• Bulletin of the Korean Chemical Society
• /
• 제9권1호
• /
• pp.30-32
• /
• 1988

Symmetrical diaryl ${\alpha}-diketones$ were synthesized in moderately good yields through the palladium catalyzed reaction of aryl iodides with carbon monoxide. The reaction was tolerant of a wide variety of fuctionalities($OCH_3,\;CH_3,\;NO_2,\;OH,\;COOH$) on the aryl iodide. On the other hand, the similar reaction of aryl bromides or chlorides with carbon monoxide did not proceed.

• Elastomers and Composites
• /
• 제42권2호
• /
• pp.102-106
• /
• 2007

카본블랙, 커플링제가 없는 실리카, 그리고 커플링제를 함유한 실리카 등 다른 충전 시스템을 갖는 SBR 가황물의 수팽윤 거동에 대해 연구하였다. 증류수와 3.5% NaCl 용액을 팽윤 매질로 사용하였다. 증류수에서의 수팽윤비가 소금물에서의 그것보다 높았다. 카본블랙으로 보강된 가황물의 수팽윤비가 실리카로 보강된 것보다 낮았다. 실리카로 보강된 SBR 가황물의 경우, 커플링제가 없는 것이 커플링제를 함유한 것보다 더 큰 수팽윤비를 나타내었다. 1,2-유니트 함량이 다른 SBR 가황물의 수팽윤 거동에 대해서도 비교하였다. 수팽윤비는 1,2-유니트 함량이 증가함에 따라 감소하는 경향을 보였다.

• Macromolecular Research
• /
• 제14권2호
• /
• pp.187-193
• /
• 2006

Organoclay, was applied as a filler, in place of carbon black and silica, to a natural rubber (NR)/butadiene rubber (BR) blend. A compounding method was used to disperse and separate the layered silicates. The effect of a coupling agent on the vulcanizates was evaluated using both the silica and organoclay filled compounds. After the compounding processes were completed, the XRD diffraction peaks disappeared, but then reappeared after vulcanization. The scorch times for the organoclay-filled compounds were very short compared to those for carbon black and silica-filled compounds. The organoclay-filled compounds showed high values of tensile strength, modulus, tear energy, and elongation at the break. When ranked by viscosity, the compounds appeared in the following order: silica > silica (Si-69) > organoclay > organoclay (Si-69) > carbon black. Fractional hysteresis, tensile set, and wear rates were very consistent with the viscosity of the vulcanizates. The Si 69 coupling agent increased reversion resistance, the maximum torque values in the ODR, modulus, and wear resistance, but decreased elongation at the break, fractional hysteresis, and tension set of the vulcanizates.

• 대한화학회지
• /
• 제33권5호
• /
• pp.530-537
• /
• 1989

요오드화 방향족 화합물과 diethylmalonate를 일산화탄소 존재 하에서 팔라듐 촉매를 이용한 CO 첨가 커플링반응으로 다양한 치환체를 지닌 diethylbenzoulmalonate를 비교적 좋은 수득률로 합성하였다. Diethylbenzoylmalonate 유도체의 새로운 합성경로인 팔라듐 촉매를 이용한 CO 첨가 커플링반응은 이가의 팔라듐 촉매, 3 당량의 무기염기 및 극성이 큰 용매를 사용한 경우 가장 잘 진행되었다. 또한, 이 반응을 10기압의 일산화탄소 존재하에서 실시했을 때 diethylbenzoylmalonate 유도체의 수득률은 상압에 비하여 증가하였다.

