• 한국진공학회지
• /
• 제8권3A호
• /
• pp.207-212
• /
• 1999

Undoped InP epilayers with high purity were grown by using $In/PCl_3/H_2$ chloride vapor phase epitaxy. It was found that the growth of InP homoepitaxial layer is optimized at the growth temperature of $630^{\circ}C$ and at the $PCl_3$ molar fraction of $1.2\times10^{-2}$. The carrier concentration of InP epilayer was less than $10^{14} {cm}^{-3}$ from the low temperature (11K) photoluminescence measurement. Growth behavior of undoped InP current blocking layer on reactive ion-etched (RIE) mesas has been investigated for the realization of 1.55 $\mu \textrm m$buried-heterostructure laser diode (BH LD), using chloride vapor phase epitaxy. On the base of InP homoepitaxy, InP current blocking layers were grown at the growth temperatures ranging from $620^{\circ}C$ to $640^{\circ}C$. Almost planar grown surfaces without edge overgrowth were achieved as the growth temperature increased. It implied that higher temperature enhanced the surface diffusion of the growth species on the {111} B planes and suppressed edge overgrowth.

• Journal of Electrical Engineering and Technology
• /
• 제7권5호
• /
• pp.797-806
• /
• 2012

Fault detection and isolation (FDI) algorithms provide fault monitoring methods in GPS measurement to isolate abnormal signals from the GPS satellites or the acquired signal in receiver. In order to monitor the occurred faults, FDI generates test statistics and decides the case that is beyond a designed threshold as a fault. For such problem of fault detection and isolation, this paper presents and evaluates position domain integrity monitoring methods by formulating various pseudorange prediction methods and investigating the resulting test statistics. In particular, precise measurements like carrier phase and Doppler rate are employed under the assumption of fault free carrier signal. The presented position domain algorithm contains the following process; first a common pseudorange prediction formula is defined with the proposed variations in pseudorange differential update. Next, a threshold computation is proposed with the test statistics distribution considering the elevation angle. Then, by examining the test statistics, fault detection and isolation is done for each satellite channel. To verify the performance, simulations using the presented fault detection methods are done for an ideal and real fault case, respectively.

• 한국재료학회지
• /
• 제16권5호
• /
• pp.292-296
• /
• 2006

Effects of rapid thermal annealing of bismuth telluride thin films on their thermoelectric properties were investigated. Films with four different compositions were elaborated by co-sputtering of Bi and Te targets. Rapid thermal treatments in range of $300{\sim}400^{\circ}C$ were carried out during 10 minutes under the reducing atmosphere (Ar with 10% $H_2$). As the temperature of thermal treatment increased, carrier concentrations of films decreased while their mobilities increased. These changes were clearly observed for the films close to the stoichiometric composition. Rapid thermal treatment was found to be effective in improving the thermoelectric properties of $Bi_2Te_3$ films. Recrystallization of $Bi_2Te_3$ phase has caused the enhancement of thermoelectric properties, along with the decrease of the carrier concentration. Maximum values of Seebeck coefficient and power factor were obtained for the films treated at $400^{\circ}C$ (about $-128{\mu}V/K$ and $9{\times}10^{-4}\;W/K^2m$, respectively). With further higher temperature ($500^{\circ}C$), thermoelectric properties deteriorated due to the evaporation of Te element and subsequent disruption of film's structure.

• 한국항공우주학회지
• /
• 제39권3호
• /
• pp.225-231
• /
• 2011

GPS 위성 이상 신호의 발생 요인 중 위성 시계의 이상 현상은 GPS 측정치에 매우 큰 영향을 미칠 수 있으나, 측정치에는 궤도 오차, 이온층 지연 오차, 대류층 지연 오차, 다중경로 오차, 수신기 시계 오차 등의 성분들이 포함되어 있어 위성 시계의 오차 범위가 다른 요소에 의한 오차보다 커지기 전에는 위성 시계의 이상 현상을 검출하기 어려운 문제가 있다. 위성 시계에 이상 현상이 발생하였을 때 이상 판별의 임계 범위를 최소화 하여 빠르고 정확하게 검출을 수행할 수 있도록, 본 논문에서는 이중 주파수 측정치로부터 반송파 스무딩 필터를 적용하고 수신기 시계 오차 및 다른 여러 가지 요인에 의한 오차를 보정한 후 정확한 위성 시계 오차를 추정하는 방법을 제시하였고 IGS 기관에서 제공하고 있는 위성 시계 정보와 비교를 통해 제시한 방법의 성능을 확인하였다.

• Journal of Positioning, Navigation, and Timing
• /
• 제10권1호
• /
• pp.13-20
• /
• 2021

A series of numerical experiments with measurements observed at continuously operating reference stations (CORS) of the international GNSS services (IGS) and the national geographical information institute of Korea (NGII) have been intensively carried out to evaluate the quality of pseudo-ranges and carrier-phases of GPS L2C signal obtained by various receiver types, benign and harsh operational environment. In this analysis, some quality measures, such as signal-to-noise ratio (SNR), the magnitude of multipath, and the number of cycle slips, the pseudo-range and carrier phase obtaining rate were computed and compared. The SNR analysis revealed an impressive result that the trend in the SNR of C/A and the L2C comparably depends upon type of receivers. The result of multipath analysis also showed clearly different tendency depending on the receiver types. The reason for this inconsistent tendency was seemed to be that the different multipath mitigation algorithm built-in each receiver. The number of L2C cycle slip was less than P2(Y), and L2C measurements obtaining rate was higher than that of P2(Y) in three receiver types. In the harsh observational environment, L2C quality was not only superior to P2(Y) in all aspects such as SNR, multipath magnitude, the number of cycle slips, and measurement obtaining rate, but also it could maintain a level of quality equivalent to C/A. According to the results of this analysis, it's expected that improved positioning performance like accuracy and continuity can be got through the use of L2C instead of existing P2(Y).

