• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.61-66
• /
• 2003

In this paper, the effect of binder additive on the fracture toughness was metal matrix composite produced by squeeze casting method. In this study using the matrix is AC4CH and reinforcement used Aluminum borate whisker. Each MMC was produced by add inanimate binder ($SiO_2,\;Al2O_3,\;TiO_2$) to whiskers for increase the binding together of whiskers. Fracture toughness test were carry out in accordance with the ASTM E-399 standard test method, W=25mm, b=12.5mm CT(half size) specimen. However Base metal AC4CH was not meet the qualification of $P_m/P_Q<1.1$, so that test were performed $J_{IC}$ test. $K_{J_{IC}}$ value was measuring by $J_{IC}$ value change into $K_{IC}$. $J_{IC}$ test was carry out in accordance with the ASTM 1820.

• KIEE International Transactions on Power Engineering
• /
• v.2A no.3
• /
• pp.121-128
• /
• 2002

This study proposes a new method for transmission system expansion planning using fuzzy integer programming. It presents stepwise cost characteristics analysis which is a practical condition of an actual system. A branch and bound method which includes the network flow method and the maximum flow - minimum cut set theorem has been used in order to carry out the stepwise cost characteristics analysis. Uncertainties of the permissibility of the construction cost and the lenient reserve rate and load forecasting of expansion planning have been included and also processed using the fuzzy set theory in this study. In order to carry out the latter analysis, the solving procedure is illustrated in detail by the branch and bound method which includes the network flow method and maximum flow-minimum cut set theorem. Finally, case studies on the 21- bus test system show that the algorithm proposed is efficiently applicable to the practical expansion planning of transmission systems in the future.

• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.659-665
• /
• 2003

This paper presents a Train Communication Network simulator (TCNS) that can be used to evaluate the performance of TCN. TCN was accepted as the standard of the protocol for the communication network in trains. We carry out some simulation tests using the TCNS to show practical uses of the simulator. Results of some simulation tests are also reported. This paper presents a Train Communication Network simulator(TCNS) that can be used to evaluate the performance of TCN. TCN was accepted as the standard of the protocol for the communication network in trains. TCN of fieldbus was adopted as international standardization IEC 61375 in 1999. It has been operating on G7 train in korea. This paper developed TCNS(Train Communication Network simulator) as a simulator for performance evaluation. We can verify TCNS for preventing many kinds of occurring problems between the devices in data-communication. This study was developed TCNS as a simulator for the performance evaluation. We analyzed correlation between token, transmission data per paket and transmission speed of bus, through the TCNS, also analyzed result according to error rate of TCN. We carry out some simulation tests using the TCNS to show practical uses of the simulator. Results of some simulation tests are also reported.

• ETRI Journal
• /
• v.21 no.1
• /
• pp.55-71
• /
• 1999

Recently, the increased handling of on-line standards information has emerged as an important feature of information and communications technology (ICT) standardization. In order to meet market needs for on-time standards deployment, most standards organizations are actively seeking more efficient ways of standardization using electronic means in order to accelerate the standards making process. This paper suggests a virtual standard development environment designed for standards developers to carry out their standards-related activities on-line. In this paper, we outline a conceptual model of a concurrent standardization process and describe the design and implementation of an Extranet-based network system called standards information cooperative network (SICN). The system was created with a view to fostering faster standards development with functionalities such as a virtual management of networked standards developers, collaboration support tools, a workflow-based electronic signature system, and dynamic links for ready retrieval of standards information stored in a database. We conclude this paper with an introduction to the concept of a virtual standards development organization (VSDO) that supports all the features needed by the relevant standards making bodies to carry out their activities in a dynamic on-line environment.

• Advances in aircraft and spacecraft science
• /
• v.2 no.3
• /
• pp.345-365
• /
• 2015

This paper focuses on the design, fabrication, testing and analysis of a novel load-bearing element with energy dissipation capability. A single element comprises two von-Mises trusses (VMTs), which are sandwiched between two plates and connected to dashpots that stroke as the VMTs cycle between stable equilibrium states. The elements can be assembled in-plane to form a large plate-like structure or stacked with different properties in each layer for improved load-adaptability. Also introduced in the elements are pre-loaded springs (PLSs) that provide high initial stiffness and allow the element to carry a static load even when the VMTs cannot under harmonic disturbance input. Simulations of the system behavior using the Simscape environment show good overall correlation with test data. Good energy dissipation capability is observed over a frequency range from 0.1 Hz to 2 Hz. The test and simulation results show that a two layer prototype, having one soft VMT layer and one stiff VMT layer, can provide good energy dissipation over a decade of variation in harmonic load amplitude, while retaining the ability to carry static load due to the PLSs. The paper discusses how system design parameter changes affect the static load capability and the hysteresis behavior.

