• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.12
• /
• pp.1711-1717
• /
• 2020

X-ray of up to 9MeV are used for container inspection. X-ray intensity must be maintained stably regardless of changes in time. If dose is not constant, it may affect the image quality, and as a result, may affect the inspection of abnormal cargo. Therefore, to acquire high-quality images, continuous dose monitoring is required. In this study, the ion-chamber based device was developed for monitoring the dose change in high-energy x-ray. And to estimate the performance of signal-processing device change according to the environmental change, the output changing due to the change of temperature and humidity was observed. In addition, verification of the device was performed by measuring the output change. As a result of the measurement, there was no significant difference in performance due to changes in temperature and humidity, and the change in output according to the change in exposure was linear. Therefore, it was found that the developed device is suitable for the dose monitoring of high-energy x-ray.

• Journal of Korean Society of Transportation
• /
• v.26 no.3
• /
• pp.7-16
• /
• 2008

The immigration procedure at airports is vital to making passenger and cargo transport faster. The rapid procedure of immigration could be an important determining factor when passengers select an air transport company, one that should have high satisfactory in terms of their service level and efficiency. Therefore, the advanced airport makes it easy for customers and their cargo to proceed. The coordination between authorities related to the Korean international airport is not satisfactory for customers. This paper analyzes the factors necessary to enhance the airport immigration procedure with the movement of aircrafts, passengers, cargo, and post, using the CK(Cook and Kress) model of DEA(Data Envelopment Analysis). From this study, the author found that research and development will be needed to improve the immigration procedure, especially on facilities and their operating systems. There are needed, also, performance indicators and a continuous monitoring system.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.1
• /
• pp.43-55
• /
• 2018

The biggest change in the field of coastal ship safety control since the accident of passenger ship Sewol has been the introduction of the maritime safety supervisor system. With its introduction, the safety control system in coastal passenger ships was changed from consisting of operation managers and marine police to operation managers and a newly-introduced maritime safety supervisor. The safety control system for coastal cargo ships was also converted from relying on ship inspection officers to having a maritime safety supervisor and ship inspection officers. However some negative elements have surfaced due to confusion related to the scope of work in the coastal cargo shipping field. These have been caused by dividing the supervisory agency, a lack of work continuity given non-permanent public official status, low supervisor qualifications overlooking reality, and limitations of the order for improvement to secure seaworthiness. It is essential that the maritime safety supervisor system be solidified to reinforce coastal ship safety control. Therefore, systematic safety control in the coastal cargo shipping industry should be conducted by a single, integrated government agency, and the area covered by the order for improvement to secure seaworthiness should be extended. Also limitations of the supervisor recruitment system due to non-permanent public official status should be simultaneously improved. In addition, it is necessary to upgrade supervisor qualifications to require experience with surveyors of international class, ship captains, and chief engineers.

• International Commerce and Information Review
• /
• v.17 no.3
• /
• pp.299-322
• /
• 2015

Generally Container can be seperated from FCL and LCL. The LCL cargo can be evaluated as a cargo that makes it possible to attract a relatively stable volume and create added value. The aim of this study is to suggest improvement plan for atrracting LCL cargo in Pyeongtaek Port. In order to achieve the object of the study, The research structure is following. 1) analyzing a movement path of the LCL cargo occurring in Pan Yellow-Sea. 2) analyzing the problems to handle LCL cargoes in Pyeongtaek Port. The basic data for analyzing the movement path of LCL Cargoes utilize the data of the Customs Service. and the problems of LCL freight handled suggested from forwarder, carferry liners, and bonded warehouse companies by interview. In this study, We use Fuzzy-AHP as the methodology to analyze the importance of attracting major improvement for LCL shipments in Pyeongtaek Port. As the result, The expansion of inspection equipment and personnel was presented as the most important improvement too solve the clearance problems that is the most serious problems in Pyeongtaek Port. and The realization of incentive payments that local government pay for Profitability of related companies are needed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.695-698
• /
• 2014

As most the scanning systems developed until now provide radiation scan plane images of the inspected objects, there has been a limitation in judging exactly the shape of the objects inside a logistics container exactly with only 2-D radiation image information. Two 2-dimensional radiation images which have different disparity values are acquired from a newly designed stereo image acquisition system which has one additional line sensor to the conventional system. Using a matching algorithm the 3D reconstruction process which find the correspondence between the images is progressed. In this paper, we proposed a new volume based 3D reconstruction algorithm and experimental results show the proposed new volume based reconstruction technique can provide more efficient visualization for cargo inspection. The proposed technique can be used for the development of the high speed and more efficient non-destructive auto inspection system.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.1
• /
• pp.145-149
• /
• 2014

In this study, using X-ray cargo container scanning device and to differentiate the concept of three-dimensional information extraction applied for X-ray scanning device as an ingredient in the rotation of the X-Ray Linear Pushbroom Stereo System by introducing the geometric How to model was introduced. Three-dimensional information obtained through the matching of a single voxel space filled with a random vector operations for each voxel in the three dimensional shape reconstruction algorithm using the definition, and in time, the time required for each step were analyzed. Using OpenCV in each step by applying parallelization techniques approximately 1.8 times improvement in the processing time of the check, but do not meet the target within one minute levels. The other hand, X-ray images by the primary process to convert the point View the results of real-time stereo through a three-dimensional could feel the comfort level.

