• Journal of agriculture & life science
• /
• v.53 no.4
• /
• pp.77-92
• /
• 2019

The purpose of this study was to investigate the carcass characteristics and the primal cut yields from carcasses according to the sex of Hanwoo. Experimental animals comprised of 80 cows, 29 bulls, and 71 steers. After slaughtering, they were evaluated to estimate the productivity of carcass components by market weight, and to predict the beef carcass yield. The average of fasting weight of cow, bull and steer were 634.75 kg, 721.86 kg, and 754.10 kg respectively. Market weight of Hanwoo at cold carcass weight, primal lean cut weight, sub-primal lean cut weight, bone weight and fat weight were 381.01~467.60 kg, 240.79~310.36 kg, 208.27~276.47 kg, 57.23~76.28 kg and 89.19~138.97 kg respectively. Body measurement traits had side length, hindquarter length, cervical vertebrae length, lumbar vertebrae length, sacral vertebrae length, 6th lumbar vertebrae~heel length, 5~6th thoracic vertebrae breadth, 4~5th lumbar vertebrae breadth, 5th sacral vertebrae breadth, 7~8th thoracic vertebrae girth and 7~8th thoracic vertebrae thick were highest length in steer. Carcass weight (CW) were significantly (p<0.05) affected by sex and live weight. The lean meat percentage, fat percentage and bone percentage based on the weight of cold carcasses were significantly different (p<0.05) between sex groups. The primal cuts rate for deungsim, moksim, abdari, udun, suldo, yangjee and satae were higher in bulls than those of the caws and steers. The carcass by-product weight rate in steer had lower oxtail and rib cartilage than cow and bull, while cow showed lower beef leg bones and jappyeo than bull steer (p<0.05). Body measurement traits was always important for primal cut weight estimates.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.1
• /
• pp.143-150
• /
• 2013

The aim of the pilot study was to evaluate slaughter characteristics and carcass composition of indigenous long fat tailed sheep and Small East African goats purchased from the auction markets slaughtered at 1.5 to 2 yrs of age and 20 kg to 25 kg live weight. The animals were slaughtered according to halal standard procedures. The left half carcasses were jointed into eight wholesale joints, and dissected into muscles, fat and bone, which were weighed separately. Sheep had greater (p<0.05) slaughter BW (22.29 kg vs 20.50 kg) and empty BW (20.17 kg vs 18.67 kg) than goats (p<0.05). Dressing percentages were lower (p<0.001) in sheep than goats when carcass weight was expressed as percentage of slaughter BW (42.31% and 47.15%) and empty BW (46.75% and 51.79%). Sheep carcasses had lower (p<0.001) proportion (66.18% vs 71.64%) of muscles and higher (p<0.001) proportion of fat (7.41% vs 3.44%) than goat carcasses. Sheep had proportionally lighter (p<0.001) shoulder (18.89% vs 22.68%) and heavier (p<0.05) proportion of chump (7.916% vs 6.76%) and main rib (8.12% vs 7.07%). Sheep had more (p<0.001) muscles in the leg (28.83% vs 27.08%) and main rib (7.62% vs 6.36%) than goats. Sheep had less (p<0.001) muscles (20.28% vs 23.56%) in shoulder joints when expressed as percentage of total muscle of carcasses. It is concluded that there are differences in sheep and goat both in terms of carcass and joint yields and composition. The present study also implies that there is need to consider setting different meat cuts and prices for these cuts when one takes into account the differences in muscle distribution within joints in sheep and goats.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.5
• /
• pp.661-671
• /
• 2006

