• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.480.2-480.2
• /
• 2014

Electrochemical capacitors have been the most strong energy storage devices due to high power density and long cycle stability. Pristine carbon nanotubes are promising electrode materials for excellent electrical conductivity and high specific surface area in electrochemical capacitor. However, the practical application of pristine carbon nanotubes was limited by the aggregation into bundles due to van der Waals force. In this research, we explained how multi-walled carbon nanotubes (MWCNT) functionalized by carboxyl, sulfonic, and amine groups (CNT-COOH, CNT-SO3H, CNT-NH2) to improve the performances of MWCNT. Functionalized CNTs showed two- to four-fold increase in capacitance over that of pristine CNTs, while maintaining reasonable cyclic stability. But, the CNT-COOH showed the lowest rate capability of 57% compared to 84%, 86% of CNT-SO3H and CNT-NH2. As demonstrated by the spectroscopic analysis, This reseach showed how surface functional group of carbon nanotubes change capacitor performances.

• Journal of Surface Science and Engineering
• /
• v.29 no.6
• /
• pp.851-856
• /
• 1996

Copper Phthalocyanine (CuPc) thin films were fabricated on the silicon wafers by plasma activated evaporation method and structural analysis were carried out with various spectroscopies. The CuPc films had dense and smooth morphology and they also showed good mechanical properties and chemical resistance. The main molecular structure of the CuPc, which is the conjugated aromatic heterocyclic ring structure, was maintained even in the plasma process. However, metal-ligand (Cu-N) bands were deformed by the plasma process and the structure became amorphous especially at higher process pressures. Oxygen impurities were incorporated in the film and carboxyl functional groups were formed at the peripheral benzene ring. The structure and morphology of the films were dependent on the process pressure but relatively irrespective of the RF power.

• Mass Spectrometry Letters
• /
• v.11 no.1
• /
• pp.6-9
• /
• 2020

Matrix-assisted laser desorption/ionization-mass spectrometry (MALDI-MS) analysis of ionic liquid matrices (ILMs) prepared using pyridine and dihydroxybenzoic acid (DHB), such as 2,3-DHB and 2,5-DHB, displayed an unconventional peak at m/z 232.0, which was regarded as [DHB+pyridine-H]⁺. The peak at m/z 232.0 was not observed from other ILMs prepared using other DHB isomers, such as 2,4-DHB, 2,6-DHB, 3,4-DHB, and 3,5-DHB. Two requirements to observe the peak at m/z 232.0 in a DHB/pyridine ILM are suggested. First, carboxyl and hydroxyl groups must be located ortho to each other. Second, the secondary hydroxyl group must be located at a carbon with a high electron density. Based on these two requirements, a potential mechanism for the generation of the peak at m/z 232.0 is suggested.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.215-215
• /
• 2011

The bonding configuration and adsorption stability of alanine and leucine adsorbed on Ge(100)-2${\times}$1 surface were investigated and compared using core-level photoemission spectroscopy (CLPES) and density functional theory (DFT) calculations. The bonding configuration, stability, and adsorption energies were evaluated for two different coverage levels. In both cases, the C 1s, N 1s, and O 1s core-level spectra at a low coverage (0.30 ML) indicated that the carboxyl and amine groups participated in bonding with the Ge(100) surface in an "O-H dissociated-N dative bonded structure". At high coverage levels (0.60 ML), both this structure and an "O-H dissociation bonded structure" were present. As a result, we found that alanine adsorbs more easily (lower adsorption energy) than leucine on Ge(100) surfaces due to less steric hindrance of side chain.

• Journal of Pharmaceutical Investigation
• /
• v.26 no.3
• /
• pp.155-168
• /
• 1996

The active site of cyclooxygenase was modeled by complementary receptor-cavity mapping procedure using 3D structures of the non-steroidal antiinflammatory drugs (NSAIDs). A total of 50 NSAIDs were chosen as data ligands which compete the same site on the enzyme. Partial atomic charges were estimated, and the energetic differences for various conformations were calculated so as to meet the need for a most efficient overlapping of the probably-equivalent functional groups of the ligand molecules. The structure activity relationships of the NSAIDs, if available, were fully considered throughout the modeling. The overall shape of the model obtained is similar to a boot-without-bottom. Most of inner surface of the cavity appeared as hydrophobic; two polar counterparts except the carboxyl-binding position were found. By this model, some clear explanations could be given on the experimental observations which were not satisfiably understood yet.