• Corrosion Science and Technology
• /
• 제4권3호
• /
• pp.75-80
• /
• 2005

This work dealt with the evaluation of galvanic corrosion rate in a corrosion cell having annular gap of 0.5 mm between carbon steel 1018 and alloy 600 as a function of temperature and boron concentration. Temperature and boron concentration were ranged from 110 to 300 $^{\circ}C$ and 2000~10000 ppm, respectively. After the operating temperature of the corrosion cell where the electrolyte was injected was attained at setting temperature, galvanic coupling was made and at the same time galvanic current was measured. The galvanic corrosion rate decreased with time, which was described by corrosion product such as protective film as well as boric acid deposit formed on the carbon steel with time. From the galvanic current obtained as a function of temperature and boron concentration, it was found that the galvanic corrosion rate decreased with temperaturewhilethe corrosionrate increasedwith boronconcentration. The experimental resultsobtained from galvanic corrosion measurement were explained by adhesive property of corrosion product such as protective film, boric acid deposit formed on the carbon steel wall and dehydration of boric acid to be slightlysolubleboric acid phase.Moreoverthe galvaniccorrosionrate calculatedusing initialgalvaniccoupling current instead of steady state coupling current was remarked, which could give us relatively closer galvanic corrosion rate to real pressurized water reactor.

• Macromolecular Research
• /
• 제10권1호
• /
• pp.24-33
• /
• 2002

Interfacial and microfailure properties of carbon fiber/epoxy composites were evaluated using both tensile fragmentation and compressive Broutman tests. A monomeric and two polymeric coupling agents were applied via the electrodeposition (ED) and the dipping applications. A monomeric and a polymeric coupling agent showed significant and comparable improvements in interfacial shear strength (IFSS) compared to the untreated case under both tensile and compressive tests. Typical microfailure modes including cone-shaped fiber break, matrix cracking, and partial interlayer failure were observed under tension, whereas the diagonal slipped failure at both ends of the fractured fiber appeared under compression. Adsorption and shear displacement mechanisms at the interface were described in terms of electrical attraction and primary and secondary bonding forces.

• Composites Research
• /
• 제13권4호
• /
• pp.54-66
• /
• 2000

탄소섬유/에폭시 복합재료의 계면 및 미세파괴 물성을 인장 fragmentation과 압축 Broutman 두 시험법과 음향방출 시험을 이용하여 평가하였다. Maleic anhydride polymeric coupling agent와 amino-silane를 각각 전기증착법 및 dipping을 통하여 섬유표면에 적용하였다. 두 coupling agents를 사용한 섬유와 기지간의 계면전단강도는 인장 및 압축 두 시험에서 모두 미처리와 비교하여 큰 증가를 나타내었다. 인장시험 동안에, 원추모양의 섬유파단과 기지의 cracking 그리고 부분적인 interlayer failure로 이루어진 전형적인 미세파괴 형태가 발생하였다. 이에 비하여, 압축시험에서는 부러진 섬유의 끝에서 대각선 방향이 슬립거동이 관찰되었다. 주어진 두 힘의 하중상태에서 섬유의 파단은 항복점 전후 부근에서 일어났다. 음향방출분포는 인장에서 섬유표면 처리와 미처리의 두 조건에서 미세파괴 신호가 잘 분리되었으며, 한편, 압축에서는 signal이 다소 중복되어 나타났다. 이는 탄소섬유의 인장력/압축력 간의 파괴에너지 차이에 기인한다고 고려된다. 탄소와 basalt 섬유복합재료의 섬유파단 waveform의 최대 voltage는 압축보다 인장시험에서 상당히 크게 나타났으며, 이들은 음향방출시험으로 파괴에너지 차이를 명확히 비교 및 확인할 수 있었다.

