• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.11
• /
• pp.57-62
• /
• 2010

The transmission case has bearing loads, The case should be designed with more stiffness and lightweight under high external loads, In this study, we performed FEA(Finite Element Analysis) for the transmission case and performed topology optimization base on the results of FEA. We performed topology optimization with the control of the shape size which is the results of topology optimization and suggested the shaped of the transmission case of topology optimization.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.54-62
• /
• 2016

The most efficient system for converting heat to electricity, AMTEC (Alkali Metal Thermal-to-Electric Convertor), is a device that directly converts heat energy to electricity using an alkali metal (sodium) as the working fluid. The AMTEC consists of a low pressure chamber, high pressure chamber, BASE (Beta-Alumina Solid Electrolyte), and artery wick. The main heat loss of the AMTEC system occurs in the low pressure chamber. A high power generation rate is thought to be obtainable by using a high temperature in the BASE. Therefore, to reduce the radiation heat loss, 6 types of radiation shields were examined to reduce the radiative heat loss in the low pressure chamber. The power generation rate of the AMTEC varied depending on the shape of the radiation shield. CFD (Computational Fluid Dynamics) analyses were carried out to optimize the shape of the radiation shield. As a result, the optimum radiation shield was found to consist of a curvature formed at the vertical point, in which case the dimensionless temperature (condenser temperature/BASE temperature) is approximately 0.665 and the maximum power generated is calculated to be 17.69W. Increasing the distance beween the BASE and condenser leads to an increase in the power generated, and the power generated with the longest distance was 17.58 W. The shields with multiple holes and multiple horizontal layers showed power reduction rates of 0.91 W and 2.06 W, respectively.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.8
• /
• pp.1240-1247
• /
• 2008

Leakage trouble on the sea water pipeline in engine room is often resulted from a localized corrosion due to severe corrosive environment caused by both high speed and high pressure of sea water flowing through the inner pipe. In addition, when the ship is in stand-by or emergency condition, underwater welding to control the leakage of sea water from a hole of its pipe is very important in an industrial safety point of view. In this study possibility of underwater welding to control leakage of sea water and corrosion property of its welding zone were investigated with the electrochemical methods by parameters of welding methods and welding electrodes when underwater welding is achieved with a such case that sea water is being leaked out with a height at 50mm from a hole of $2.5mm{\emptyset}$ of test pipe. Corrosion resistance of weld metal zone is better than the base metal and its hardness is higher than that of the base metal. However corrosion potential of weld metal zone showed a negative value than that of the base metal, therefore weld metal zone is preferentially corroded rather than the base metal by performance of galvanic cell due to difference of corrosion potential between weld metal zone and base metal. Eventually it is suggested that leakage of sea water is successfully controlled by underwater welding,

• Journal of Korean Foot and Ankle Society
• /
• v.8 no.1
• /
• pp.92-96
• /
• 2004

Purpose: To analyze the clinical and radiological results of the operative treatment in the avulsion fracture on the base of the fifth metatarsal. Materials and Methods: We studied retrospectively, 11 patients of avulsion fracture on the base of the fifth metatarsal operated and followed over 1 year, from February 2000 to May 2002. There were eight men and three women and the average age was 39 years old. The mean follow up period was 14 months. Ten cases were slip-down and one case was fall from a height injuries. We used the modified Foot Score by Wiener for the clinical evaluation, and analyzed the time of union and state of reduction radiologically. Results: In clinical results, we had ten excellent and one good cases by the modified Foot Score at last follow-up. In radiologic results, the complete bony union was achieved in all cases and the duration of the bony union was 37 days in average. Conclusion: We had good result for the avulsion fractures on the base of the fifth metatarsal treated by the operation. This study shows the operation was recommended for the moderate and severe displacement of the avulsion fractures on the base of the fifth metatarsal.

• Laser Solutions
• /
• v.16 no.3
• /
• pp.1-10
• /
• 2013

In this study, Al-Si coated boron steel(1.2 mm) were laser welded by $CO_2$ laser and hot-stamping was applied to the laser joints. Tensile properties and microstructures of the joints were investigated before and after hot-stamping. Tensile and yield strengths of the as welded specimen similar with base metal and fracture occurred base metal of boron steel. Although, in case of heat treated specimen, fracture occurred fusion zone that Al segregated zone near the bond line. These could be explained by the existence of ferrite, in the Al segregated zone near the bond line and base metal of boron steel. Before hot-stamping, hardness of base metal is lower than fusion zone and heat affected zone in spite of exist Al segregation zone($Fe_3$(Al,Si)). So fracture occurred base metal. Although, after hot-stamping, microstructure of base metal and welds zone transformed to martensite and bainite except in Al segregation zone near the bond line that $Fe_3$(Al,Si) transformed to a-ferrite. So fracture occurred Al segregation zone near the bond line.

