• Journal of the Korean Institute of Navigation
• /
• v.17 no.3
• /
• pp.57-68
• /
• 1993

The economy of Korea has grown up significantly in its scale. It has, therefore, become imperative to develop countermeasures to prevent work related injuries and occupational illnesses resultining from haza-rdous working conditions and handling harmful substances. A lot of cargo handling accident in port have occurred due to the characteristics of poor working environment, diversity of working place and method, fluctuation of the amount of cargo and handling of heavy, long, harmful and dangerous cargo, etc. According to '91 industrial accident analysis carried out by the ministry of labour, the number of the stevedores injured by cargo handling accident in port were 1, 432 persons (the death accident : 22 per-sons), the amount of industrial accident compensation in port was 6.7 billion won (the amount of economic loss : 33.6 billion won), and the injury occurance rate of the stevedoring industry was higher than that of the whole industry. This paper, therefore, aims to the actual status of the stevedoring industry and to extract the main cau-ses of the accidents related to cargo handling in port through factor analysis using the data of the accide-nts in the whole habour from 1990 to 1992, and to suggest the countermeasures to prevent such accident. The main causes of the accident and countermeasures are found to be as follows through the factor analy-sis : Factor1, factor2, and factor3 related to a defect of human being and management, a defect of state and environment, and an insufficiency of education and law are extracted. The short-term countermeasures to prevent these accidents are 1) to consolidate the safety and health organization in the working spot, 2) to secure a safe condition in working spot before dock work, 3) to strengthen a dock worker's safety educa-tion. The long-term countermeasures are 1) to promote a decasualisation of dock workers, 2) to modernize the cargo working methods through constructing exclusive pier and introducing exclusive cargo handling equipment, 3) to establish a exclusive dock accident prevention organization and the dock workers law. Factor 4, factor5, factor6, and factor7 related to an unfitness, a deficiency of technical knowledge, a nonfu-lfilment of safety measures, and a bad arrangement are extracted. The countermeasures to prevent these accidents are 1) to perform a complete safety inspection of cargo handling equipments and tools and to carry out the dock work according to a working plan, 2) to publish and supply technical safety books, safety instruction book, safety check list, etc., 3) to strengthen the safety patrol at the working spot in habour and to activate a safety fund, 4) to maintain always a clean workshop with the safety consciousness in which the good arragement of the working spot is considered to be the beginning of safety.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.4
• /
• pp.1-14
• /
• 2019

In order to minimize problems related to the performance and safety of automobiles, the "Age Limit for Vehicles System" which restricts the age of buses, taxis, and trucks, was implemented in 1973. This contributed to the reduction of accidents and increase of user's service satisfaction. However, the restriction system for trucks was abolished in August 1997 as it was deemed restrictive to economic growth. It is found that one of main causes of traffic accidents such as Changwon Tunnel accident occurred in recent years, is the aging of trucks. Thus, There is a growing need for the management of the age of trucks. In this study, the time when cargo vehicles need to be managed is suggested, by analyzing the safety of cargo vehicles using vehicles inspection data.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.4
• /
• pp.747-752
• /
• 2020

Special logistics, such as steel coils or steel plates, are being shipped and deployed depending on experienced personnel. Therefore, there is a great possibility of accidents due to immaturity by human error or lack of experience. There is a need to prevent the possibility of such an accident in advance, to apply security requirements required for special logistics, to ensure the stability of cargo, and to operate an management system to check the correct loading list. In addition, accurate shipping inspection is necessary to balance the ship. This paper analyzes the problems of shipping inspection currently being implemented and proposes a web-based port special logistics shipping inspection and balancing operation system to improve it.