Steers (n = 335) of known genetic backgrounds from four fundamentally different growth types were subjected to two production systems to study the main effects and possible interactive effects on carcass composition. Growth types were animals with genetic potential for large mature weight (LL), intermediate mature weight-late maturing (IL), intermediate mature weight-early maturing (IE), and small mature weight-early maturing (SE). Each year, in a nine year study, calves of each growth type were weaned and five steers of each growth type were developed on pasture or feedlot and harvested at approximately 20 and 14 mo of age, respectively. Data recorded were chilled carcass weight and percentages of forequarter, foreshank, chuck, rib, plate, brisket, hindquarter, round, rump, shortloin, sirloin, flank, lean, fat, bone, and retail cuts. The growth $type{\times}production$ system interaction was an important source of variation in chilled carcass weight (p = 0.0395) and percentage retail cuts (p = 0.001), lean (p = 0.001), fat (p = 0.001), rump (p = 0.0454), shortloin (p = 0.0487), and flank (p = 0.001). The ranking of the growth $type{\times}production$ system means for percentage lean was LL-pasture>IL-pasture = IE-pasture = SE-pasture>LL-feedlot, IL-feedlot>IE-feedlot = SE-feedlot. The growth $type{\times}production$ system interaction was non-significant (p>0.05) for forequarter, foreshank, chuck, rib, plate, brisket, hindquarter, round and bone. Growth types of IE and SE yielded greater (p<0.05) mean forequarter than did growth types of IL and LL ($51.6{\pm}0.3$ and $51.5{\pm}0.3$ vs. $51.1{\pm}0.3$ and $50.8{\pm}0.3%$). Mean bone was highest (p<0.05) for the LL growth type and lowest (p<0.05) for the SE growth type ($19.5{\pm}0.5$ vs. $16.8{\pm}0.5%$). Mean bone was greater (p<0.05) for the pastured steers than for the feedlot steers ($21.8{\pm}0.8$ vs. $14.5{\pm}0.6%$). These data indicate that growth type responded differently in the two production systems and that these results should be helpful in the match of genetics to production resources.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.10
• /
• pp.1308-1318
• /
• 2010

The purpose of this study was to evaluate the effect of replacing soybean meal with treated castor meal with (CMT) or without lime (CMNT) on the nutrient intake, performance, carcass characteristics, and yield of commercial cuts of beef cattle from a feedlot. Thirty male, castrated, crossbreed zebu cattle were used in the study, with an average initial weight of $360{\pm}30.27\;kg$. Five animals were used as a control group and were slaughtered at the beginning of the experiment; the remaining animals (n = 25) were distributed in random blocks (repetitions), with body weight as the criterion for block assignment. The animals were fed a diet containing 65% corn silage and 35% of concentrate on dry matter (DM) basis. Five diets consisted of four levels of soybean meal (SM) substituted with CMT (0, 33, 67 and 100%) on a DM basis and a diet with 100% of SM replaced with CMNT. At the end of the experiment, all animals were slaughtered, and their gastrointestinal tracts were emptied to determine their empty body weights (EBW). No significant effects were observed (p>0.05) for the substitution of soybean meal with CMT on intake of dietary nutrients, the average daily body weight gain (ADG) or EBW gain (EBWG). In spite of greater (p<0.05) ricin intake for the diet containing CMNT (3.06 mg/kg BW) compared to the CMT diet (0.10 mg/kg BW/d), there were no effects (p>0.05) on intake of dietary nutrients, ADG or EBWG. The average intake of DM and the ADG were 10,664.63 and 1,353.04 g/d, respectively. Regarding carcass characteristics, only carcass yield in relation to body weight was linearly reduced (p<0.05) upon substitution of SM by CMT. There was no effect (p>0.05) of the substitution of SM by CMT or CMNT on the yield of carcass basic cuts. CMT prices that are higher than 85% of the SM price do not economically justify the use of CMT. For CMT prices between 20 and 80% of the SM price, the optimal level was 67% substitution, while for prices below 15% of the SM price, the optimal level was 100% substitution with CMT. It can be concluded that treated castor meal with 6% lime can totally replace soybean meal in beef cattle diets.

• Journal of Animal Science and Technology
• /
• v.51 no.2
• /
• pp.143-154
• /
• 2009

(Y $\times$ L) $\times$ D-crossbred gilts and barrows weighing $80.2\pm0.2$ kg were fed a "medium-energy" (ME) or "low-energy" (LE) diet (3.2 vs 3.0 M cal DE/kg) and slaughtered at 110, 125, or 138 kg, after which physicochemical and sensory quality traits of major primal cuts of resulting carcasses were analyzed, under a 2 (sex) $\times$ 2 (diet) $\times$ 3 (slaughter weight; SW) factorial arrangement of treatments. The ADG and ADFI were greater (P<0.01) in barrows than in gilts and also in 125- and 138-kg vs 110-kg SW. Moreover, ADG and gain:feed were greater in ME vs LE (P<0.01), whereas ADFI was greater in LE vs ME (P<0.01). Backfat thickness, which increased with increasing SW (P<0.01), was not affected by sex or diet. Carcass marbling score was greater (P<0.01) in gilts and LE than in barrows and ME, respectively. Carcass quality grade, which was superior in LE vs ME, was not affected by SW, whereas the yield grade decreased abruptly between 125- and 138-kg SW primarily due to the upper limit of carcass weight imposed on the A and B grades. Physicochemical characteristics including pH, drip loss, and variables pertaining to color of belly, ham, and loin were not affected significantly by any of the treatment factors, albeit statistically significant in some cases, in terms of quality criteria. In sensory evaluation, the acceptability of fresh belly was not influenced by any of the treatment factors. Marbling score of fresh ham was greater in LE vs ME (P<0.01) and tended to increase between 110- and 125-kg SW (P=0.10); in loin, the increase of this variable between the two SW was significant (P<0.01). Following cooking, LE was superior to ME in the acceptability in belly and ham, but the effect of SW was insignificant in any of the sensory quality traits evaluated in this study in any of the three major primal cuts. In conclusion, the present results suggest that SW can be increased to up to 138 kg without compromising carcass quality and that LE has some beneficial effects on quality of the whole carcass and the major primal cuts.

