• 한국군사과학기술학회지
• /
• 제11권5호
• /
• pp.99-106
• /
• 2008

Metal ions such as Cu and Cr were extracted from the Cu, Cr and Ag impregnated active carbon by contacting the solid surfaces with supercritical carbon dioxide(Sc-$CO_2$) containing chelating agents. About 10g of the active carbon sample were loaded in a vertical tube extractor contacting with $CO_2$ flowing from the bottom of the tube for 6hrs. The ligands used were acetyl acetone(AA) and Cyanex-302(C-302). Water and methanol were used as entrainers to study the effect of co-solvent to $CO_2$. Experimental results showed that C-302 was more effective than AA in removing Cu with the maximum extraction of 42.0wt%, while 57.6wt% of Cr was extracted with AA from the sample.

• KSBB Journal
• /
• 제11권4호
• /
• pp.489-496
• /
• 1996

Carbon paste electrode를 채용함으로써 L-lac tate 측정용의 전기화학식 바이오센서를 성공적으로 개발할 수 있었다. 특히 뛰어난 electrocatalytic activity를 갖는 platinum이 첨가된 platinum-CPE 를 이용하여 낮은 전위에서의 NADH의 전기척 산 화가 가능하였다. Enzyme (lactate dehydrogen­a ase)과 $NAD^+$를 carbon paste형식으로 직접 제조 함으로써 L-lactate 측정을 위한 성공적인 바이요센 서의 개발이 가능하였다. 위와 같은 개발연구를 통 하여 다른 $NAD^+$ -dependent dehydrogenase를 채 용한 바이오센서로의 적용이 기대된다.

• 마이크로전자및패키징학회지
• /
• 제11권1호
• /
• pp.59-64
• /
• 2004

고분자 전해질 연료전지의 성능은 촉매 지지 물질의 특성에 의존한다. 본 연구에서는 백금 촉매의 지지체로서 CNF(carbon nanofibre)와 CNT(carbon nanotube)를 사용하였다. CNF와 CNT는 기상화학증착법과 메카노케미컬 공정에 의해 처리된 촉매를 이용하여 합성되었다. 백금은 고분자 전해질 연료전지의 적용을 위하여 CNF와 CNT로 지지되었다. 그 결과, 65 nm의 직경을 가지는 twisted CNF로 준비된 MEA가 가장 우수한 I-V 특성을 나타내는 것이 확인되었다.

• Journal of Welding and Joining
• /
• 제22권2호
• /
• pp.78-84
• /
• 2004

Effects of manganese and carbon on the HAZ microstructural evolution in 500㎫ grade titanium oxide steels were investigated. Microstructural evolution primarily depends on supercooling. When cooled at 3$^{\circ}C$/s in 0.15%C-1.5%Mn steel, grain boundary and Widmanst tten ferrite formed at 640 and 62$0^{\circ}C$, respectively, followed by competitive formation of acicular ferrite and upper bainite inside of grain at 58$0^{\circ}C$. With an increase of manganese, degree of supercooling increased while critical cooling rate for the formation of gain boundary ferrite decreased. Consequently, the amount of acicular ferrite in HAZ was decreased in 2.0%Mn after initial increase in 1.0 and 1.5%Mn. Therefore, optimum supercooling should be maintained to accelerate acicular ferrite formation in titanium oxide steels. Low carbon steel, 0.11%C-1.5%Mn, showed larger amount of acicular ferrite than higher carbon steel because of effectiveness of diffusionless transformation in low carbon steel.

• 한국응용과학기술학회지
• /
• 제26권3호
• /
• pp.328-334
• /
• 2009

Recently, much interest on mesoporous carbon has been shown in their use for both hydrogen and methane storage and as an electrode material for electric double layer capacitors. The mesoporous active carbons by ion exchange were prepared and physical properties such as specific surface area and pore structure of active carbon were investigated using BET. In this study, active carbons with mesopore fraction of $60{\sim}90%$ were obtained. The Fe/Ca-exchanged active carbons showed a greater mesoporosity compared with Fe-exchanged carbons. The mean mesopore size in active carbons using Ca- and Fe-exchange was about $5.5{\sim}6.0nm$ and was approximately 1nm higher than that of the Fe-exchanged active carbon.

