• Journal of the Korean Magnetic Resonance Society
• /
• v.3 no.1
• /
• pp.52-59
• /
• 1999

Authors synthesized common intermediates which are applicable for potential antibiotics. Their complete 13C and 1H NMR chemical shift data as well as carbon-and proton-fluorine coupling constants are reported. The knowledge of proton and carbon-fluorine coupling constants may help one assign the NMR data of the fluorinated quinolone derivatives. These results agree with the data published previously.

• Carbon letters
• /
• v.16 no.1
• /
• pp.34-40
• /
• 2015

In this study, in order to improve the thermal and electrical properties of epoxy/graphene nanoplatelets (GNPs), surface modifications of GNPs are conducted using silane coupling agents. Three silane coupling agents, i.e. 2-(3,4-epoxycyclohexyl)-ethyltrimethoxysilane (ETMOS), 3-glycidoxypropyltriethoxysilane (GPTS), and 3-glycidoxypropyltrimethoxysilane (GPTMS), were used. Among theses, GPTMS exhibits the best modification performance for fabricating GNP-incorporated epoxy composites. The effect of the silanization is evaluated using transmission electron microscopy (TEM), scanning electron microscopy, thermogravimetric analysis, and energy dispersive X-ray spectroscopy. The electrical and thermal conductivities are characterized. The epoxy/silanized GNPs exhibits higher thermal and electrical properties than the epoxy/raw GNPs due to the improved dispersion state of the GNPs in the epoxy matrix. The TEM microphotographs and Turbiscan data demonstrate that the silane molecules grafted onto the GNP surface improve the GNP dispersion in the epoxy.

• Journal of the Korean Society of Industry Convergence
• /
• v.7 no.1
• /
• pp.107-113
• /
• 2004

Several transition metal complexes, [$M(L)X_2$](M=Pd(II), Ni(II); X=CI, Br) are prepared with aminophosphine ligands such as 1,2-bis{(diphenylphosphino)amino}ethane{$Ph_2PNHCH_2CH_2NHPPh_2$}($L_1$), 1,2-bis{(diphenylphosphino)amino}propane{$Ph_2PNHCH(CH_3)CH_2NHPPh_2$}($L_2$), trans-1,2-bis{(diphenylphosphino)amino}cyclohexane{$Ph_2PNHC_6H_{10}NHPPh_2$}($L_3$) and 1,2-bis{(diphenylphosphino)amino}benzene{$Ph_2PNHC_6H_4NHPPh_2$}($L_4$). The properties of these complexes are characterized by optical spectroscopic methods including UV/vis spectroscopy, CD, IR, $^1H$- and $^{31}P-NMR$ together with conductometer and elemental analysis. All complexes are stable under atmospheric environment. Catalytic reactivity for C-C coupling between [$M(L)X_2$] and Grignard reagents(RMgX; R=phenyl, propyl, buthyl) by thermolysis were investigated utilizing GC/mass, $^1H$- and $^{13}C-NMR$. When mol scale is 1:20 at [$Pd(L)Cl_2$] and Grignard reagents, the high catalytic activity for C-C coupling is apparent. The [$M(L)X_2$](X=Cl, Br) complexes which have strong bond at M-P exhibit high yields for C-C coupling reactions. When the central metal ion is Pd(II), the high catalytic activity for C-C coupling is apparent. The complex coordinated with Br shows higher catalytic activity for C-C coupling reactions compared to Cl.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2002.10a
• /
• pp.74.2-74
• /
• 2002

• Macromolecular Research
• /
• v.15 no.6
• /
• pp.498-505
• /
• 2007

This study demonstrated the in-situ functionalization with polymers of multi-walled carbon nanotubes (MWNTs) via emulsion polymerization. Polystyrene-functionalized MWNTs were prepared in an aqueous solution containing styrene monomer, non-ionic surfactant and a cationic coupling agent ([2-(methacryloyloxy)ethyl]trime-thylammonium chloride (MATMAC)). This process produced an interesting morphology in which the MWNTs, consisting of bead-string shapes or MWNTs embedded in the beads, when polymer beads were sufficiently large, produced nanohybrid material. This morphology was attributed to the interaction between the cationic coupling agent and the nanotube surface which induced polymerization within the hemimicellar or hemicylindrical structures of surfactant micelles on the surface of the nanotubes. In a solution containing MATMAC alone without surfactant, carbon nanotubes (CNTs) were not well-dispersed, and in a solution containing only surfactant without MATMAC, polymeric beads were synthesized in isolation from CNTs and continued to exist separately. The incorporation of MATMAC and surfactant together enabled large amounts of CNTs (> 0.05 wt%) to be well-dispersed in water and very effectively encapsulated by polymer chains. This method could be applied to other well-dispersed CNT solutions containing amphiphilic molecules, regardless of the type (i.e., anionic, cationic or nonionic). In this way, the solubility and dispersion of nanotubes could be increased in a solvent or polymer matrix. By enhancing the interfacial adhesion, this method might also contribute to the improved dispersion of nanotubes in a polymer matrix and thus the creation of superior polymer nanocomposites.

