• 한국가스학회지
• /
• 제21권6호
• /
• pp.1-7
• /
• 2017

본 연구는 천연가스를 기반으로 하는 가스연료 자동차의 연비산출방법에 대해 미국과 유럽의 기준을 조사하고 적합성을 분석하여 국내에 적합한 자동차 연비 산출방법을 도출하는데 목적이 있다. 탄소평형법으로 유도되는 연료소비율 산출은 연료의 탄소중량비와 자동차 배출가스중 탄소성분의 평형 관계식에 의해 유도된다. 미국기준은 시험가스 조성의 제한이 없지만 유럽 기준은 기준 시험가스(G20, G23)를 사용하여야 한다. 국내 도시가스를 사용하는 NGV의 경우 유럽기준을 적용하면 시험가스의 차이로 연비가 약 12% 불리하게 나오는 것으로 확인되었다. 또한, 연비 산출시 필요한 연료물성을 발열량으로부터 결정하는 방법을 소개하고 이러한 방법을 기반으로 국내 천연가스 자동차 연비 산출방법을 제시하였다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 춘계학술발표대회 논문집
• /
• pp.250-253
• /
• 2004

Emphasis has been placed on thin plate fabrication of plain woven carbon fabric reinforced Al matrix composites using liquid pressing process. The composite has potential applications for PDP rear plate. The process is to use the low pressure for infiltration of Al melt into plain woven carbon fabric as the Al melt is pressurized directly. The minimum pressure required for the infiltration was calculated from force balance equation, permeability measurements and compaction behavior of carbon fiber. Also, the melting temperature and the holding time have been optimized. In order to measure coefficient of thermal expansion (CTE) of the composites, the thermal strain measurement using strain gage was performed and the thermal conductivity of the composites was measured using laser flash method. The constituent materials of the composite are PAN type carbon fibers as reinforcements and 6061 Al alloys as matrices.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제24권4호
• /
• pp.11-19
• /
• 2019

This paper examines an assessment method for terminating the post-closure maintenance of a landfill using a simplified landfill gas model. The case study site is the Sudokwon Landfill in Incheon city, which was closed in 2000. The deviations of the results obtained by the regular model and the simplified model were both slightly over 10% from the measured data. Also, the deviation of the simplified model from the regular model has been less than 5% since 2005. Thus, the simplified model could be applied to other landfills that have been closed for at least 5 years. Additionally, the results of the mass balance analysis using the simplified landfill gas model indicated that 39% of the organic carbon was discharged, leading to organic carbon and organic matter content of 7.2 and 17.6%, respectively, in the landfill by the end of 2018.

• 한국기계가공학회지
• /
• 제3권4호
• /
• pp.95-100
• /
• 2004

Plastics is used to produce precise parts with an inclusion of a reinforcement material such as glass fiber or carbon fiber to improve the dimension accuracy. The plastic goods can be produced with inaccurate dimensions, low mechanical strength, or residual stress due to the over packing of cavity inside, if the filling balance of melt resin is not accomplished. To overcome this problem, it is necessary to design the runner system with the geometrical balance at the mold design stage. However, even if the balanced runner system is achieved, a severe filling imbalance is observed practically in a multi-cavity mold. In this study, experiments were performed with Taguchi method to achieve the filling balance in multi-cavity mold with a symmetric runner system, by the use of pure PA and PA with glass fiber 33%. The experimental results were investigated to understand the effect of related molding factors on the filling imbalance for two resins.

• 에너지공학
• /
• 제17권4호
• /
• pp.182-188
• /
• 2008

본 연구에서는 탄소 균형 및 1차식에 의한 공연비 산정방법을 대체연료에 적용하여 그 결과를 비교하였다. 이전의 연구에서는 Eltinge 차트의 확장, 미연탄화수소의 보상 및 다양한 방법으로부터 계산한 결과를 비교하였다. 또한 Eltinge 방법은 현재 공연비를 산정하는 방법 중 가장 일반적인 식이라는 것을 확인하였다. 그러나 최근 지구온난화 방지를 포함하여 환경 보호와 에너지보존에 대한 요구가 증가하면서 내연기관에 대체연료를 사용이 도입되기 시작하면서 이러한 대체연료들에 대한 공연비의 정확한 산정이 필요하게 되었다. 특히, 산소를 포함하는 연료에서는 Eltigne방법을 제외하고 모든 공연비 산정법들이 다시 유도되어야한다. 이 연구에서는 이미 그 정확성이 확인된 탄소균형식을 이용하여 대체연료의 공연비를 산정하기 위해 다시 유도하였고, 각 대체 연료에 실제로 적용이 가능한 1차식을 새로이 제시하였다. 평가 결과, 탄소균형식으로 계산한 공연비는 가솔린 연료와 비교하여 다소 오차가 증가하였지만, 그 정확도는 다양한 대체 연료들에 적용하기에 충분하다는 결론을 얻었다. 또한, 제시된 1차식은 $\lambda=1.2$이하에서는 그 정확도가 매우 높았다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.87.2-87.2
• /
• 2010

