• Korean Journal of Poultry Science
• /
• v.32 no.3
• /
• pp.179-186
• /
• 2005

This study was conducted to establish a comprehensive guideline for grading system of poultry meat cuts. Slaughter and further processed houses were divided into large(>70,000 heads/day), middle($50,000\~25,000$ heads/day), and small scale(<25,000 heads/day), and the production managers were asked by the Questionnaire. Most poultry meat cuts produced by larger- and middle-slaughter house were consumed by dealers, franchisee and department store in increasing order, whereas further processed poultry meat cuts(small scale) provided meals for the students in the high amount. The packaging step was best f3r the determination of grading in the large slaughter house. This survey indicated that two or more grades were proper to determine the grading in the middle slaughter house, however only two grades were proper for the others. Freshness, bruise, wound, trimming and the inclusion of foreign materials affected to the grading. Poultry meat cuts were accepted for the grading in large-slaughter house, but whole poultry carcass was accepted for the grading in the others. Most managers agreed with that the grading system was only applied for the amounts requested. They also suggested that the grading system of poultry meat cuts were necessary in near future, even though it was not urgent to apply.

• Korean Journal of Agricultural Science
• /
• v.41 no.3
• /
• pp.229-236
• /
• 2014

This study presents the estimates of heritabilities of body measurement traits and carcass traits, and genetic and phenotypic correlations of those traits for crossbred pigs in Korea. Body and ultrasound (A mode: Piglog 105) measurements in 221 pigs including body weight, length, height and width, three back fat thickness at the points of 4th, 14th rib and chine bone, eye muscle area and lean meat percent were collected at the ages of 70, 145 and 180 days and then slaughtered to measure carcass weight, back fat, belly, collar butt, spare rib, picnic shoulder, hind leg, loin, tenderloin, lean meat yield and intramuscular rough fat content in loin. Genetic analysis was done using a multi-trait animal model. Heritabilties of the body measurements were ranged from 0.331 to 0.559 and three measurements of back fat thickness were also high as range varying from 0.402 to 0.475 for the ages of 145 and 180 days. However, eye muscle area was moderate (0.296) at the age of 180 days. Heritabilities of retail cut yields were also high as ranged from 0.387 to 0.474 and of IMF content in loin was 0.499. Heritabilities of the cut percent traits were ranged from 0.249 to 0.488. Important positive genetic and phenotypic correlations were noted for all carcass yield traits (0.298 to 0.875 and 0.432 to 0.922, respectively). IMF showed low negative genetic correlations with carcass yield traits, such as carcass weight, picnic shoulder, hind leg, loin, tenderloin and lean meat yield whereas low positive genetic correlations with back fat, belly, collar butt and spare rib. Loin, tenderloin and lean meat percent showed negative genetic correlations with carcass weight, back fat thickness, collar butt, spare rib and picnic shoulder percent. The four body measurements at the ages of 70, 145 and 180 days had positive genetic correlations with belly, shoulder butt, spare rib, picnic shoulder and hind leg percent, but negative genetic correlations were shown with loin and tenderloin percent except body measurements at 70 days. The results suggest that carcass yield are negatively correlated with intramuscular fat content, which is a major factor deciding pork quality and the yield of loin and tenderloin are not increased as much as increase in body size. However, the proportions of belly and collar butt are increased with the body size. In conclusion, selection strategy should be designed according to the preference on composition of carcass in each country.

• Journal of Animal Science and Technology
• /
• v.62 no.5
• /
• pp.753-760
• /
• 2020