• Journal of Fisheries and Marine Sciences Education
• /
• v.29 no.2
• /
• pp.333-342
• /
• 2017

In this study, we studied and analyzed 3,751 ships regarding detention list of Tokyo MOU from 2013 to 2015 total for 36 months. The Member Authorities of the MOU has 20 committee consists of Korea and Peru joined in 2015. 1,250 ships in a year and 140 ships in a month are granted PSC Action Code-30 corresponding to detention. Averagely, 30,943 ships in a year and 2,579 ships have been received PSC inspection. Additionally, according to this PSC inspection, rate of Detention reaches to 4.04%. When it comes to Korean Flag Ships however, the number of Detention ships of Tokyo MOU has been rather increased from 3 ships in 2013 to 18 ships during 2years. Furthermore, MOU in the all over the world, the number of ships had Detention has largely increased from 5 ships to 9 up-to 19ships. The number of Detention Ships has been reached to 44.8% of 1~2 days period of Detentions, under 3~10 days period of Detentions reaches to 34.7% and over 10 days detention reaches 10.3%, which cause economically enormous loss. Continually, each MOU has been implemented Concentrated Inspection Campaign(CIC) annually. Each MOU including Tokyo MOU implemented "Crew Familiarization for Enclosed Space Entry" for 3 month from september, and During this period, Concentrated Inspection were carried out to 8,429 ships of Tokyo MOU. Accordingly, If ships and owners can get the information of CIC and deliver the information to the ship, then Ships can minimize the rate of Detention by thoroughly preparing for PSC Inspection. In addition, Bulk Carrier and General Cargo ship occupy 50% of rate of Detention and it shows that majority of list among Nature of Deficiencies are identical. Finally, If we can obtain the information of the ships inspected previously, We can reduce the number of detention by preparing for PSC inspection. And this will be able to contribute to shipping industry also.

• Journal of Radiation Protection and Research
• /
• v.48 no.4
• /
• pp.167-174
• /
• 2023

Background: A nondestructive test is commonly used to inspect the surface defects and internal structure of an object without any physical damage. X-rays generated from an electron accelerator or a tube are one of the methods used for nondestructive testing. The high penetration of X-rays through materials with low atomic numbers makes it difficult to discriminate between these materials using X-ray imaging. The interaction characteristics of neutrons with materials can supplement the limitations of X-ray imaging in material discrimination. Materials and Methods: The radiation image acquisition process for air-cargo security inspection equipment using X-rays and neutrons was simulated using a GEometry ANd Tracking (Geant4) simulation toolkit. Radiation images of phantoms composed of 13 materials were obtained, and the R-value, representing the attenuation ratio of neutrons and gamma rays in a material, was calculated from these images. Results and Discussion: The R-values were calculated from the simulated X-ray and neutron images for each phantom and compared with those obtained in the experiments. The R-values obtained from the experiments were higher than those obtained from the simulations. The difference can be due to the following two causes. The first reason is that there are various facilities or equipment in the experimental environment that scatter neutrons, unlike the simulation. The other is the difference in the neutron signal processing. In the simulation, the neutron signal is the sum of the number of neutrons entering the detector. However, in the experiment, the neutron signal was obtained by superimposing the intensities of the neutron signals. Neutron detectors also detect gamma rays, and the neutron signal cannot be clearly distinguished in the process of separating the two types of radiation. Despite these differences, the two results showed similar trends and the viability of using simulation-based radiation images, particularly in the field of security screening. With further research, the simulation-based radiation images can replace ones from experiments and be used in the related fields. Conclusion: The Korea Atomic Energy Research Institute has developed air-cargo security inspection equipment using neutrons and X-rays. Using this equipment, radiation images and R-values for various materials were obtained. The equipment was reconstructed, and the R-values were obtained for 13 materials using the Geant4 simulation toolkit. The R-values calculated by experiment and simulation show similar trends. Therefore, we confirmed the feasibility of using the simulation-based radiation image.

