelines are followed to improve the quality of research. In addition, new guidelines and tools for the clinical situation of Korean medicine should be developed.

• Journal of Korean Elementary Science Education
• /
• v.28 no.3
• /
• pp.340-351
• /
• 2009

The purpose of this study was to investigate the effect of case-based learning program on three elementary students' scientific problem solving and attitudes in science class. For this study, case-based learning program was designed for bridging students' scientific knowledge and their personal experiences in real life through 4 stages: understanding the problem, planning for problem solving, conducting problem solving, and making conclusion. This study was carried out through 17 lessons of 4th grade for 6 weeks. The data was collected through close observation on three students in two groups in a class. The results include that cased-based learning program showed overall positive effects on the elementary students' scientific problem solving and attitudes in class. In particular, it turned out that the continuous emphasis of real world examples in case-based learning had powerful impacts on students' problem solving abtsity, motivation, and participation in classroom activities. The key factors to successful problem solving in school science was discussed.

• Korean Institute of Interior Design Journal
• /
• no.37
• /
• pp.80-87
• /
• 2003

Contemporary shops play an important role as a place to experience contemporary culture as well as sales and display techniques. This study is to suggest one of the prototypes of character streets consisting of characteristic shops through the analysis of the stores in the SoHo area in New York City. The study found that there are three kinds of characteristic shops preserving the cast-iron architectural environment in the SoHo area. In the first case, the interiors of the shops are partially renovated original lofts keeping decorative columns, white plaster walls and wooden floors. In the second case, the interiors are totally renovated leaving no old traces. This is achieved through wrapping columns and replacing old materials with new ones. In the third case, the interiors are renovated with the different approaches using mixed ideas and materials. The original columns exist but are transformed in this case. In the third case, shops tend to be extra large and complicated. The Prada shop in SoHo by Rem Koolaas is the best example of this case. This shop is the conceptual city, theater and avant-garde museum itself, that is, the place of experiencing contemporary culture.

• Safety and Health at Work
• /
• v.13 no.1
• /
• pp.73-77
• /
• 2022

Background: Whole-body vibration (WBV) exposure of coal mine dumper operators poses numerous health hazards. The case-control study was aimed at assessing the relative musculoskeletal health risk of dumper operators' exposure to WBV with reference to the nonexposed group. Methods: Measurements of WBV exposure were taken at the operator-seat interface using a human vibration analyzer for 110 dumper operators in three coal mines. This vibration measurement was supplemented by a questionnaire survey of 110 dumper operators exposed to WBV and an equal number of workers not exposed to WBV. The relative risk of musculoskeletal disorders (MSDs) has been assessed through the case-control study design. Results: ISO guidelines were used to compare the health risk. It was observed that the prevalence of pain in the lower back was 2.52 times more in the case group compared to the control group. The case group of Mine-2 was 2.0 times more prone to vibration hazards as compared to Mine-3. Conclusion: The case group is more vulnerable to MSDs than the control group. The on-site measurement as well as the response of the dumper operators during the questionnaire survey corroborates this finding.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.629-635
• /
• 2019

In this study, we analyzed the effect of FAN and oil cooler application on APU. MIL-STD-810 was applied to the atmospheric environment and radiation dose in order to perform thermal flow analysis. The heat flow was analyzed for the case in which the inlet / outlet fan was applied (Case 1), the case in which the inlet fan and the oil cooler were applied (Case 2), and the case in which the inlet / outlet fan and the oil cooler were applied (Case 3). As a result, it was confirmed that the cylinder head temperature of Case 3 was 21.4 times lower than that of Case 1 and 8.0 times lower than that of Case 2. Experiments were conducted under the same ambient conditions in order to examine the validity of the results. The numerical values and experimental results showed a difference of less than 7%. Through this, we were able to confirm that the APU heat flow optimization model satisfies the design conditions. The results of this study are expected to be used as basic data for optimizing heat flow of APU.

• Journal of the Korean housing association
• /
• v.20 no.5
• /
• pp.73-84
• /
• 2009

The purpose of this study was to provide basic information about the study of model development of sustainable housing area. This study identified the concept of sustainable development and the principles of the Habitat AgendaII. In the context, the 10 items of it were used to constitute the case study framework. This study found the planning characteristics through the case study of sustainable housing areas m Korea. The case for the study were 91 cases of Livable City Making of government and 43 cases of Urban Village Making of citizen group. And this study searched the missing point in the sustainable development concept of the practice cases. The research findings are as follows. First, the most practice cases had the aim of rehabilitation of the village functions. Second, in the cases of Livable City Making, residents practiced the rule as a participant for changing of their village. Third, in the cases of Urban Village Making, the scale were smaller than government's cases, but they tried the residents' health and welfare. Fourth, many cases applied the concept of sustainable development; environmental, social-cultural and economic sustainability, but some cases missed several principles of the Habitat Agenda.

• International Journal of Highway Engineering
• /
• v.16 no.4
• /
• pp.51-62
• /
• 2014

PURPOSES: This research is a basic study for application method in korea of energy harvesting technology, and it is a research to find out the direction of architectural planning through analyzing cases of interseasonal heat transfer system applied buildings. METHODS : In this paper authors investigate application necessity of energy harvesting technology, we analyzed energy use status of building section through analyzing domestic energy consumption status and analyzed domestic renewable energy generation potential. Also we study the features of energy harvesting technology, interseasonal heat transfer system, and case study on interseasonal heat transfer system applied buildings. RESULTS : On the basis of case study on interseasonal heat transfer system applied buildings, we analyzed feasibility study and classified into four sections(economic, environment, design, applicability), and suggested directions of architectural planning. CONCLUSIONS: Economic renewable energy for public and commercial buildings(hospitals, offices, schools, factories) can be provided effectively using Interseasonal Heat Transfer.