• Journal of Veterinary Clinics
• /
• v.25 no.3
• /
• pp.187-191
• /
• 2008

A 7-year-old, intact female Yorkshire terrier dog was presented for coughing, anorexia, chest pain and dyspnea. Right lateral thoracic radiograph demonstrated a large mass shape on the heart base with decreased cardiac silhouette and severe right deviation of the trachea with the heart shifted to the left thoracic wall was observed on the ventrodorsal thoracic projection. Echocardiographic examination revealed a large rounded mass compressing left atrium around the heart base without signs of pericardial effusion. On computed tomographic (CT) findings, sagittal CT images depicted the possibility of cranial vena caval invasion and heart base involvement of the mass associated with biatrial compression. Dorsal CT image revealed the right deviation of trachea due to the heart base mass and markedly shrunk lung space was detected on the transverse CT image. Because the dog suddenly had died during the recovery from anesthesia after finishing CT scan, necropsy was performed. On gross findings, a large and lobulated mass was located at the base of the heart. A poorly-demarcated, infiltrative, multilobulated tumor composed of polyhedral cells in solid cellular sheets was confirmed based on histopathologic examination. This dog was diagnosed as a chemodectoma. This case report describes the clinical findings, diagnostic consistency of thoracic radiography, echocardiography and CT, and histopathologic confirmation in a spontaneously occurring chemodectoma with a Yorkshire terrier dog.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.14 no.1
• /
• pp.51-56
• /
• 1985

This study was to compare the effects of soy hot water extract, soy slurry, defatted soy flour, soy protein concentration and soy protein isolate on the quality of Busuge Base. In Busuge Base preparation the addition of soy products, in general, showed the improvable effect in the quality of Busuge Base. Among them the soy slurry was especially effective in volume increasing, hardness and panel score, and the soy protein isolate was effective in the protein fortification of Busuge Base. In addition, the qualify of Busuge Base was best when soy slurry and soy protein isolate were jointly used. In this case, the adequate amount of soy protein isolate was about 10%.

• Journal of architectural history
• /
• v.19 no.5
• /
• pp.81-98
• /
• 2010

In the middle of the 8th century, we met the new high-rise building, the 7th storied wooden pagodas in 'Kokubunji' in Japan. I tried to analyze and study this building to show how the wooden pagoda had changed itself because of appearance of new style. The conculusions are as follows; 1. The construction of the foundation was mainly composed namely 'Panchuk'. It was proceeded by two ways. One is the earthen-digging, laying foundations named 'Gulkwangpachuk' and the other is simply laying foundation named 'Jisangpanchuk'. In that period, due to the progress of the technique, we assumed that the main stream is 'Jisangpanchuk'. 2. The elevation of base was mostly the single foundation from archaeological study. The material was stone. The middle case of pagoda had the base of tile-roofed. We knew the just one pagoda had the base of brick, but that was not main stream. 3. The new device had appeared in the central base stone. It was the stone point. But in that period the existing method, a hole style and the new style was used in the central base stone. This fact is showed that the central government was not hold the reigon(it names 'Kook') in the respect of the technique. 4. The plan scale is classified of 3 group. As a result, the first body is larger, the main-unit and the sub-unit is a equal unit. But smaller, the length of main-unit is longer than the one of sub-unit. And the very small pagoda was build in that period.

• Journal of the Korea Computer Industry Society
• /
• v.2 no.6
• /
• pp.837-844
• /
• 2001

XML has already been settled down as a standard for the exchange of commercial data on the web. Though most institutions have a wish to use XML document as an EDI form for all sorts of document exchange, it is unfortune that previous commercial data is still saved in the relational form of data base. Therefore, it is necessary that data saved in the relational form of data base be transformed into XML document form for the better use of document exchange. In order to transform relational form of data base to XML, one solution is to publish XML document by way of mapping each field of the relational form of data base table onto XML. However, in the case of building one XML document out of more i~km two data base tables, a join should be performed since a mere mapping associated with DTD tan not solve the problem. In this paper, we build the view for the XML in which alignments generated from the join are presented. and then through this view the contents with the relational form of data base should be transformed into XML. Briefly speaking, This paper aims to propose algorithm concerned with this transformation and to realize it.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.1
• /
• pp.178-189
• /
• 1989

An experimental study has been performed to study the effect of the base slant angle of a 1/10 scale two-dimensional vehicle-like body on its wake flow including the recirculating region, where the simplified shape of the body has been originated from a profile of a domestic passenger car. In the case of a Reynolds number based on the length of the model R=7.96*10$^{5}$ , the surface pressure coefficient, the mean velocity and the turbulent stresses have been measured, while the flow visualization technique using wool tuft has been adopted as well. When the base slant angle of the model is 15.deg., the free stream flowing parallel to the slant is observed to be separated from the lower edge of the slant, thus forming the smallest recirculating region. When the base slant angles are 30.deg. and 45.deg., the free streams are separated from the upper edge of the slant and the sizes of the recirculating zones are observed to be almost the same as when the base slant angle is 0.deg. From these observations, it is conjectured that between the base slant angles of 15.deg. and 30.deg. there exists a critical angle at which the size of the recirculating region becomes minimum and as the slant angle becomes larger than this critical angle the separation line moves along the slant towards the rear edge of the roof. Through the flow visualization technique, the existence of the two counter-rotating bubbles in the recirculating region has been clearly observed and verified.