• International Commerce and Information Review
• /
• v.6 no.3
• /
• pp.183-201
• /
• 2004

Recently, Electronic commerce market is growing sharply for the expansion of internet and development of means of air transportation. Import Clearance System for express consignments, introduced in Korea, confers some benefit upon express consignments, ie. prompt clearance, simplification of the clearance procedure, exemption of necessary documents. But it has some problems such as lack of social security and trade compliance. So it requires some improvements as follows. Firstly, it has no legal background to clear all articles valued at US$100 or less carried by an express consignment operator. So customs brokers, not express consignment operators, should clear that articles. Secondly, it should be presented necessary documents including commercial invoice to prevent a wrong price declaration in entering express consignments valued at US$100 or less. Thirdly, X-ray inspectors must enhance their inspection ability. Customs must provide education programs for X-ray inspectors to improve their inspection ability. Lastly, Cargo selectivity system for express consignments have to be improved to operate effectively.

• Journal of Ocean Engineering and Technology
• /
• v.32 no.3
• /
• pp.158-165
• /
• 2018

Generally, container ships contain cargo holds with cell guides that serve to increase the container loading and unloading efficiency, minimize the space loss, and fix containers during the voyage. This paper describes a new quality management system for the cell guides of container ships (the so-called Trim Cell Guide system). The main functions of this system are the trimming of the point cloud obtained using a 3D scanner and an inspection simulation for cell guide quality. In other words, the raw point cloud of cell guides after construction is measured using a 3D scanner. Here, the raw point cloud contains a lot of noise and unnecessary information. Using the GUI interface supported by the system, the raw point cloud can be trimmed. The trimmed point cloud is used in a simulation for cell guide quality inspection. The RANSAC (Random Sample Consensus) algorithm is used for the transverse section representation of a cell guide at a certain height and applied for the calculation of the intervals between the cell guides and container. When the container hits the cell guides during the inspection simulation, the container is rotated horizontally and checked again for a possible collision. It focuses on a system that can be simulated with the same inspection process as in a shipyard. For a practicality review, we compared the precision data gained from an inspection simulation with the measured data. As a result, it was confirmed that these values were within approximately ${\pm}2mm$.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.10a
• /
• pp.33-34
• /
• 2015

The voyage and cargo volume passing through the Arctic route (NSR) have been gradually increased. The ship-ice collision is one of the most biggest factors threatening the safety navigation of ice-going ships. A lot of researchers are trying to reveal the ship-ice collision mechanism. In this study, some tests that a model ship is forced to collide with disk-shaped synthetic ice are carried out in a towing tank. Then, ice floe's motion (velocity and trajectory) is measured by machine vision inspection.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.7
• /
• pp.1583-1590
• /
• 2011

As the existing radiation scanning systems use 2-dimensional radiation scanned images, the low accuracy has been pointed out as a problem of it. This research analyzes the applicability of the stereo image processing technique to X-ray scanned images. Two 2-dimensional radiation images which have different disparity values are acquired from a newly designed stereo image acquisition system which has one additional line sensor to the conventional system. Using a matching algorithm the 3D reconstruction process which find the correspondence between the images is progressed. As the radiation image is just a density information of the scanned object, the direct application of the general stereo image processing techniques to it is inefficient. To overcome this limitation of a stereo image processing in radiation area, we reconstruct 3-D shapes of the edges of the objects. Also, we proposed a new volume based 3D reconstruction algorithm. Experimental results show the proposed new volume based reconstruction technique can provide more efficient visualization for cargo inspection. The proposed technique can be used for such objects which CT or MRI cannot inspect due to restricted scan environment.

• Journal of Korea Society of Industrial Information Systems
• /
• v.23 no.1
• /
• pp.1-12
• /
• 2018

This paper presents a material estimation method using dual-energy X-ray images generated as a result of cargo inspection system in MeV region. We use new discrimination curve using logarithmic function rather than four discrimination curves commonly used in existing estimation algorithms. We also propose an atomic number estimation using the probability distribution of the logarithmic curve rather than linear interpolation. When the probability distribution is used as a weight, we used two methods of using the weight for the two nearest reference materials and the weight for all the reference materials. Experimental results showed that the atomic number estimation of materials using the probability distribution as a weight is more accurate than the existing methods. In order to visualize the estimated atomic number, the HSI model was used for color the resulting image.