• Korean Journal of Agricultural Science
• /
• v.39 no.2
• /
• pp.189-194
• /
• 2012

It is well-known fact that woodworking activity could contribute in enhancing creativity, scientific problem-solving ability, spatial perception ability and prosocial behavior of children. However, there is little chance that children experience woodworking at home or in kindergarten. This study was conducted to know how much children and adults have done woodworking in there daily life and how they perceived children's woodworking activity. Woodworking activities for children (N=207, 5 and 6 year old kids) with adults (N=271, only fathers) were carried out in 10 kindergartens of Cheongju. Actually, the survey result shows that very few children and adults experienced woodworking in their daily life. 62.8% of children and 34.3% of adults surveyed responded that they had never done woodworking. However, the greater part of children and adults evaluated the woodworking activity positively. Over 95% of children surveyed responded that their woodworking activity was fun and they want to play woodworking again. Over 73% of adults surveyed responded that children's woodworking activity was safe, and over 99% of adults surveyed responded that they can recommend children's woodworking activity to others. In conclusion, the development of safe tools and programs for children's woodworking activity helps its spread and activation.

• Journal of Korean Society for Atmospheric Environment
• /
• v.12 no.4
• /
• pp.459-472
• /
• 1996

An experimental investigation on the wind flow over smooth bell-shaped two-dimensional hills with hill slopes (the ratio of height to half width) of 0.3 and 0.5 is performed in an atmospheric boundary-layer wind tunnel. Two categories of the models are used in the present investigation; six two-dimensional single-hills, and four continuous double-hills. The measurements of the flow field and surface static-pressure distribution are carried out over the Reynolds number (based on the hill height) of 1.9 $\times 10^4, 3.3 \times 10^4, and 5.6 \times 10^4$. The velocity profiles and turbulence characteristics are measured by the pitot-tube and X-type hot-wire anemometer, respectively. The undisturbed boundary-layer profile on the bottom surface of the wind tunnel is reasonably consistent with the power-law profile with $\alpha = 7.0 (1/\alpha$ is the power-law exponent) and shows good spanwise uniformities. The profiles of turbulent intensity are found to be consistent along the centerline of the wind tunnel. The measured non-dimensional speed-up profiles at the hill crest show good agreements with the predictions of Jackson and Hunt's linear theory. The flow separation occurs in the hill slope of 0.5, and the oil-ink dot method is used to find the reattachment points in the leeside of the hill. The measured reattachment points are compared with the numerical predictions. Comparisons of the mean velocity profiles and surface pressure distributions between the numerical predictions and the experimental results show good agreements.

• IE interfaces
• /
• v.22 no.4
• /
• pp.312-316
• /
• 2009

A questionnaire survey was carried out in order to understand the discomfort when people experience in reading Korean characters of displays. In the survey, 499 respondents (276 males and 223 females), whose ages ranged from 10s to 70s, participated, while 19.6% of the respondents were over 60 years old. The mean visual acuity was 0.93, while it decreased as the age increases from 40s. Approximately 41.4% of the respondents, 98% of them were over 40s, reported that they experienced presbyopia. It was found that the percentage of the respondents who experienced the discomfort much in reading Korean characters significantly increased as the age increases from 40s. The respondents over 40s reported different discomfort experiences according to the type of displays. It was found that the respondents thought that the main reason for the discomfort in reading is related to the character size. The survey results showed that the Korean text in the displays should be designed to be easily readable by the main users.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.8
• /
• pp.2399-2402
• /
• 2013

The catalytic pyrolysis of cellulose was carried out over SAPO-11 for the first time. Pyrolyzer-gas chromatography/mass spectroscopy was used for the in-situ analysis of the pyrolysis products. The acid sites of SAPO-11 converted most levoglucosan produced from the non-catalytic pyrolysis of cellulose to furans. In particular, the selectivity toward light furans, such as furfural, furan and 2-methyl furan, was high. When the catalyst/cellulose ratio was increased from 1/1 to 3/1 and 5/1, the increase in the quantity of acid sites led to the promotion of deoxygenation and the resultant increase of the contents of light furan compounds. Because furans can be used as basic feedstock materials, the augmentation of the economical value of bio-oil through the catalytic upgrading over SAPO-11 is considerable.

• Journal of Environmental Science International
• /
• v.21 no.3
• /
• pp.339-349
• /
• 2012

In order to clarify the impact of emissions reductions on the air quality over Metropolitan area of Korean Peninsula, several numerical experiment and analysis of integrated process rate(IPR) of ozone were carried out. Numerical models used in this study are WRF for the estimate the meteorological elements and CMAQ for assessment of ozone concentration. As result in the sensitive test of VOC/NOx reduction experiments, although VOC reduction tends to induce the different impact on the advection and photochemical reaction rate of ozone in urban area and rural area, the mechanism of ozone appeared to be more sensitive to the reduction of VOC than that of NOx over the metropolitan and its surround area. So the control of VOC emission inventories is an effective means to decrease the ozone concentrations around this area.