• 한국항공우주학회지
• /
• 제40권12호
• /
• pp.1032-1039
• /
• 2012

이 논문에서는 GPS L1/L2 이중 주파수 반송파 위상 관측값을 사용하여 100km 이상의 장기선을 가지는 저궤도 편대비행위성의 상대위치결정 기법을 연구하였다. 더욱 다양한 응용분야로의 유연한 확장을 위해 위성의 동역학 모델을 고려하지 않았고 이중 주파수 GPS 관측값과 오차 모델링을 기반으로 확장칼만필터를 통해 구하고자 하는 미지의 변수를 추정하였다. 편대비행위성 간 기선의 증가로 인해 공통오차로 소거되지 않고 남아있는 전리층 지연 오차는 전리층 매핑 모델을 사용하여 계산하였다. 정수형 미지정수 검색은 정수 최소 자승 조건을 만족하는 미지정수를 보다 빠르고 효율적으로 검색할 수 있는 MLAMBDA 기법을 적용하였다. 결정된 정수형 미지정수의 검정은 비율 테스트를 통해 판정하였다. 제안된 기법의 검증을 위해 편대비행위성 간 상대 기선 거리가 100 km 이상 떨어져 있는 가상의 편대비행위성 시나리오를 구성하여 상대위치결정 정확도를 분석하였다. 분석된 결과를 통해 제안된 기법은 장기선에서의 반송파 위상 미지정수 결정과 mm 수준의 정밀한 상대위치결정이 가능함을 확인하였다.

• 한국산학기술학회논문지
• /
• 제10권9호
• /
• pp.2369-2378
• /
• 2009

본 논문에서는 GSM (Global System for Mobile Communication) 단말의 성능을 측정하기 위한 측정기의 기능을 소프트웨어로 구현하고 GSM 신호 발생기를 통해 발생된 신호를 이용해 구현된 소프트웨어 측정기의 성능을 평가해본다. 일반적으로 통신신호 측정기는 매우 정밀한 정확도를 필요로 하므로 정확도가 충분히 높지 않은 일반 통신 모뎀 수준의 수신 알고리듬을 직접적으로 측정기에 적용할 수는 없다. 본 논문에서는 GSM 신호의 정밀한 측정을 위한 새로운 GSM 신호의 수신 알고리듬을 제안한다. 제안된 GSM 수신 알고리듬에는 2단계(개략적 단계, 미세 단계)의 파라미터(심볼 타이밍, 주파수 오프셋, 반송파 위상) 추정방식을 사용하였다. 또한 수신신호의 보간을 이용하여 수신 신호 샘플의 개수를 증가시킴으로서 측정의 정확도를 향상시켰다. 본 논문에서 제안된 GSM 신호 측정 방식은 하드웨어를 구현하기 전에 소프트웨어를 이용하여 사전에 측정 성능을 검증하는데 사용될 수 있다. 또한 구현된 소프트웨어 알고리듬을 속도측면에서 최적화함으로서 직접 GSM 신호 측정을 위한 상용 시스템으로도 이용할 수 있다.

• 한국항공운항학회지
• /
• 제20권4호
• /
• pp.39-44
• /
• 2012

This paper propose a transmission method for "Transportation system" that can decide precise position under wide area road traffic environment. For precise position detecting, central station collect multiple receiver station's satellite navigation data and generate correction information. In this process, we need efficient real time transmission method for satellite navigation message that has variable data size. We propose real time data transmission method. This real time transmission method offer efficient processing structure for multiple receiver station's satellite navigation message. This paper explains proposed real time transmission method and proofs this transmission method.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.498-500
• /
• 2004

QPSK (Quaternary Phase Shift Keying) will be adopted as the modulation of HRIT (High Rate Information Transmission) which is transmitted to COMS (Communication, Ocean and Meteorological Satellite) through HPA (High Power Amplifier) in ground segment. Due to the nonlinearity of HPA, IMD (Inter-Modulation Distortion) of multi-carrier signals and PAPR (Peak-to-Average Power Ratio) of modulated HRIT must be considered to estimate the output power of HPA. In this paper, we measured the PAPR to various the roll-off factor of RRC (Root Raised Cosine filter) which is filtering the modulated HRIT signal for reducing ISI (Inter-Symbol Interference) and bandwidth. It was found that the minimum PAPR is 2.78dB at 0.5 of roll-off factor for scrambled data. It's 2.78dB of P APR will be in output power selecting in COMS earth station.

• 대한전자공학회논문지
• /
• 제27권5호
• /
• pp.737-746
• /
• 1990

Ga0.47In0.53As PIN photodiodes(PD) having various areas have been fabricated by liquid phase epitaxial techniques. Ternary melt has been baked out at 675\ulcorner in H2 atmosphere for 20 hours before growth, which resulted in reduction of background carrier concentration of grown epi-layer. Also, lattice mismatch has been controlled within 0.01%. The room temperature performance of 10**-4cm\ulcornerarea PIN PD at a bias voltage of -5V were` quantum efficiency(with no antireflection coating)=60% for 1.3\ulcorner light source, dark current\ulcorner5nA, and capacitance\ulcornerpE. Frequency response measurement of packaged PIN PD has shown that cut-off frequency (f-3dB) was 961MHz. This PD has shown a good eye pattern when it was incorporated in a 565Mbps optical receiver.