• Journal of Food Hygiene and Safety
• /
• v.14 no.2
• /
• pp.140-145
• /
• 1999

Analytical method for preservatives in food was developed using gas chromatography/mass spectrometry (GC/MS). Propionic acid, sorbic acid, benzoic acid, ethyl salicylate, ethyl p-hydroxy benzoate, iso-propyl p-hydroxy benzoate, n-propyl p-hydroxy benzoate, iso-butyl p-hydroxy benzoate, n-butyl p-hydroxy benzoate, p-hydroxy benzoic acid and dehydro acetic acid were extracted from cooling beverage with diethyl ether. The polar hydroxyl and carboxyl groups of food preservatives were derivatized with N-methyl-N-tert-butyldimethylisilyl-trifluoroscetamide (MTBSTFA) to form the corresponding tert-bytyldimethyl-silylated derivatives, and submitted to GC/MS analysis. The mass spectra of the derivatives were investigated for the selection of monitoring ions for multi-residue analysis of 11 preservatives by GC/MS. The macro program was also developed for the qualitative analysis of these preservatives in food.

• Macromolecular Research
• /
• v.10 no.3
• /
• pp.168-173
• /
• 2002

Unstabilized low-density polyethylene (LDPE) films and films formulated with hindered amine light stabilizer (HALS) were exposed to UV-radiation; and the physicochemical changes during photooxidation processes have been investigated using tensile, FTIR spectre-photometric and thermal analytical (DSC) techniques. The dependence of tensile properties (elongation- and stress-at-break), carboxyl index and heat of fusion on UV-irradiation time have been discussed. The use of HALS is found to be effective in maintaining the UV-mechanical properties of the LDPE films. The experimental results showed that there exists no correlation between mechanical properties and carbonyl index, whereas crystallinity correlates well with carbonyl index in unstabilized and stabilized films for irradiation times greater than 100 h. The rate of formation of carbonyl groups is found to be dependent on UV exposure time. Crystallinity of the film samples is strongly influenced by both exposure time and presence of HALS.

• Journal of Biomedical Engineering Research
• /
• v.10 no.1
• /
• pp.43-52
• /
• 1989

We modified polymer surfaces, polyethylene, polystyrene and polyester, to improve cellcompatibility. For surface modification of the polymers, we used various surface treatment methods; physicochemical oxidation methods such as plasma discharge, corona discharge, sulfuric acid and chloric acid treatments, and biological methods such as adsorption of plasma protein and fibronectin onto the polymer surfaces. The treated polymer surfaces were characterized by electron spectroscopy for chemical analysis ( ESCA ). The physicochemically treated polymers showed different surface chemical structures depending on the treated methods. The sulfuric acid-treated surfaces showed greater carboxyl groups than those of plasma- or corona- treated surfaces, while the chloric acid-treated one showed high density of hydroxyl group on the surface. By the biological treatments, the surfaces were uniformly coated with proteins. The fibronectin adsorbed on the surface seems to have unique properties for cell binding.

• Journal of the Korean Home Economics Association
• /
• v.34 no.4
• /
• pp.403-414
• /
• 1996

The softening of the femented vegetables and the fruits was resulted from the degradation of pectin substances, cellulose, hemicellulose by polygalacturonase(PG), pectinesterase(PE), Cx-cellulase, $\beta$-galctosidase. The conversion of insoluble pectin to soluble pectin in cell wall-middle lamella was a major factor in the changes of firmness. Ca2+ was substantially increased firmness. However, Ca2+ could be removed from cell wall by chelating agents such as oxalic acid and citric acid. And Ca2+ was replaced with Na+ by ion exchange reaction. Ca2+ deficient tissue was vulnerable to attack by PG. Preheating treatment and Ca2+ addition is most effective in inhibiting the vegetable food softening and in increasing middle lamella-cell wall regidity, which PE activation by preheating treatment and Ca2+ addition could created more anionic carboxyl groups for cationic materials binding such as Ca2+ and chitosan and for polypectategel formation. Excessive demethylation by PE was associated with loosening of middle lamella cell wall components and softening.

• Archives of Pharmacal Research
• /
• v.19 no.1
• /
• pp.66-70
• /
• 1996

Aliphatic esters of protocatechuic acid (PA, 1), vanillic acid (VA, 9) and gallic acid (GA, 18) were prepared and their anti-thrombotic effects were evaluated in the mouse model of thrombosis. The aliphatic groups included methyl, ethyl, n-propyl, i-propyl, n-butyl, i-butyl, n-amyl and cyclohexyl. n-Amyl ester of PA (7), i-propyl and cyclohexyl esters of VA (13 and 17 respectively) and ethyl ester of GA (20) treatment significantly lowered the death rate and increased the recovery from paralysis due to the thrombotic challenge. From the limited analogs available, it was tentatively concluded that the structural conformation, where carboxy oxygen (=O or -O) of the carboxyl group (COOH) at $C_1$ and the oxygen function at $C_3(either\; OH\; or\; OCH_3)$ are closely situated, is favorable for the esters of PA, VA and GA to be more antithrombotic.