• Journal of the Korea Convergence Society
• /
• v.11 no.10
• /
• pp.225-229
• /
• 2020

In this study, the deformation and stress on each model was analyzed and the strength was compared with each other when the impacts on a total of four smart phone models was given. Models B and D with cases can be seen to have less deformation and stress than models A and C without cases. The models including the case have higher masses than the models without the case. So, the deformation and stress can be reduced by absorbing the impact force. In addition, the masses of models C and D are smaller than models A and B, but the stresses and deformations are seen to be smaller. If a case specialized for edge protection is chosen and designed when manufacturing a smart-phone in order to absorb the shock while weighing less, it is thought to improve the strength of the smart-phone and increase the durability. And it is seen that this study is adequate at the efficient design with durability of smart phone case practically and the aesthetic convergence of smart phone.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.12 no.3
• /
• pp.125-130
• /
• 1979

In this paper, the noise pressure propagated in the air on account of the engine revolution of a stern trawler, Sae-Ba-Da(G. T. 2275.71) was measured at the check points No.1 through No.43 when the vessel was cruising, towing nets, and drifting. The experiment was carried out in the period from August 23 to October 22, 1978 at the locations of lat. $33^{\circ}$ 47'N, long. $127^{\circ}$ 34'E; lat. $34^{\circ}$ 24'N, long. $128^{\circ}$ 23'E; and lat. $6^{\circ}$ 01'N, long. $108^{\circ}$ 04'E. In case of cruising, noise on the weather deck came from funnel noise. The highest noise pressure was 92dB at observation point No.9 where tile noise pressure from main engine was 105dB when the engine was operated at 730rpm and $12^{\circ}$ sorely propeller pitch. The noise measured was reduced to 90dB at observation point No.9 when the screw propeller pitch was changed to $8^{\circ}$ that resulted in reduction of engine to 103dB. In case of towing net, the main engine revolution and screw propeller pitch was fixed at 730rpm and $8^{\circ}$ respectively. But the engine noise pressure was increased up to 106dB due to the towing resistance by 14 tons of the nets, and the noise pressure was 90dB at No.9 point. A hight noise was also generated from screw because of the towing reoistance and could be measurable even in the wall of the insulated freezing room. When the vessel was drifting: the noise pressure from the generator operated, at 720rpm was 100dB. This caused 87dB noise pressure at No.9 point. The noise pressure in the boarding or residence sections was 45 to 60dB in each case of cruisinrg towing net or drifting but it was so high as 82dB on the open deck that voice could hardly be heap.

• Journal of Korean Society on Water Environment
• /
• v.27 no.1
• /
• pp.30-35
• /
• 2011

2D pollutant transport model was applied to the simulation of contaminant transport in the channel. At first, two kinds of virtual channels having different slopes were designed. The distribution of contaminant, which flows from one of the three drainages to the main channel, was simulated by each 2D model. Concentrations of 745 nodes were converted to input data of neural network model (Multi-perceptron) for training and verification using matrix. The first three cases (Case A-1, A-2, A-3) were used for training Multi-perceptron, the other three cases (Case B-1, B-2, B-3) were used for verification. As a result, Multi-perceptron reasonably divided the cases into the three characteristics which have different contaminant distributions due to the different input point of water pollution source. It can be a useful methodology for the water quality monitoring and backtracking.

• Korean Business Review
• /
• v.5
• /
• pp.241-274
• /
• 1992

General American English(=A.E.) has conservative elements as well as progressive elements. A.E. and B.E. are languages which have more similarities than differances. In this paper. I studied the process of English progress before the A.E. had come into being, and the historical background and the cahristics of A.E. coming into being. Considering the differences between A.E. and B.E. from spelling, pronunciation, vocabulary and grammar, I can give the outline as follows. A spelling 1. B.E. : au, ou $${\rightarrow}$$A.E. : a, o 2. B.E. : e $${\rightarrow}$$A.E. : i 3. B.E. : $${\ae}$$ oe $${\rightarrow}$$A.E. : e 4. B.E. : our $${\rightarrow}$$A.E. : or 5. B.E. : re $${\rightarrow}$$A.E. : er B. pronunciation 1. B.E. : [e] $${\rightarrow}$$A.E. : [i], [e], $$[\partial]$$ 2. B.E. : [a] $${\rightarrow}$$A.E. : 3. B.E. : [i(:)] $${\rightarrow}$$A.E. : [ai], $$[\partial]$$, $$[{\varepsilon}]$$ 4. B.E. : $$[{\ae}]$$ $${\rightarrow}$$A.E. : [e], [c] 5. B.E. : [ai] $${\rightarrow}$$A.E. : $$[{\ae}]$$, [e] 6. B.E. : [c] $${\rightarrow}$$A.E. : [e], [a], [o] 7. In case of "Vowel+[t]+Vowel", [t] is pronounced into [d] or [r] 8. In case of "-nt", [t] becomes a mute. 9. [t]+[j, l, m, n, r, u, or, w] $${\rightarrow}$$A.E. : [?] (=glottal stop) 10. B.E. : [w] $${\rightarrow}$$A.E. : [hw] 11. B.E. : [Voiceless consonants], [Voiced consonants] $${\leftarrow}$$A.E. : [Voiced consonants], [Voiceless consonants] C. Vocabulary The historical background and geographical conditions of those days caused lots of new compounds and neologies. D. Grammar Though we use "of" to indicate the possessive case of inanimate object, -s genitive is used in A.E. In the perfect tense, "have" is often omitted and also auxiliary verb "will" is used in any case