• Journal of Radiation Protection and Research
• /
• v.42 no.4
• /
• pp.197-204
• /
• 2017

Background: X-ray imaging detectors for the nondestructive cargo container inspection using MeV-energy X-rays should accurately portray the internal structure of the irradiated container. Internal and external factors can cause noise, affecting image quality, and scattered radiation is the greatest source of noise. To obtain a high-performance transmission image, the influence of scattered radiation must be minimized, and this can be accomplished through several methods. The scatter rejection method using an anti-scatter grid is the preferred method to reduce the impact of scattered radiation. In this paper, we present an evaluation the characteristics of the signal and noise according to physical and material changes in the anti-scatter grid of the imaging detector used in cargo container scanners. Materials and Methods: We evaluated the characteristics of the signal and noise according to changes in the grid ratio and the material of the anti-scatter grid in an X-ray image detector using MCNP6. The grid was composed of iron, lead, or tungsten, and the grid ratio was set to 2.5, 12.5, 25, or 37.5. X-ray spectrum sources for simulation were generated by 6- and 9-MeV electron impacts on the tungsten target using MCNP6. The object in the simulation was designed using metallic material of various thicknesses inside the steel container. Using the results of the computational simulation, we calculated the change in the scatter-to-primary ratio and the signal-to-noise ratio improvement factor according to the grid ratio and the grid material, respectively. Results and Discussion: Changing the grid ratios of the anti-scatter grid and the grid material decreased the scatter linearly, affecting the signal-to-noise ratio. Conclusion: The grid ratio and material of the anti-scatter grid affected the response characteristics of a container scanner using high-energy X-rays, but to a minimal extent; thus, it may not be practically effective to incorporate anti-scatter grids into container scanners.

• Journal of the Korean Institute of Navigation
• /
• v.23 no.4
• /
• pp.43-61
• /
• 1999

To ensure ship's safety and preserve the marine environment from ship, IMO(International Maritime Organization) has been making much efforts. Nevertheless there are still many possibilities threatening ship's safety and the marine environment. Many vessels navigate at sea in lack of standard required by the International Convention relevant to ship's safety and the protection of marine environment. Even though the administration is responsible for perfect and continuous control for safety of ship, it cannot has jurisdiction over ships hoist its flag reasonably at all times. So the Port State has strengthened the Port State Control(PSC) activity as one step of eliminating sub-standard vessels. In the light of the fact that mentioned above, this study deals with PSC activity in Korea and port of Pusan. Total 582 ships, inspected in port of Pusan from 1st January 1998 to 30th September 1999, were analyzed in various aspect and extracted results as follows : \circled1 The inspection rate in Korea was much lower than the other states taking part in Tokyo MOU, \circled2 For flag state, the ships belong to flag of convenience(FOC) had much more deficiencies than non-convenience flag ships, \circled3 For ship type, 39 number of general dry cargo ship were detained at Pusan with serious deficiencies, \circled4 For deficiency item, the items such as life saving appliances, safety in general, navigation, load lines and fire-fighting appliances were occupied over 71.7% of total number of deficiencies, \circled5 In Asia-Pacific region, Korea was one of flags with detention percentages exceeding 3-year(1996~1998) rolling average detention percentage. Average detention rate of Korean vessels was 6.73% which was over 0.24% of average detention rate(6.49%) in Asia-Pacific region. These results may reflect to improve the performance of PSC inspection for foreign vessels and are useful for preparing PSC inspection for ocean-going ships registered in Korea.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.6
• /
• pp.671-676
• /
• 2014

Based on the data of PSC information management system of MOF(Ministry of oceans and fisheries) and APCIS(Asia-Pacific Computerized Information System) of Tokyo-MOU information system, the result of the evaluation on the reality of PSC was done, and base on 2009, it showed a trend of decrease in every DFR(Deficiency Rate) and DTR(Detention Rate). But for vessels built for more than 30 years, flags of convenience vessels, RO-RO ferry and general cargo vessel, small size vessels with gross tonnage less than 1,000 ton showed a high DFR and DTR. Each harbours is classified by the total harbours' average DFR which was 82.5 % and the average DTR was 5.1 %, excluding the Jeju harbour, showing a hugh deviation for classification of each harbour. Classification of each harbour has to be inspected by PSC and it showed a great unbalance of the number of vessels for each territory for inspection. the biggest problem with our country's PSC, where it was pointed out by the PSCO was lack of workers and independent inspection by just one worker. To strength the substantiality of the inspection of our country is to have concentrated inspection on the high risk cautious vessels, forming a human network each classified by four different sectors of the area, recalculating the amount of assignment of inspection classified by each harbour and securing workforce the PSCO improvements are necessary.

• Proceedings of the Safety Management and Science Conference
• /
• 2009.11a
• /
• pp.461-470
• /
• 2009

A railroad has a benefit of the mass transportation of a passenger and cargo, but just a time of accident could cause a huge loss of a human life and property. Especially, a typhoon and a localized torrential downpour usually happened in summer season have caused average 38.29 times of the missing roadbed which support the railroad in recent 7 years. If a train would pass on this railroad which the roadbed was missed, there could be a huge accident and many people will die. But, the security issue is not satisfied because the method of sensing the missing roadbed is depending solely on the naked eye inspection by a person in charge. So, in this study, I would like to suggest the missing roadbed real-time sensing and train operation system to reduce the possibility of the railroad accident by controlling the operation of train when the missing roadbed condition would be sensed in the real-time system.