• Carbon letters
• /
• 제24권
• /
• pp.18-27
• /
• 2017

Multiwall carbon nanotubes (MWCNT) with two different (L/D) aspect ratios ($7{\pm}2{\mu}m/140{\pm}30nm$ and $0.5-2{\mu}m/8-15nm$) were surface treated using nitric acid ($HNO_3$) and polyethyleneimine (PEI) prior to their deposition on carbon fibers (CF). Before the hierarchical reinforcement with CF-MWCNT, the CFs were treated with 3-glycidoxypropyltrime-thoxysilane, a coupling agent (Z6040) and with poly(amidoamine) (PAMAM) a dendrimer containing an ethylenediamine core and amine surface groups. The MWCNT were deposited on the CF using two methods, by electrostatic attraction and by chemical reactions. The changes in the CF surface morphology after the MWCNT deposition were analyzed using SEM, which revealed a higher density and uniform coverage for the PAMAM-treated CF and the short MWCNTs. The interfacial adhesion of the composite materials was evaluated using the single fiber fragmentation technique. The results indicated an improvement in the interfacial shear strength with the addition of the short-MWCNTs treated with acid solutions and grafted onto the surface of the CF fiber using electrostatic attraction.

• Bulletin of the Korean Chemical Society
• /
• 제34권4호
• /
• pp.1137-1144
• /
• 2013

$TiO_2$ composites with seven different carbon materials (activated carbons, graphite, carbon fibers, single-walled carbon nanotubes, multi-walled carbon nanotubes, graphene oxides, and reduced graphene oxides) that are virgin or treated with nitric acid are prepared through an evaporation method. The photocatalytic activities of the as-prepared samples are evaluated in terms of $H_2$ production from aqueous methanol solution (photo-catalytic reduction: PCR) and degradation of aqueous pollutants (phenol, methylene blue, and rhodamine B) (photocatalytic oxidation: PCO) under AM 1.5-light irradiation. Despite varying effects depending on the kinds of carbon materials and their surface treatment, composites typically show enhanced PCR activity with maximum 50 times higher $H_2$ production as compared to bare $TiO_2$. Conversely, the carbon-induced synergy effects on PCO activities are insignificant for all three substrates. Colorimetric quantification of hydroxyl radicals supports the absence of carbon effects. However, platinum deposition on the binary composites displays the enhanced effect on both PCR and PCO reactions. These differing effects of carbon materials on PCR and PCO reactions of $TiO_2$ are discussed in terms of physicochemical properties of carbon materials, coupling states of $TiO_2$/carbon composites, interfacial charge transfers. Various surface characterizations of composites (UV-Vis diffuse reflectance, SEM, FTIR, surface area, electrical conductivity, and photoluminescence) are performed to gain insight on their photocatalytic redox behaviors.

• Elastomers and Composites
• /
• 제46권3호
• /
• pp.237-244
• /
• 2011

비보강, 카본블랙, 카본블랙과 실란커플링제, 실리카, 실리카와 실란커플링제 등 5가지의 다른 충전 시스템을 갖는 NR 복합체를 열노화시켰으며, 가속 열노화에 의한 가교밀도 변화를 연구하였다. 가교밀도는 충전 시스템과 관계없이 노화 시간이 경과함에 따라 증가하였다. 노화 온도가 높아질수록 가교밀도는 눈에 띄게 변하였다. 카본블랙으 로 보강된 NR 복합체의 경우, 실란커플링제는 가교밀도를 증가시켰다. 하지만 실리카로 보강된 NR 복합체의 경우에는 $60^{\circ}C$와 $70^{\circ}C$ 노화에서는 가교밀도 증가분이 감소하였으며, $80^{\circ}C$와 $90^{\circ}C$에서는 거의 영향을 주지 않았다. 카본블랙으로 보강된 NR 복합체의 가교밀도 변화에 대한 활성화 에너지는 로그 함수 형태로 지속적으로 증가한 반면, 실리카로 보강된 NR 복합체의 경우에는 노화 시간 30-150일 구간에서는 거의 변화가 없었다. 비보강 시험편의 활성화 에너지 는 노화 시간에 따라 지수 함수 형태로 증가하였다. 실험 결과는 실란커플링제로부터의 황 제공, 실란커플링제에 의한 충전제의 표면 개질, 실리카 표면에서의 가교제 잔류물의 흡착, 그리고 흡착된 가교제 잔류물의 방출 등으로 설명하였다.