• Asian-Australasian Journal of Animal Sciences
• /
• v.6 no.2
• /
• pp.225-234
• /
• 1993

A total of 333 carcasses were evaluated for hindquarter traits: round weight, percent round, loin weight, percent loin, flank weight and percent flank. Other characteristics included: total retail, lean trim, fat trim, round steaks, rump, sirloin tip, loin steaks, percent loin steaks and flank steaks. Mating types included straightbred Angus and Santa Gertrudis, the reciprocal crosses of these two breeds and Gelbvieh ${\times}$ Angus. Breed of sire and breed of dam were significant for most of the traits evaluated. Calf year and slaughter group were also significant. This could be the result of environmental variations. Effect of sire within sire breed was non-significant for all the traits considered. Heterosis due to interaction between sire breed ${\times}$ dam breed was found significant for percent total retail cuts based on hindquarter weight. Generally, Santa Gertrudis purebreds were more desirable in cut out characteristics than all other breeding types followed by crossbreds of Angus ${\times}$ Santa Gertrudis.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.3
• /
• pp.377-381
• /
• 2002

The growth rate, feed conversion efficiency and carcass characteristics of nine native Malpura (M) and eight Awassi ${\times}$ Malpura half bred (AM) male lambs were compared under intensive feeding on 60:40 concentrate and roughage based composite feed. Weaning body weight was similar in the two genetic groups while finishing body weight, total body weight gain and average daily gain during the experiment were higher (p<0.01) in AM than M lambs. The feed conversion efficiency was lower in M than AM lambs with 15.7 and 19.8 per cent feed conversion efficiency, respectively, in the two genetic groups. The dressing yield in terms of preslaughter weight or empty live weight was however similar in the two genetic groups. The loin eye area was also greater (p<0.01) in AM than M lambs. The cutability was similar for the two groups amounting to 33.2, 13.3, 13.2, 23.3 and 16.6% of half carcass, respectively, for leg, loin, rack, neck and shoulder and breast and foreshank. On an average the separable lean, fat and KOH bone content of the half carcass were 48.3, 16.8 and 23.3% for native M and 54.1, 15.0 and 19.0% for AM lambs, respectively. It is concluded that growth rate and feed conversion efficiency were better in Awassi ${\times}$ Malpura half bred than native Malpura lambs while dressing yield and cutability of standard cuts were similar in the two genetic groups.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.8
• /
• pp.1112-1119
• /
• 2011

The study aimed to evaluate the best level of licury oil in the diet of 3/4 Boer goats, as determined by profile analysis of commercial cuts on aspects of chemical composition, sensorial quality and fatty acid content. Nineteen male goats were used, with an initial weight of 10.8 kg/live weigh. The animals were fed with hay and a concentrated mix containing different levels of licury oil, which constituted the treatments. The experiment lasted for 60 days, at which point the animals were submitted to feed fasting and slaughtered. The carcass weight, commercial yield and cuts were measured. The ham was collected for sensorial and chemical evaluation and the longissimus dorsi was collected for fatty acid profile analysis. The addition of licury oil to the diet did not promote changes in the proportions and weights of the commercial cuts, nor to the meat's sensorial attributes. The sum of medium-chain fatty acids and the atherogenicity index was increased with the addition of oil. Licury oil can be added to the diet of goats (up to 4.5%) without resulting in changes in to the proportions of the commercial cuts, or to the chemical composition or sensorial characteristics of the meat. Based on the chain length of fatty acids, the addition of 4.5% licury oil can improve the quality of meat, but no effect was noted in relation to the atherogenicity index.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.7
• /
• pp.943-954
• /
• 2009