• Journal of Embryo Transfer
• /
• v.12 no.1
• /
• pp.49-56
• /
• 1997

This study was carried out to establish an effective and practical system for commercialization of embryo production techniques by analyzing several factors influencing in vivo embryo production on condition of donors treated FSH-P and SUPER-OV in Korean native cattle. In vivo embryos were flushed 226 times from 128 donors. The results obtained for the factors influencing in vivo embryo production by conditionof donors treated FSH-P and SUPER-OV were as follows :1. Age and parity of donors did not affect the transferable and freezable embryos among the treatments in FSH-P but the transferable and freezable embryos were decreased after 6 years old and 4th parity in SUPER-OV(P<0.01). 2. The production of embryos on the weight of donors was higher in over 400kg of body weight in FSH-P(P<0.01) and was higher in over 450kg than 400~450kg of body weight in SUPER-OV(P<0.05). For FSH-P embryo production was better responded in 350~450kg of body weight with 30~32mg doses, and showed a better result in over 450kg body weight with 32~34mg doses.(Key Words : in vivo embryo, donors, FSH-P SUPER-OV)

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.10
• /
• pp.801-807
• /
• 2009

In this paper, we propose a novel shoot-through protection circuit and pulse generator for half-bridge driver IC. We designed a robust half-bridge driver IC over a variation of processes and power supplies. The proposed circuit is composed a delay circuit using a beta-multiplier reference. The proposed circuit has a lower variation rate of dead time and pulse-width over variation of processes and supply voltages than the conventional circuit. Especially, the proposed circuit has more excellent pulse-width matching of set and reset signals than the conventional circuit. Also, the proposed pulse generator is prevented from fault operations using a logic gate. Dead time and pulse-width of the proposed circuit are typical 250 ns, respectively. The variation ratio is 68%(170 ns) of maximum over variation of processes and supply voltages. The proposed circuit is designed using $1\;{\mu}m$ 650 V BCD (Bipolar, CMOS, DMOS) process parameter, and the simulations are carried out using Spectre simulator of Cadence corporation.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.5
• /
• pp.991-998
• /
• 1989

This investigation was carried out for the purpose of studying the turbulent flow and mixing characteristics after collision of two jets depending upon the cross angle variations. For effectuating this experimental study, a subsonic wind tunnel and a constant temperature type two channel hot-wire anemometer system have been utilized. The jets issuing from two nozzles have same Reynolds numbers and their cross angle was variable. After collision of two jets, the cross section of the mixing flow, mean and fluctuating velocities and Reynolds stresses have been measured, and analyzed comparing them with semi-empirical equations. It was found that the nondirectional contour of the cross section agreed well with an elliptic formula and the mean velocities along the centerline had a good similarity independent of cross angle variations. The distributions of U over bar-components measured in the Y direction have a good similarity and agree well with semi-empirical equations of Hinze and Gortler. The Reynolds stresses of u'v' over bar on the Y axis show a similar distributions and their agreement with the theoretical curve is remarkable but those of u'w' over bar measured along the Z axis are randomly scattered.

• Ecology and Resilient Infrastructure
• /
• v.6 no.3
• /
• pp.137-144
• /
• 2019

This study carried out experimental investigation through measurements of void fraction of aerated flows generated near hydraulic structures. The imaging technique applying the shadowgraphy method was employed to quantify aeration by measuring void fractions. Aerated flows in the vicinity of a sloped weir and a stepped weir were measured using the imaging technique. Spatially distributed void fraction that was possible from gray images gives aeration rate of the flows over hydraulic structures with eco-environmental function. Aeration over the stepped weir takes place more strongly and widely in its front slope and downstream compared to the sloped weir.

• International Journal of Computer Science & Network Security
• /
• v.22 no.4
• /
• pp.203-208
• /
• 2022

The occurrence of Type 2 Diabetes Mellitus (T2DM) is hoarding globally. All kinds of Diabetes Mellitus is controlled to disrupt over 415 million grownups worldwide. It was the seventh prime cause of demise widespread with a measured 1.6 million deaths right prompted by diabetes during 2016. Over 90% of diabetes cases are T2DM, with the utmost persons having at smallest one other chronic condition in UK. In valuation of contemporary applications of Big Data (BD) to Diabetes Medicare by sighted its upcoming abilities, it is compulsory to transmit out a bottomless revision over foremost theoretical literatures. The long-term growth in medicine and, in explicit, in the field of "Diabetology", is powerfully encroached to a sequence of differences and inventions. The medical and healthcare data from varied bases like analysis and treatment tactics which assistances healthcare workers to guess the actual perceptions about the development of Diabetes Medicare measures accessible by them. Apache Spark extracts "Resilient Distributed Dataset (RDD)", a vital data structure distributed finished a cluster on machines. Machine Learning (ML) deals a note-worthy method for building elegant and automatic algorithms. ML library involving of communal ML algorithms like Support Vector Classification and Random Forest are investigated in this projected work by using Jupiter Notebook - Python code, where significant quantity of result (Accuracy) is carried out by the models.