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.5
• /
• pp.691-699
• /
• 1997

The effects of concave hemispherical surface curvature on the local heat transfer from a turbulent round impinging jet were experimentally investigated. The liquid crystal transient method was used for these measurements. This method, which is a variation on the transient method, suddenly exposes a preheated wall to an impinging jet while video recording the response of liquid crystals for the measurement of the surface temperature. The Reynolds number ranges from Re=11,000 to 50,000, the nozzle-to- surface distance from L/d=2 to 10, and the surface curvature from D/d=6 to 12.The present results are also compared to those for the flat plate case. In the experiment, the local Nusselt numbers tend to increase in all regions with an increasing surface curvature. The maximum Nusselt number for all Reynolds numbers occurred at L/d .ident. 6 and a second maximum in the Nusselt number occurred at R/d .ident. 2 for both Re=23,000 and Re=50,000 in the case of L/d=2 and for Re=50,000 only in the case of L/d=4. Meanwhile, as the surface curvature increases, the value of the secondary maximum Nusselt number decreases. All the other cases exhibit monotonically decreasing values of the Nusselt number along the curved surface. The stagnation point Nusselt numbers are well correlated with Re, L/d, and D/d.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.632-635
• /
• 2008

In this paper, a diplexer circuit to separate GSM/CDMA band is designed using a LTCC (Low Temperature Cofired Ceramic) multi-layer technology. In order to increase a integration capability of the diplexer, it is designed in 6-layer LTCC sunstrate with a elative dielectric constant of 7.2 using 3-dimensional (3-D) multi-layer inductors and capacitors. The size of the designed diplexer including CB-CPW pads is $3,450{\times}4,000{\times}600{\mu}m^3$. An insertion loss (IL) and return loss of GSM band are less than -0.23dB and -10dB, respectively. In the case of CDMA band, the IL of -0.53dB and RL of below -10dB are archieved.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.5
• /
• pp.123-127
• /
• 2017

This paper fabricated and analyzed the image rejection mixer that uses FET's channel resistance. It can be applied for capacity 64QAM that has 50MHz~90MHz of IF band, 8.17GHz of LO frequency and 8.08~8.12GHz of RF band. When IF input power is -20dBm and LO input power is 10dBm, RF output power is obtained -33.2dBm. In this case, conversion loss is 12.9dB, the suppression of 14.3dB for LO frequency and 10.4dB for image frequency. The result of two tone test shows great IMD characteristics with 51.7dBc.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.6
• /
• pp.871-881
• /
• 2001

In this paper, the effect of soft handoff technique on CDMA cell coverage is analyzed in a lognormally shadowed channel, which uses the Hata propagation model, Also, the rate of increase for the cell coverage is analyzed by calculating the hard and soft handoff margin. When the outage probability is 0.02 and the standard deviation of the received signal is 2.5 dB in a lognormally shadowed channel, the transmit power of the mobile station which is located in the cell boundary is increased by the hard handoff margin of 5.13 dB and by the soft handoff margin of 3.68 dB, respectively. So, the rate of increase for the cell coverage is 1.39 in case of using the soft handoff technique. It is shown that if the (E$\_$b//N$\_$0/)$\_$req/ value is 7 dB, the cell coverage of the CDMA cellular system with soft handoff technique in city area is 3.33 km in case of the 850 MHz frequency and 1.36 km in case of the 1900 MHz frequency. Also, the accurate cell coverage with soft handoff technique is supported that could be serviced by the base-station in CDMA cellular system.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.52 no.1
• /
• pp.36-41
• /
• 2016

Changes in target strength (TS) values of sandfish when sandfish was alive and dead were investigated using ex-situ at 120 kHz. TS values measured by tilt angles with -50~+50 degrees showed ranges from -71.0 to -53.3 dB for live sandfish, -63.1~-46.3 dB for thawed sandfish, and -70.0~-50.4 dB after 24 hours from thawed, respectively. It was shown that while TS values were similar between the case of live and the case of after 24 hours from thawed, mean TS values were higher by approximately 5 dB in the case of immediate thawed sandfish. It was also seen that TS values were similar between the case of thawed sandfish and the case of after 21 hours from live. The results showed that TS values of live sandfish were different from those of frozen sandfish. It implies that when estimating TS of frozen fish, the influx of bubbles and changes of body should be considered.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.12B
• /
• pp.1728-1735
• /
• 2011

In this paper, satellite data link waveform is proposed which is based on the waveform of Link-16 but LDPC code is studied instead of CCSK code in order to be optimized to satellite nonlinear channel environment and transmission characteristics. And the DSM (Demux, Selective CH switch, and Mux) transponder structure is suggested which can remove all of the jamming signal out of the transmission signal band and convert uplink hopping frequency to desired ones of downlink. The results of BER and anti-jamming performance analysis shows that the required Eb/No and processing gain in the worst case partial band jammer of the proposed waveform are 2.5dB and 52dB respectively and the anti-jamming capacity improvement of DSM transponder is maximum 2dB.