• Advances in Energy Research
• /
• v.6 no.1
• /
• pp.75-90
• /
• 2019

Anthropogenic greenhouse gas emissions are rising rapidly despite efforts to curb release of such gases. One long term potential solution to offset these destructive emissions is the capture and storage of carbon dioxide. Partially depleted hydrocarbon reservoirs are attractive targets for permanent carbon dioxide disposal due to proven storage capacity and seal integrity, existing infrastructure. Optimum well completion design in depleted reservoirs requires understanding of prominent geomechanics issues with regard to rock-fluid interaction effects. Geomechanics plays a crucial role in the selection, design and operation of a storage facility and can improve the engineering performance, maintain safety and minimize environmental impact. In this paper, an integrated geomechanics workflow to evaluate reservoir caprock integrity is presented. This method integrates a reservoir simulation that typically computes variation in the reservoir pressure and temperature with geomechanical simulation which calculates variation in stresses. Coupling between these simulation modules is performed iteratively which in each simulation cycle, time dependent reservoir pressure and temperature obtained from three dimensional compositional reservoir models in ECLIPSE were transferred into finite element reservoir geomechanical models in ABAQUS and new porosity and permeability are obtained using volumetric strains for the next analysis step. Finally, efficiency of this approach is demonstrated through a case study of oil production and subsequent carbon storage in an oil reservoir. The methodology and overall workflow presented in this paper are expected to assist engineers with geomechanical assessments for reservoir optimum production and gas injection design for both natural gas and carbon dioxide storage in depleted reservoirs.

• Corrosion Science and Technology
• /
• v.9 no.1
• /
• pp.39-47
• /
• 2010

Galvanic coupling between GECM(graphite epoxy composite material) and metallic materials can facilitate corrosion of metals and alloys because GECM is noble and electrically conductive. Galvanic corrosion is affected by many factors including metallic materials, area ratio, surface condition, and corrosivity. This work aims to evaluate the effect of area ratio on galvanic corrosion between GECM and several metals. In the case of glavanic coupling of carbon steel and Al to GECM, corrosion rate increased with increasing area ratio. Corrosion rate of sensitized STS 316S stainless steel decreased a little at an area ratio 1:1 but increased at an area ratio 30:1. It is considered to be due to that area ratio affects galvanic corrosion more in less corrosion resistant alloys. However, in case of STS 316 and Ti, galvanic coupling reduces corrosion rate by the formation of passive film.

• Steel and Composite Structures
• /
• v.17 no.2
• /
• pp.185-198
• /
• 2014

Carbon-manganese steel A42 (French standards) is used in steam generator pipes of nuclear center and subject to low cycle fatigue (LCF) loads. In order to obtain the material LCF behavior, the tests are implemented in a hydraulic fatigue machine. The LCF plastic deformation and cyclic stress in macroscope have been influenced by the accumulated low cycle fatigue damage. The constitutive kinematic and isotropic hardening modeling is modified with coupling fatigue damage to describe the fatigue behavior. The improved model seems to be good agreement with the test results.

• Journal of the Korean Ceramic Society
• /
• v.38 no.7
• /
• pp.608-614
• /
• 2001

수지결합질 탄소재의 사출성형시 중요한 요소는 열유변학적 거동이다. 수지결합질 탄소재의 열유변성, 기계적 물성은 충진제(흑연)의 표면상태에 영향을 받는다. Coupling 처리에 의한 충진제의 표면개질은 binder와의 젖음성과 호환성 등에 영향을 미쳐 수지결합질 탄소재의 특성을 향상시킨다. 본 연구에서는 충진제의 표면개질을 위해 실란 coupling 처리하였다. 충진제의 표면에 코팅된 실라놀은 FT-IR과 침수거동 관찰결과 충진제 표면에 단층으로 코팅되었음을 보였다. Coupling 처리는 충진제 표면에 활성을 가함으로써 수지결합질 탄소재의 열유변학적 거동과 기계적 물성에 기여하였다.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.6
• /
• pp.1221-1228
• /
• 2005

Carbon electrode was applied to a wastewater treatment system as biofilm media. The spatial distribution of heterotrophic bacteria in aerobic wastewater biofilm grown on carbon electrode was investigated by scanning electron microscopy, atomic force microscopy, and biomass measurement. Five volts of electric oxidation and reduction potential were charged to the carbon anode and cathode of the bioelectrochemical system, respectively, but were not charged to electrodes of a conventional system. To correlate the biofilm architecture of bacterial populations with their activity, the bacterial treatment efficiency of organic carbons was measured in the bioelectrochemical system and compared with that in the conventional system. In the SEM image, the biofilm on the anodic medium of the bioelectrochemical system looked intact and active; however, that on the carbon medium of the conventional system appeared to be shrinking or damaging. In the AFM image, the thickness of biofilm formed on the carbon medium was about two times of those on the anodic medium. The bacterial treatment efficiency of organic carbons in the bioelectrochemical system was about 1.5 times higher than that in the conventional system. Some denitrifying bacteria can metabolically oxidize $H_{2}$, coupled to reduction of $NO_{3}^{-}\;to\;N_{2}$. $H_{2}$ was produced from the cathode in the bioelectrochemical system by electrolysis of water but was not so in the conventional system. The denitrification efficiency was less than $22\%$ in the conventional system and more than $77\%$ in the bioelectrochemical system. From these results, we found that the electrochemical coupling reactions between aerobic and anaerobic reactors may be a useful tool for improvement of wastewater treatment and denitrification efficiency, without special manipulations such as bacterial growth condition control, C/N ratio (the ratio of carbon to nitrogen) control, MLSS returning, or biofilm refreshing.