• The Journal of Korean Medical History
• /
• v.36 no.1
• /
• pp.51-72
• /
• 2023

IM Won-jun(任元濬, 1423~1500) was an Confucianism Doctor in the former period of Joseon Dynasty. Through IM Won-jun's historical trace we could know the range of Uiseoseubdoggwan(Medical Learning Officer)'s duty not limited to study medical books at that time but extended to medical treat, educate, recommend medical policy, personnel manage, carry out administrative work, carry out all the works concerned with medical books, make new medicines at different official period. Among these after learning duties the Royal Family of the Joseon Dynasty awarded high grades to medical treatment for king and king's mother, but from the viewpoint of advancement of medicine controling the top of medical policy as a chief of Jeonuigam had important meaning. The system of Uiseoseubdoggwan(Medical Learning Officer) in the Joseon Dynasty played the role of cultivating widely the man of ability who leaded medical development by sharing the man of ability between medicine and confucianism which was dominant learning at that time, so the knowledge and professional skill of medicine, Yin-Yang and the Five Elements theory, the spirit of relief of the world were spreaded across to national administration, education, publication culture, putting philosophy of filial piety into practice in the Joseon Dynasty.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.6
• /
• pp.2817-2834
• /
• 2016

The existing reversible data hiding methods for block truncation coding (BTC) compressed images often utilize difference expansion or histogram shifting technique for data embedment. Although these methods effectively embed data into the compressed codes, the embedding operations may swap the numerical order of the higher and lower quantization levels. Since the numerical order of these two quantization levels can be exploited to carry additional data without destroying the quality of decoded image, the existing methods cannot take the advantages of this property to embed data more efficiently. In this paper, we embed data by shifting the higher and lower quantization levels in opposite direction. Because the embedment does not change numerical order of quantization levels, we exploit this property to carry additional data without further reducing the image quality. The proposed method performs no-distortion embedding if the payload is small, and performs reversible data embedding for large payload. The experimental results show that the proposed method offers better embedding performance over prior works in terms of payload and image quality.

• Journal of Korean Ophthalmic Optics Society
• /
• v.15 no.1
• /
• pp.31-38
• /
• 2010

Purpose: In this paper, we have dealt with problems and the improvement proposals of FTC (FAIR TRADE COMMISSION) report which insist on relaxed entry regulation for an optical shop. Methods: We analyzed each content of the FTC (FAIR TRADE COMMISSION) report which argue relaxed entry regulation for an optical shop. Results: At present, the supply of optician and optical shop are already saturated, the overseas cases cited would not be in accord with our reality. The reform of policy must take precedence in order to carry out the policy. A delicate balancing act is needed in order to satisfy both the government's and optician's needs. Conclusions: At this point, it is premature to carry out the relaxed entry regulation, this policy should be looked from a long-term point of view.

• KIPS Transactions on Computer and Communication Systems
• /
• v.3 no.1
• /
• pp.15-22
• /
• 2014

Delay-Tolerant Network employs message forwarding based on a Store, Carry and Forward method to conquer no guarantee of continue connectivity. For this reason, a lot of DTN routing scheme have been proposed recently. message forwarding is an important research issue in delay-tolerant network and In this paper, we propose a efficiency DTN routing scheme using node's social relation and expanded Ego-network betweenness centrality. Our simulation results show that it is more efficient to message delivery cost than Epidemic routing, Friendship routing while it has a little performance degradation of message delivery ratio.

• The Korean Journal of Community Living Science
• /
• v.26 no.1
• /
• pp.75-85
• /
• 2015

This study investigates the impact of livestock diseases, including FMD(foot-and-mouth disease) and MCD(mad-cow disease), on pork demand in Korea. TV news stories about the livestock diseases were considered as negative advertising, and therefore the carry-over effect of negative advertising was combined with the pork demand model in conjunction with an exponential distributed lag function. The asymmetry hypothesis was imposed, however it was accepted that demand response does not show different sensitivities to increases and decreases in the livestock disease news. FMD news had a negative effect on pork demand, whereas MCD news had a positive effect, yet FMD news had a greater effect on pork demand than MCD news. The pork demand elasticity estimates for FMD and MCD news were -0.0071 and 0.0028, respectively. The cross-elasticity of the imported beef price to pork demand was highly inelastic, but it was elastic during the beef import embargo.