• 공업화학
• /
• 제2권3호
• /
• pp.238-245
• /
• 1991

메탄의 염소화 반응을 여러 Pt/NaY 제올라이트 촉매상에서 수행하였고, 백금입자의 분산도 및 위치에 따른 반응의 특성변화를 관찰하였다. 큰 백금입자가 제올라이트의 외부표면에 주로 존재하는 촉매에서는 4가지의 염화메탄이 모두 생성된 반면, 고도로 분산된 백금입자가 제올라이트내에 존재하는 촉매의 경우 유일하게 메틸염화물만이 생성되었다. 이는 고도로 분산된 백금입자의 역할뿐 아니라 한정된 공간을 지니는 담체내의 supercage에 의해 메틸염화물의 계속되는 염소화반응이 제한되었기 때문으로 생각된다.

• 한국자동차공학회논문집
• /
• 제10권1호
• /
• pp.234-243
• /
• 2002

When a vehicle is operated over sort terrain, torque(or soil thrust) applied to driving wheel brings about shear displacement far soil due to compression and shear failure of soil under tire. This shear displacement give rise to slip and a additional sinkage due to slip. This additional sinkage is usually referred to as slip-sinkage. The slip-sinkage is affected by soil conditions and inflation pressure of tire. This slip-sinkage influence tractive performance on driving wheel . We conducted the experimental study far investigating the effect of slip on sinkage and tractive performance of driving wheel, such as motion resistance, thrust and drawbar pull. The experiment was carried out over three different soil conditions(soft, hard and very hard soil) far a tire with three levels of inflation pressure(120kPa, 240kPa and 360kPa). The results of this study show qualitatively slipsinkage characteristics and slip-tractive performance relationships of driving wheel with soil conditions and inflation pressure of tire.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.223-226
• /
• 2005

For $CO_2-free$ hydrogen production and better utilization of the produced carbon, catalytic decomposition of methane over rubber-grade carbon blacks manufactured from coal tar was carried out. The catalytic activities of several domestic carbon blacks were compared. A pelletized carbon black exhibited considerably lower activity and activation energy than the fluffy( loose) carbon black of the same grade. This difference is considered due to the binder that was added during pelletization. For pelletized carbon blacks, a tendency was observed that the activity per unit mass of catalyst increased with the specific surface area of the carbon black. Another tendency was also observed that the activation energy increased with the primary particle size or decrease of the specific surface area.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.576-579
• /
• 2008

The purpose of study is a development of the high reliance electric driven water-pump that fuction is forcing the movement of water using basic design, proto sample and test at the cooling system. It was important to supply a coolant quickly and accurately for the requirement of flow rate at the system when we carried out the designs for BLDC Moter, Controller and water pump(Impeller, Volute Casing, Sealing Device) First, we attained ours purpose that the target efficiency for water pump was over 40% and then we are doing the optimum design for Brushless Motor and Controller that its target is over 55% of efficiency.

• Archives of Plastic Surgery
• /
• 제37권3호
• /
• pp.285-288
• /
• 2010

Purpose: Dermatofibrosarcoma protuberans is a rare tumor, accounting for 0.1% of all malignant tumors. Although metastasis is very uncommon, local recurrence occur frequently. Dermatofibrosarcoma protuberans occurring in children is even more rare; this is the first case report of congenital dermatofibrosarcoma protuberans in Korea. Methods: The patient is a 14-month-old male infant with a lesion that was first thought to be a birthmark. The lesion grew larger, and a punch biopsy revealed dermatofibrosarcoma protuberans. A wide local excision was performed with a 2 cm peripheral resection margin beyond the gross tumor lesion. Deep fascia and a portion of muscle underneath the central part of the lesion were also taken. The surgical defect was covered by a split-thickness skin graft. Results: There has been no clinical sign of recurrence over one year after the surgery. Conclusion: A patient with congenital dermatofibrosarcoma protuberans detected at an early stage underwent a wide local excision of the tumor after accurate diagnosis was carried out by biopsy and immunohistochemical studies. There was no clinical evidence of tumor recurrence during over a 1-year follow-up.