Diacylglycerol acyltransferase (DGAT) is a key enzyme that catalyzes the final and rate-limiting step of triglyceride synthesis. Both DGAT1 and DGAT2 genes code proteins with DGAT activity. Studies have shown DGAT1 polymorphisms associate with intramuscular fat deposition in beef cattle, but fewer associations between DGAT2 and beef cattle economic traits have been reported. The objective of this study was to investigate single nucleotide polymorphism (SNP) in intron3 of bovine DGAT2 and evaluate the associations of that with carcass, meat quality, and fat yield traits. Test animals were 157 commercial feedlot steers belonging to 3 Chinese native breeds (22 for Luxi, 24 for Jinnan, and 23 for Qinchuan), 3 cross populations (20 for Charolais${\times}$Fuzhou, 18 for Limousin ${\times}$Luxi, and 17 for Simmental${\times}$Jinan) and 1 Taurus pure breed population (16 Angus steers). In the current study, 15 SNP were discovered in intron3 and exon4 of DGAT2 at positions 65, 128, 178, 210, 241, 255, 270, 312, 328, 334, 365, 366, 371, 415, and 437 (named as their positions in PCR amplified fragments). Only 7 of them (128, 178, 241, 270, 312, 328, and 371) were analyzed, because SNP in three groups (65-128-255, 178-210-365 and 241-334-366) were in complete linkage disequilibrium within the group, and SNP 415 was a deletion and 437 was a null mutation. Frequencies for rare alleles in the 3 native breed populations were higher than in the 3 cross populations for 178 (p = 0.04), 270 (p = 0.001), 312 (p = 0.03) and 371 (p = 0.002). A general linear model was used to evaluate the associations between either SNP genotypes or allele substitutions and the measured traits. Results showed that SNP 270 had a significant association with the fat yield associated with kidney, pelvic cavity, heart, intestine, and stomach (KPHISY). Animals with genotype CC and CT for 270 had less (CC: -7.71${\pm}$3.3 kg and CT: -5.34${\pm}$2.5 kg) KPHISY than animals with genotype TT (p = 0.02). Allele C for 270 was associated with an increase of -4.26${\pm}$1.52 kg KPHISY (p = 0.006) and $-0.92{\pm}0.45%$ of retail cuts weight percentage (NMP, Retail cuts weight/slaughter body weight) (p = 0.045); allele G for 312 was associated with an increase of -5.45${\pm}$2.41 kg KPHISY (p = 0.026). An initial conclusion was that associations do exist between DGAT2 gene and carcass fat traits. Because of the small sample size of this study, it is proposed that further effort is required to validate these findings in larger populations.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.2
• /
• pp.209-216
• /
• 2019

Objective: We compare the effects of three different approved sources of supplemental zilpaterol on growth-performance responses and carcass characteristics of finishing lambs. Methods: Twenty four Pelibuey${\times}$Katahdin lambs ($46.75{\pm}2.43kg$) were used in a 33-day feeding trial. Lambs were fed a dry rolled corn-based finishing diet. Treatments consisted of the non-supplemental basal diet (Control) versus the basal diet supplemented with 125 mg zilpaterol/kg of diet (as fed basis) from three commercial sources marketed in Mexico: Zilmax (ZIL), Grofactor, and Zipamix. Results: Compared to controls, zilpaterol (ZH) supplementation did not affect dry matter intake (DMI), but increased carcass adjusted daily weight gain (ADG, 36.7%), gain efficiency (34.2%), and dietary net energy (26.0%), and decreased (23.4%) the ratio of observed:expected DMI. Compared to controls, supplemental ZH increased hot carcass weight (6.4%), dressing percentage (3.2%), m. longissimus thoracis (LM) area (15.6%), and shoulder muscle:fat ratio (28.7%), but decreased kidney-pelvic-heart fat, and fat thickness. Supplemental ZH increased 10.9% and 14.3% whole cut weight of loin and leg, respectively, and the proportion (as percentage of cold carcass weight) of leg (4.3%). These increases were reflected in greater forequarter and hindquarter weights. Lambs fed ZH increased (4.6%) empty body weight (EBW) and reduced (14.7%) liver/spleen weight (as g/kg EBW). Likewise, ZH supplementation tended (p = 0.08) to lower (8.9%) visceral fat. Growth performance, energetic efficiency, hot carcass weight, dressing percentage, LM area and whole cuts were not different across supplemental ZH sources. However, compared with non-supplemented controls, only ZIL appreciably decreased carcass fat distribution, including fat thickness, percentage kidney pelvic and heart fat, shoulder fat, and visceral fat. Conclusion: Supplemental ZH increases ADG, gain efficiency, carcass dressing percentage, and LM area. The magnitude of these responses was similar among ZH sources. Nevertheless, compared with non-supplemented controls, only ZIL appreciably decreases carcass fat. The basis for this is uncertain, but indicative that some practical differences in zilpaterol bio-equivalency may exist across commercial sources tested.