The objective of this study was to investigate the influence of increasing carcass weight (CW) on meat quality traits including meat color, water-holding capacity (WHC), tenderness, backfat thickness and intramuscular fat (IMF) content of pork loin. A total of 96 pork carcasses (48 LYD [Landrace × Yorkshire × Duroc] barrows and gilts) were selected at a commercial slaughterhouse. Each gender had commercial CW (≤ 90 kg), heavy CW (91-100 kg) and very heavy CW (> 100 kg) (16 carcasses from each CW group). Loin cuts (Longissimus lumborum) were excised to investigate meat color (CIE L*a*b*), drip loss, cooking loss, released water, Warner-Bratzler shear force (WBSF), and IMF content. Backfat thickness and IMF content of pork loin samples were significantly (p < 0.05) increased with increasing CW, although there was no significant difference in ultimate pH (pHu). CIE a* increased significantly (p < 0.05) with increasing CW, while there were no significant differences in CIE L* or CIE b* among CW groups. Although all WHC measures showed no significant differences among CW groups, WBSF increased significantly (p < 0.01) with increasing CW. Sensory flavor score was significantly increased while panel score for tenderness was decreased significantly (p < 0.001) with increasing CW. Consequently, CW had a positive correlation with flavor but negative correlation with tenderness. These results indicate that the increased IMF content improves flavor, juiciness and palatability, although tenderness deteriorates with increasing CW.

• Asian-Australasian Journal of Animal Sciences
• /
• v.8 no.2
• /
• pp.139-143
• /
• 1995

Two hundred eighty weaned Targhee lambs were grazed on annual grass-subclover pastures for 84 d under continuous and rotational defoliation grazing system. At the end of the grazing season, twenty lambs weighing 44 kg were slaughtered directly off the pasture, whereas two groups of 20 lambs each were fed either a alfalfa pellet or a 50% alfalfa/50 concentrate pellet for additional 6 wk until they reached an average live weight of 50 kg. Carcass traits and loin chop palatability were compared. Lambs slaughtered directly off the pasture were lighter than desirable market weight and some lambs had less than adequate fat cover and approximately half of them were graded U.S. Good in quality. Overall conformation and leg muscling was inferior and loin chops were less tender, less juicy and less flavorful. The lambs on alfalfa pellets for 6 wk appeared to be ideal in terms of carcass quality (all Choice except one), fat cover and yield grade. They had better taste panel scores in all palatability traits than off-the-pasture lambs, and most loin chops were acceptable. The lambs on a 50% concentrate diet for 6 wk had a higher conformation score and a greater muscling in the legs. Loin chops had more marbling and better palatability than other groups. However, some lambs had an excessive fat cover and lower yield of retail cuts. It was concluded that additional feeding for 6 wk on alfalfa pellets until the live weight reached 50 kg(for Targhee lambs) was the best way of finishing lambs at the end of grazing season in the California rangeland.

• Korean Journal of Poultry Science
• /
• v.17 no.1
• /
• pp.33-44
• /
• 1990

This studies were conducted to investigate the difference of carcass characteristics between chicken broiler and duck broiler and the carcass characteristics of chicken broiler by sex, rearing type, season and feed and water deprivation with 240 chicken broilers and 20 duck broilers. The results obtained are summerized as follows. 1. The carcass yields were 65.43% in chicken broiler and 66.78% in duck broiler. The abdominal fat pad of chicken broiler was higher than that of duck broiler. 2. There were differences in commercial cuts production percentages between chicken broiler and duck broiler, and the commercial cut of chicken broiler was produced from drumsticks and thighs, breast back, wings and neck in order. 3. Although there was little difference in carcass yields between male and female of broiler, the abdominal fat pad of male broiler was lower than that of female broiler. 4. The carcass yields in cage and floor type were not different, but the abdominal fat pad in cage was slightly higher than that in floor. 5. There was no difference in carcass yields among Spring, Summer, Autumn and Winter, but the abdominal fat pad was highest in Summer and lowest in Winter. 6. As feed and water deprivation time increased by one hour, live weight was decreased by 0.28365% , and the carcass yield was highest after 6 hours depribated feed and water.