• 한국식품조리과학회지
• /
• 제9권4호
• /
• pp.308-311
• /
• 1993

This study was carried out in order to study the effect of mungbean protein on quality characteristics of angel parfait. The foaming properties of mungbean protein was tested and angel parfait was made with mungbean protein. The results were as follows: 1. Foam expansion values of mungbean protein were generally dependent on protein concentration to 3かio protein suspension. From 1％ to 3％ suspen-sion, foam expansion values increased. However, over 3％ suspension, the values decreased. 2. The foaming stability appeared the greatest value as protein concentration increased. But it was not signifi-cantly different over than 5% concentration. 3. The overrun of angel parfait made with munbean protein was significantly higher than that of made with soybean protein and sensory evaluation data presented that angel parfait made with mungbean protein was significantly higher than that of soybean protein.

• 한국유체기계학회 논문집
• /
• 제8권3호
• /
• pp.7-15
• /
• 2005

A Navier-Stokes code has been developed to simulate the flow through a cross flow fan. It is based on an unstructured finite volume method and uses moving grid technique to model the rotation of the fan. A low Reynolds number turbulence model is used to calculate eddy viscosity. The basic algorithm is SIMPLE. Numerical simulations over a wide range of flow rate aye carried out to validate the code. Comparison of all numerical solutions with experimental data confirms the validity of the present code. Present numerical solutions show a noticeable improvement over a previous numerical method which is based on a model of body force to simulate the rotation of the impeller.

• 전기학회논문지
• /
• 제58권7호
• /
• pp.1398-1404
• /
• 2009

This paper proposes a vehicle speed detector with anisotropic magnetoresistive (AMR) sensors and addresses experimental results to show the performance of the detector. The detector consists of two AMR sensors and mechanical and electronic apparatuses. The AMR sensor senses disturbance of the earth magnetic field caused by a vehicle moving over the sensor and then produces an output indicative of the moving vehicle. In this paper, vehicle speeds are calculated by using two AMR sensors built on a board. The speed of a vehicle is calculated by dividing the known distance between the two sensors with the time difference between two output signals from each sensor, captured sequentially while the vehicle is driving over the sensors. Some field tests have been carried to show the performance of the proposed detector and its usefulness.

• 한국포장학회지
• /
• 제7권2호
• /
• pp.31-38
• /
• 2001

This study was carried out to investigate development method of packaging exhibition in korea. Even if Seoul Pack is held by 8th times, it marks time in comparison with other famous packaging exhibitions(e.g. Inter Pack, Pack Expo and Tokyo Pack). They have been developed every year. Seoul Pack is small scare, there is no comparison between ours and other famous packaging exhibitions. Seoul Pack is 1/10 over Tokyo Pack in the exhibition scale and visitors. Seoul Pack needs an active public information to develop national scale. After exhibition we distributer 70% of earnings and reinvest 30% of promotion. We needs over 400 exhibitors, 1,500 booths and 100,000 visitors in other to advance national exhibition in the near future.

• 한국생산제조학회지
• /
• 제9권1호
• /
• pp.111-118
• /
• 2000

Over tightening experiments of the tension-controlled bolts are carried out and the stripping mechanism is reviewed base on the observed results. There are two modes of bolt failure due to the over tightening : one the fracture of the bolt the other the thread stripping Bifurcation between these two modes is rather delicate but it seems being related with the elastic flexibility of the bolt which depends upon the unused thread length. The fracture mode occurs in the bolts with good flexibility while the latter with bad one. According to the ISO Standard some meter coarse threads like M20 and M22 have the same pitch which causes bigger fastener to less resistance in shear and bending compared with the smaller one. however since UNC thread system adapts different pitch for different nominal diameter unified coarse threads show better stripping resistance than their corresponding meter threads.