The steady and dynamic process model for an internal reforming molten carbonate fuel cell power plant is discussed in this paper. The dominant thermal and chemical dynamic processes are modeled for the stack module and balance-of-plant, including cathode gas preparation, heat recovery, heat loss (Each heat loss amount for the stack and MBOP is obtained from real plant data) and fuel processing. Based on dynamic model and control demand, PID controllers are designed in the whole system. By applying these controllers we can obtain temperature balance of stack and control system depending on changing steam to carbon ratio, air feed amount, and transient condition.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.104-107
• /
• 2000

Evaporative heat transfer characteristics of carbon dioxide has been investigated. Experiment has been carried out for seamless stainless steel tube with outer diameter of 9.55 mm and inner diameter of 7.75 mm. Direct heating method is used for supplying heat to the refrigerant was uniformly heated by electric current which was applied to the tube wall. The saturation temperature of refrigerant is calculated from the measured saturation pressure by using an equation of state. Inner wall temperature was calculated from measured outer wall temperature, accounting for heat generation in the tube and heat conduction through the tube wall. Mass Quality of refrigerant was calculated by considering energy balance in the preheater and the test section. Heat fluxes were set at 12, 16, 20, 23, and $27kW/m^2$, mass fluxes were controlled at 212, 318, 424, and $530 kg/m^2s$, and saturation temperature of refrigerant were adjusted at 0, 3.4, 6.7 and $10.5^{\circ}C$. From this study, heat transfer coefficients of carbon dioxide have been provided with respect to quality for several mass fluxes, heat fluxes. Finally, the experimental results in this study are compared with the correaltion by Gungor and Winterton(1987).

• Macromolecular Research
• /
• 제13권6호
• /
• pp.521-528
• /
• 2005

Electrospun polyacrylonitrile (PAN) nanofibers were carbonized with or without iron (III) acetylacetonate to induce catalytic graphitization within the range of 900-1,500$^{circ}C$, resulting in ultrafine carbon fibers with a diameter of about 90-300 nm. Their structural properties and morphologies were investigated. The carbon nanofibers (CNF) prepared without a catalyst showed amorphous structures and very low surface areas of 22-31 $m^{2}$/g. The carbonization in the presence of the catalyst produced graphite nanofibers (GNF). The hydrogen storage capacities of these CNF and GNF materials were evaluated through the gravimetric method using magnetic suspension balance (MSB) at room temperature and 100 bar. The CNFs showed hydrogen storage capacities which increased in the range of 0.16-0.50 wt$\%$ with increasing carbonization temperature. The hydrogen storage capacities of the GNFs with low surface areas of 60-253 $m^{2}$/g were 0.14-1.01 wt$\%$. Micropore and mesopore, as calculated using the nitrogen gas adsorption-desorption isotherms, were not the effective pore for hydrogen storage.

• 융복합기술연구소 논문집
• /
• 제3권2호
• /
• pp.57-60
• /
• 2013

The purpose of this study is to analysis of how to calculate fuel efficiency in major development countries (U.S. and Europe) and energy consumption formular derivation of domestic CNG fuel and prove by vehicle test. The formula of fuel consumption is different in mpg(mile per gallon), l/100km, and km/l each countries. CNG fuel has a significant impact on fuel density, composition, and Hydro-Carbon ratio. So, this study how to measurement and calculation procedures of CNG gaseous fueled vehicle energy consumption rate.

• 한국ITS학회 논문지
• /
• 제14권1호
• /
• pp.94-102
• /
• 2015

고속도로 하이패스 이용률은 59.4%(2013년말 기준)로서 지속적으로 증가하고 있는 추세이다. 본 연구에서는 고속도로 영업소를 이용하는 승용차의 연료소모량을 측정하기 위해서 4개 차종을 대상으로 차대 동력계를 이용한 탄소균형법을 적용하였고, 일반 영업소와 하이패스 영업소의 주행 모드 18개를 설정하여 실험하였다. 그 결과 폐쇄식 구간의 경우 차종에 따라 21.0~56.4ml/veh, 개방식 구간의 경우 10.5~28.1ml/veh의 연료소모 절감효과가 있는 것으로 분석되었다. 또한, 하이패스 이용률에 따른 연간 연료비용 절감효과는 이용률 70%일 경우 282~573억원, 80%일 경우 322~655억원, 90%일 경우 362~737억원, 100%일 경우 403~819억원으로 산정되었다.