• Korean Journal of Food Science and Technology
• /
• v.12 no.1
• /
• pp.34-40
• /
• 1980

In order to establish the frozen storage method of pork and contribute to the stabilization of pork price physicochemical changes and sensory evaluation of pork, stored at $-20^{\circ}C$ up to the period of 12 months, were analyzed every three months. The drip loss of frozen meat cuts was below 1% regardless of storage months. In the course of storage, pH of frozen half carcass rose a little, while that of meat cuts remained almost the same. WHC(water holding capacity) of frozen half carcass and meat cuts was in the range of $50{\sim}60\;and\;55{\sim}62%,$ respectively and VBN (volatile basic nitrogen) was about $11{\sim}18mg%,$ all of which did considerably change during the storage. TBA(thiobarbituric acid) value was not increased up to the 6th month of storage, but represented a considerable increase after the 9th month of storage, Both tenderness and juiciness of frozen pork were decreased after the 12th month of storage but the axxrptability of frozen pork to the consumers turned out fairly good.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.12
• /
• pp.1745-1752
• /
• 2008

This study was conducted to compare the growth performance and carcass evaluation of Jeju native cattle (JNC) and its crossbreds (CBK = 25 JNC: 50 Charolais: 25 Brahman and BCBK = 62.5 JNC: 25 Charolais: 12.5 Brahman) fed for a short fattening period. Eight male calves each of JNC (80.$40{\pm}10$), CBK ($113.50{\pm}12.3$), and BCBK ($100.3{\pm}9.5$) were weaned at 4 month of age and were fed similar diets for 18 months of their age. All animals were fed a growing ration until 12 months of age and thereafter switched to a fattening ration for a period of 6 months. Final body weight (BW) and BW gain were significantly higher in CBK and BCBK compared with JNC. The CBK and BCBK gained 27.42% and 25.99% more BW, respectively, compared with JNC. The CBK and BCBK animals consumed significantly less DM than JNC to gain a unit of BW. Body weight gain, DM intake and feed conversion efficiency were similar between CBK and BCBK. Weight of hot and cold carcass, ribs, boneless meat and Longissimus dorsi muscle area were significantly different among JNC and its crossbreds. The heaviest carcass was observed in CBK followed by BCBK and JNC. Carcass, chest and femur lengths were greater in CBK and BCBK compared with JNC. Chest width, chest depth and hip width were similar in JNC and its crossbreds. Femur width was significantly greater in CBK compared with BCBK and JNC. Femur depth and chest girth were significantly greater in CBK and BCBK compared with JNC. Weight and fat yield in different carcass cuts were greater in crossbreds compared to JNC. Percent moisture, crude ash, and crude protein of meat were similar in JNC and its crossbreds. Percent crude fat in beef was significantly greater in JNC compared with its crossbreds. Beef shear force value, percent water holding capacity, juiciness and tenderness were significantly greater for JNC compared to its crossbreds. In conclusion, CBK and BCBK have shown greater growth rates and produced heavier carcasses with good degree of fatness when compared with JNC.

• Food Science of Animal Resources
• /
• v.30 no.2
• /
• pp.206-215
• /
• 2010

A total of 582 gilts and barrows were analyzed to investigate the regressive relationships to slaughter weight (SW) of variables related to production efficiency and pork quality. Average initial weights and SW were 88.6 and 122.5 kg, respectively, for gilts and 88.7 and 121.4 kg, respectively, for barrows. Average daily gain and gain:feed ratio were not affected by SW. Backfat thickness, which was significantly greater (p<0.01) in barrows (23.3 mm) than in gilts (20.7 mm), increased with increasing SW (0.21 mm/kg; p<0.001). When the 4-notch carcass yield and quality grades were quantified according to an arbitrary 1 point-per-1 notch scale, the former, but not the latter, regressed on SW (-0.64/10 kg; p<0.01). The percent yield of the belly per total lean (overall mean=20.7%) increased with increasing SW (0.37%/10 kg; p<0.001), whereas in other cuts, the SW effect was negligible. The redness of the loin also increased with increasing SW (p<0.05), but other physicochemical characteristics were minimally influenced by SW. In sensory evaluation, effects of SW for fresh and cooked loin, ham, and belly were mostly considered insignificant in terms of quality, albeit statistically significant in several cases. However, positive regressions on SW (p<0.01) of the marbling and acceptability scores of fresh loin as well as the fat:lean ratio of fresh belly were noteworthy. Collectively, SW of approximately 125 kg was maximal for both sexes under the current carcass yield grading, in which 94 kg is the upper weight limit for grade A carcass. However, if the carcass weight limit of the grading was to be removed or broadened, the SW for gilts (but not that for barrows because of their excessive fat content at above 125-kg SW) could be increased to 135 kg or greater without compromising carcass quality.