• Carbon letters
• /
• 제16권1호
• /
• pp.11-18
• /
• 2015

The process of oxidizing polyacrylonitrile (PAN)-based carbon fibers converts them into an infusible and non-flammable state prior to carbonization. This represents one of the most important stages in determining the mechanical properties of the final carbon fibers, but the most commonly used methods, such as thermal treatment ($200^{\circ}C$ to $300^{\circ}C$), tend to waste a great deal of process time, money, and energy. There is therefore a need to develop more advanced oxidation methods for PAN precursor fibers. In this review, we assess the viability of electron beam, gamma-ray, ultra-violet, and plasma treatments with a view to advancing these areas of research and their industrial application.

• Carbon letters
• /
• 제5권1호
• /
• pp.6-11
• /
• 2004

In spite of unparalleled combination of essential material properties for brake linings and clutch facings, replacement for asbestos is seriously called for since it is a health hazard. Once asbestos is replaced with other material then composition and properties of brake pad changes. In certain cases hardness of the material may be high enough to affect the rotor material. In this study, hardness of the brake pad has been controlled using suitable reinforcement materials like glass, carbon and Kevlar pulp. Brake pad formulations were made using CNSL (cashew net shell liquid) modified phenolic resin as a binder, graphite or cashew dust as a friction modifier and barium sulphate, talc and wollastonite as fillers. Influence of each component on the hardness value has been studied and a proper formulation has been arrived at to obtain hardness values around 35 on Scleroscopic scale. Friction and wear properties of the respective brake pad materials have been measured on a dynamometer and their performance was evaluated.

• Carbon letters
• /
• 제18권
• /
• pp.11-17
• /
• 2016

Monolithic carbon foams with hierarchical porosity were prepared from polyurethane templates and resol precursors. Mesoporosity was achieved through the use of soft templating with surfactant Pluronic F127, and macroporosity from the polyurethane foams was retained. Conditions to obtain high porosity materials were optimized. The best materials have high specific surface areas (380 and 582 m² g^-1, respectively) and high electrical conductivity, which make them good candidates for supports in sensors. These materials showed an almost linear dependence between the potential and the pH of aqueous solutions.

• 한국기후변화학회지
• /
• 제9권1호
• /
• pp.91-102
• /
• 2018

The Korean government submitted the Intended Nationally Determined Contributions (INDC) to UNFCCC which aims to reduce 37% greenhouse gas emission for the opportunity of developing new energy industry and industry innovation by 2030 compared with Business-As-Usual scenario taking into account its international responsibilities and hosting headquarters of Green Climate Fund (GCF) secretariat. The 37% reduction is composed of 25.7% in the domestic markets and 11.3% in the international carbon markets. To achieve the reduction target in the international carbon market mechanisms, it must use the linkage of international carbon markets and develop new renewable energy technology for CDM and ODA. Finally, it must improve carbon capture storage (CCS) technology and establish domestic CCS institutional systems as soon as possible. And, it must activate CCS information exchange for the international cooperation on UNFCCC movement.

• Bulletin of the Korean Chemical Society
• /
• 제19권9호
• /
• pp.952-956
• /
• 1998

An automated system was developed for the routine preparation of carbon-11 ($^11C$) labeled radiopharmaceuticals, which consisted of three major parts including [$^11C$]methylation of the precursor with [$^11C$] iodomethane ($[^11C]CH_3I)$, purification of the desired product and formulation of the final $^11C$ labeled radiopharmaceutical. The whole system included seven three-way slider valves, eleven solenoid valves, four pneumatic cylinders, a HPLC (High Performance Liquid Chromatography) system and a rotary evaporator. Using this system, we investigated the radiochemical synthesis of L-[$methyl-^11C$]methionine, which is the most widely used amino acid in tumor PET (Positron Emission Tomography) studies. The overall operation took 3035 min including the production of $[^11C]CH_3I$ (10.5 min) and decay-corrected radiochemical yield was 25%. The automated system we described herein can be widely utilized for the preparation of many $^11C$ labeled radiopharinaceuticals and has been shown to be efficient, reliable and easy to operate.