• Composites Research
• /
• 제36권4호
• /
• pp.246-252
• /
• 2023

멤브레인 형 LNG 화물창시스템(Cargo containment system, CCS) 내 유리섬유 강화 복합재료 기반 2차 방벽 설치 시 본딩 자동화 머신(automatic bonding machine, ABM) 활용한 prolonged 구조임과 동시에 양단 접착 고정 사이 비 접착(non-bonding, N-B) 영역의 복합재에서 극저온 열 수축 기인한 상당한 열 응력이 발생하기 때문에 이를 고려한 구조 안전성평가 관점에서 수행된 연구가 있으나 실제로 무한히 긴 길이 고려한 기계적 물성 평가를 수행한 연구는 찾아볼 수가 없었다. 해당 복합재는 파단강도 분산이 큰 세라믹 재료 취성 파괴임을 고려하여 2-파라미터 Weibull 통계분석을 통해 실제 길이 대상 신뢰도 있는 기계적 물성치 값을 표준화 하였으며 LNG 운반 환경을 고려한 극저온 환경까지의 특정 온도별 단축 인장실험을 수행하였다. 실험결과, -70℃에서 기계적 강도가 -20℃에 비해 약 1.5배 급증하고 초기 권축 섬유 신장의 비선형 거동이 억제되었다. 또한, 극저온 환경까지 온도가 낮아질수록 기계적 강도는 계속해서 증가하였으나 반대로 연신은 줄어드는 저온 취성의 현상이 확인되었다. 본 연구에서 제시하는 기계적 물성치 데이터는 멤브레인 형 LNG 화물창 구조 안전성 평가 시 신뢰도 높은 해석 지원 물성치 확보 측면에서 유용하게 적용되어지리라 사료된다.

• 대한조선학회논문집
• /
• 제56권2호
• /
• pp.103-108
• /
• 2019

A new state-of-the-art sloshing research equipment has developed to perform the model test of LNG tanks for the safer design of LNG cargo containment system in violent sloshing phenomena. This sloshing test system has developed by the Samsung Ship Model Basin (SSMB) and thoroughly verified. The accuracy of the motion of hexapods equipment for the excitation of a model tank has been verified. The maximum displacement in six degrees of freedom, harmonic motions of various frequencies, and irregular motions in wave conditions are measured and compared with input signals. In order to confirm the reliability of the post-processing program for measured impact pressure, the post-processed results were compared with those of the reference institute. A benchmarking sloshing test using 1/50 scale model of 160K LNGC tank was conducted for the verification of the whole testing system. The partial filing levels were considered. As a result of the experiment, it is confirmed that the results are in good agreement with those of the reference institute.

• 대한조선학회논문집
• /
• 제56권6호
• /
• pp.515-522
• /
• 2019

Since Liquefied Natural Gas (LNG) is normally carried at 1.1 bar pressure and at -163℃, special Cargo Containment System (CCS) are used. As LNG carrier is becoming larger, typical LNG insulation systems adopt a method to increase the thickness of insulation panel to reduce sloshing load and Boil-off Rate (BOR). However, this will decrease LNG cargo volume and increase insulation material costs. In this paper, silica aerogel, glass bubble were synthesized in polyurethane foam to increase volumetric efficiency by improving mechanical and thermal performance of insulation. In order to increase dispersibility of particles, ultrasonic dispersion was used. Dynamic impact test, quasi-static compression test at room temperature (20℃) and cryogenic temperature (-163℃) was evaluated. To evaluate the thermal performance, the thermal conductivity at room temperature (20℃) was measured. As a result, specimens without ultrasonic dispersion have a little effect on strength under the compressive load, although they show high mechanical performance under the impact load. In contrast, specimens with ultrasonic dispersion have significantly increased impact strength and compressive strength. Recently, as the density of Polyurethane foam (PUF) has been increasing, these results can be a method for improving the mechanical and thermal performance of insulation panel.

• 대한조선학회논문집
• /
• 제56권4호
• /
• pp.335-342
• /
• 2019

The objective of this study is to analyze the mechanical properties of plywood used as a thermal insulating material for LNG CCS (Liquefied Natural Gas, Cargo Containment System). It is created by bonding an odd number of parallel and perpendicular direction for preventing contraction and expansion of wood. Also plywood is widely used as LNG CCS insulating material because of its durability, light weight and high stiffness. Since LNG CCS is loaded with liquid cargo, the impact load by sloshing during operation and the wide temperature range (room temperature, low temperature, cryogenic temperature) exposed during loading, unloading should be considered. The thickness of the plywood which is used for the membrane type MARKIII was selected as the thickness of the test specimen. In this present study, plywood is analyzed by the fracture behavior and mechanical properties of plywood by temperature and grain direction. In addition, it is necessary to analyze the fracture shape and predict the fracture strain by using regression model because the critical load may cause cracks inside the tank, which may affect the leakage of cryogenic liquid.

• Journal of Ship and Ocean Technology
• /
• 제11권3호
• /
• pp.24-38
• /
• 2007

It is a very challenging work to design large Arctic LNG carrier, since LNG carrier requires high reliability for the structural safety and the environment of Arctic region is known to be very severe. Therefore, special attention should be paid for the verifying the structural safety of LNG career particularly with regard to LNG leakage. In this paper, the safety of the hull structure and cargo containment system of 208K MK $III^{TM}$ type LNG carriers with Arc4 is investigated based on the direct calculation of ice loads as well as wave loads. From the whole investigation, it is clear that the developed vessel - 208K MK $III^{TM}$ type LNG carrier with RMRS Ice class Arc4 - has enough strength and is safe to be operated in Arctic region.