• Animal Bioscience
• /
• v.35 no.10
• /
• pp.1489-1498
• /
• 2022

Objective: The objective of this study was to identify polymorphism in olfactomedin like 3 (OLFML3) gene, and association analysis with meat quality, carcass characteristics, retail meat cut, and fatty acid composition in sheep, and expression quantification of OLFML3 gene in phenotypically divergent sheep. Methods: A total of 328 rams at the age of 10 to 12 months with an average body weight of 26.13 kg were used. A novel polymorphism was identified using high-throughput sequencing in sheep and genotyping of OLFML3 polymorphism was performed using polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP). Among 328 rams, 100 rams representing various sheep genotypes were used for association study and proc general linear model was used to analyse association between genotypes and phenotypic traits. Quantitative real-time polymerase chain reaction (qRT-PCR) was used for the expression analysis of OLFML3 mRNA in phenotypically divergent sheep population. Results: The findings revealed a novel polymorphism in the OLFML3 gene (g.90317673 C>T). The OLFML3 gene revealed three genotypes: CC, CT, and TT. The single nucleotide polymorphism (SNP) was found to be significantly (p<0.05) associated with meat quality traits such as tenderness and cooking loss; carcass characteristics such as carcass length; retail meat cut such as pelvic fat in leg, intramuscular fat in loin and tenderloin, muscle in flank and shank; fatty acids composition such as tridecanoic acid (C13:0), palmitoleic acid (C16:1), heptadecanoic acid (C17:0), ginkgolic acid (C17:1), linolenic acid (C18:3n3), arachidic acid (C20:0), eicosenoic acid (C20:1), arachidonic acid (C20:4n6), heneicosylic acid (C21:0), and nervonic acid (C24:1). The TT genotype was associated with higher level of meat quality, carcass characteristics, retail meat cut, and some fatty acids composition. However, the mRNA expression analysis was not different among genotypes. Conclusion: The OLFML3 gene could be a potential putative candidate for selecting higher quality sheep meat, carcass characteristics, retail meat cuts, and fatty acid composition in sheep.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.10
• /
• pp.1670-1676
• /
• 2018

Objective: This study was conducted to enable on-line prediction of primal and commercial cut weights in Korean slaughter pigs by AutoFom III, which non-invasively scans pig carcasses early after slaughter using ultrasonic sensors. Methods: A total of 162 Landrace, Yorkshire, and Duroc (LYD) pigs and 154 LYD pigs representing the yearly Korean slaughter distribution were included in the calibration and validation dataset, respectively. Partial least squares (PLS) models were developed for prediction of the weight of deboned shoulder blade, shoulder picnic, belly, loin, and ham. In addition, AutoFom III's ability to predict the weight of the commercial cuts of spare rib, jowl, false lean, back rib, diaphragm, and tenderloin was investigated. Each cut was manually prepared by local butchers and then recorded. Results: The cross-validated prediction accuracy ($R^2cv$) of the calibration models for deboned shoulder blade, shoulder picnic, loin, belly, and ham ranged from 0.77 to 0.86. The $R^2cv$ for tenderloin, spare rib, diaphragm, false lean, jowl, and back rib ranged from 0.34 to 0.62. Because the $R^2cv$ of the latter commercial cuts were less than 0.65, AutoFom III was less accurate for the prediction of those cuts. The root mean squares error of cross validation calibration (RMSECV) model was comparable to the root mean squares error of prediction (RMSEP), although the RMSECV was numerically higher than RMSEP for the deboned shoulder blade and belly. Conclusion: AutoFom III predicts the weight of deboned shoulder blade, shoulder picnic, loin, belly, and ham with high accuracy, and is a suitable process analytical tool for sorting pork primals in Korea. However, AutoFom III's prediction of smaller commercial Korean cuts is less accurate, which may be attributed to the lack of anatomical reference points and the lack of a good correlation between the scanned area of the carcass and those traits.