• 한국해양공학회지
• /
• 제33권6호
• /
• pp.547-555
• /
• 2019

The purpose of this study was to establish a numerical model of polyurethane foam (PUF) to simulate the dynamic response and strength of membrane-type Liquefied natural gas (LNG) Cargo containment system (CCS) under the impact load. To do this, initially, the visco-plastic behavior of PUF was characterized by testing the response of the PUF to the impact loads with various strain rates as well as PUF densities at room temperature and at cryogenic conditions. A PUF material model was established using the test results of the material and the FE analysis. To verify the validation of the established material model, simulations were performed for experimental applications, e.g., the dry drop test, and the results of FEA were compared to the experimental results. Based on this comparison, it was found that the dynamic response of PUF in dry drop tests, such as the reaction force and fracture behaviors, could be simulated successfully by the material model proposed in this study.

• 한국해양공학회지
• /
• 제24권5호
• /
• pp.31-38
• /
• 2010

The Floating storage and re-gasification unit (FSRU), which has large cargo storage tanks, is a floating liquefied natural gas (LNG) import terminal. The sloshing motion in tanks that are partially filled with LNG can cause impact pressure on the containment system and affect the global motion of the FSRU. Therefore, the accurate prediction of sloshing motion has been a significant issue in the offshore gas production industry. In this paper, a particle method based on the moving particle semi-implicit (MPS) method proposed by Koshizuka and Oka (1996) has been modified to predict sloshing motion accurately in a rectangular tank with the filling ratio of water. The simulation results, including the violent sloshing of the fluid, were validated by comparison with the original MPS method.

• 대한조선학회논문집
• /
• 제48권5호
• /
• pp.451-456
• /
• 2011

To ensure structural integrity of membrane type LNG tank, the rational assessment of the sloshing impact responses of tank structures should be preceded. The sloshing impact pressures acting on the insulation system of LNG tank are typical irregular loads and the resulting structural responses show very complex behaviors accompanied with fluid structure interaction. So it is not easy to estimate them accurately and immense time consuming calculation process would be necessary. In this research, a simplified method to analyse the dynamic structural responses of LNG tank insulation system under pressure time histories obtained by sloshing model test or numerical analysis was studied. The proposed technique based on the concept of linear combination of the triangular response functions which are the transient responses of structures under the unit triangular impact pressure acting on structures. The validity of suggested method was verified through the example calculations and applied to the dynamic structural response analysis of a real Mark III membrane type insulation system using the sloshing impact pressure time histories obtained by model test.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 학술대회
• /
• pp.308-315
• /
• 2008

극저온 유체를 운반하는 선박의 화물창은 보통 1차 방벽과 2차 방벽으로 구성되어 있다. 1차 방벽에 소량의 극저온 유체의 누출이 생기더라도, 액밀이 되는 2차 방벽에서 추가적인 극저온 유체의 누출을 방지할 수 있기 때문이다. 그러나 2차 방벽에 추가적인 손상이 생길 경우 유리솜으로 만들어진 Flat Joint를 거쳐 선체내벽까지 극저온 유체에 노출될 가능성이 있게 된다. 본 연구의 관심사는 2차 방벽의 손상 정도에 따라, 그리고 누출되는 극저온 유체의 양에 따라, 내측선체에 얼마나 영향이 미치는가를 알아보는 것이다. 이를 위해 본 연구에서는 극저온 유체를 운반하는 선박의 화물창을 구성하는 2차 방벽에 구멍을 뚫어 Flat Joint 사이로 극저온 유체가 흘러 들어가도록 격자를 생성한 후, CFD 소프트웨어를 이용하여 극저온 유체의 누출에 대한 계산을 수행 하였으며 이를 실험 결과와 비교 분석 하였다. 실험과 계산 결과를 살펴보면, 극저온 유체량에 따라 내측 선체에의 피해를 최소화 할 수 있음을 확인하였다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년 추계학술대회논문집
• /
• pp.308-315
• /
• 2008

극저온 유체를 운반하는 선박의 화물창은 보통 1차 방벽과 2차 방벽으로 구성되어 있다. 1차 방벽에 소량의 극저온 유체의 누출이 생기더라도, 액밀이 되는 2차 방벽에서 추가적인 극저온 유체의 누출을 방지할 수 있기 때문이다. 그러나 2차 방벽에 추가적인 손상이 생길 경우 유리솜으로 만들어진 Flat Joint를 거쳐 선체내벽까지 극저온 유체에 노출될 가능성이 있게 된다. 본 연구의 관심사는 2차 방벽의 손상 정도에 따라, 그리고 누출되는 극저온 유체의 양에 따라, 내측선체에 얼마나 영향이 미치는가를 알아보는 것이다. 이를 위해 본 연구에서는 극저온 유체를 운반하는 선박의 화물창을 구성하는 2차 방벽에 구멍을 뚫어 Flat Joint 사이로 극저온 유체가 흘러 들어가도록 격자를 생성한 후, CFD 소프트웨어를 이용하여 극저온 유체의 누출에 대한 계산을 수행 하였으며 이를 실험 결과와 비교 분석 하였다. 실험과 계산 결과를 살펴보면, 극저온 유체량에 따라 내측 선체에의 피해를 최소화 할 수 있음을 확인하였다.