• The Korean Journal of Nuclear Medicine Technology
• /
• v.15 no.1
• /
• pp.86-89
• /
• 2011

Purpose: The KOTRON-13 cyclotron was developed in South Korea and was introduced to regional cyclotron centers to produce short-lifetime medical radioisotopes. However, this cyclotron has limited capacity to produce carbon-11 isotope so far. We herein study how to develop and optimize an effective carbon-11 target system in the KOTRON-13 cyclotron by changing cooling system, combing with fluorine-18 target and evaluating beam currents. Materials and Method: To develop the optimal carbon-11 target and an effective cooling system, we designed the carbon-11 target system by Stopping and Range of Ions in Matter (SRIM) simulation program and considered the cavity pressure during irradiation at target grid. In this investigation, we evaluated the yield of carbon-11 production at different beam currents and the stability of the operation of the KOTRON-13 cyclotron. Results: The production of carbon-11 was enhanced from about 1.700 mCi ($50{\mu}A$) to 2,000 mCi ($60{\mu}A$) on the carbon-11 target which developed by seoul national university bundang hospital (SNUBH) and Samyoung Unitech. Additionally, the cooling condition was showed stable to produce carbon-11 under high beam current. Conclude: The carbon-11 target system of the KOTRON-13 cyclotron was successfully developed and improved carbon-11 production. Consequently, the operation of carbon-11 target system was highly effective and stable compare with other commercial cyclotrons. Our results are believed that this optimal carbon-11 target system will be helpful for the routine carbon-11 production in the KOTRON-13 cyclotron.

• Journal of Radiopharmaceuticals and Molecular Probes
• /
• v.2 no.1
• /
• pp.9-16
• /
• 2016

Carbon-11 is one of the most sensitive and desirable positron emission tomography radio-isotope, which offers the capacity to be incorporated, through a covalent bond, into biologically active molecules without altering their biological properties. Carbon-11 can be obtained from the cyclotron with two different chemical forms: $[^{11}C]CO_2$ and $[^{11}C]CH_4$. [$^{11}C$]Methyl iodide has been widely used as a highly reactive labelling precursor that can be applied to label carbon-11 with biologically active molecules via alkylation of N-, O-, or S-nucleophiles. A more recent and still challenging labeling method is transition metal mediated $^{11}C$-carbonylation. Advances in organic chemistry, radiochemistry and improved automated techniques greatly encourage researchers to develop more carbon-11 labelled radiotracers for molecular imaging studies. This mini-review will introduce a historical track of carbon-11 chemistry combining with examples and its role in near future.

• Journal of Powder Materials
• /
• v.22 no.3
• /
• pp.157-162
• /
• 2015

SKD11(ASTM D2) tool steel is a versatile high-carbon, high-chromium, air-hardening tool steel that is characterized by a relatively high attainable hardness and numerous, large, chromium rich alloy carbide in the microstructure. SKD11 tool steel provides an effective combination of wear resistance and toughness, tool performance, price, and a wide variety of product forms. Adding of CNTs increased the performance of mechanical properties more. 1, 3 vol.% CNTs was dispersed in SKD11 matrix by mechanical alloying. SKD11 carbon nanocomposite powder was sintered by spark plasma sintering process. FE-SEM, HR-TEM and Raman analysis were carried out SKD11 carbon nanocomposites.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.11
• /
• pp.1925-1926
• /
• 2007

• Journal of Powder Materials
• /
• v.20 no.4
• /
• pp.291-296
• /
• 2013

SKD11 (ASTM D2) tool steel is a versatile high-carbon, high-chromium, air-hardening tool steel that is characterized by a relatively high attainable hardness and numerous, large, chromium rich alloy carbide in the microstructure. SKD11 tool steel provides an effective combination of wear resistance and toughness, tool performance, price, and a wide variety of product forms. The CNTs was good additives to improve the mechanical properties of metal. In this study, 1, 3 vol% CNTs was dispersed in SKD11 matrix by mechanical alloying. The SKD11+ CNT hybrid nanocomposites were investigated by FE-SEM, particle size distribution, hardness and wear resistance. The CNT was well dispersed in the SKD11 matrix and the mechanical properties of the composite were improved by CNTs addition. It shows good feasibility as cold work die tool.

• Carbon letters
• /
• v.11 no.1
• /
• pp.41-47
• /
• 2010

• Carbon letters
• /
• v.11 no.4
• /
• pp.304-310
• /
• 2010

To manufacture a carbon/carbon composite the coal tar pitch was used as the matrix precursor and the PAN (polyacrylonitrile)-based carbon fiber was used as the reinforcing material to weave 3-directional preform. For pressure carbonization HIP equipment was used to produce a maximum temperature of $1000^{\circ}C$ and a maximum pressure of 100 MPa. The carbonization was induced by altering the dwell temperature between $250^{\circ}C$ and $420^{\circ}C$, which is an ideal temperature for the moderate growth of the mesophase nucleus that forms within the molten pitch during the pressure carbonization process. The application of high pressure during the carbonization process inhibits the mesophase growth and leads to the formation of spherical carbon particles that are approximately 30 nm in size. Most particles were spherical, but some particles were irregularly shaped. The spread of the carbon particles was larger on the surface of the carbon fiber than in the interior of the matrix pocket.

• Carbon letters
• /
• v.11 no.4
• /
• pp.347-356
• /
• 2010

Recently, the use of thermal conductive polymeric composites is growing up, where the polymers filled with the thermally conductive fillers effectively dissipate heat generated from electronic components. Therefore, the management of heat is directly related to the lifetime of electronic devices. For the purpose of the improvement of thermal conductivity of composites, fillers with excellent thermally conductive behavior are commonly used. Thermally conductive particles filled polymer composites have advantages due to their easy processibility, low cost, and durability to the corrosion. Especially, carbon-based 1-dimensional nanomaterials such as carbon nanotube (CNT) and carbon nanofiber (CNF) have gained much attention for their excellent thermal conductivity, corrosion resistance and low thermal expansion coefficient than the metals. This paper aims to review the research trends in the improvement of thermal conductivity of the carbon-based materials filled polymer composites.

• Journal of the Korean Society of Tobacco Science
• /
• v.19 no.1
• /
• pp.46-50
• /
• 1997

The pH of coconut based activated carbon was changed by treating with NaOH and HNO3 and we have calculated the adsorption amounts of ammonia, hydrogen sulfide and methylmercaptan on the activated carbons using the break-through time which was obtained from break-through curve experiments. As a result of this study, the adsorption amounts of ammonia Has on the activated carbons were 2,6 mg/g, 17.2 mg/g and 31.6 mg/g with the pH 11, pH 7 and pH 3, respectively. These results indicated that the adsorption ability of ammonia on activated carbon was increased with decreasing the pH of activated carbon. Otherwise, in the cases of the adsorption experiment of hydrogen sulfide and methylmercaptan on the activated carbons with different pH. the activated carbon with pH 11 showed higher adsorption capacity than the activated carbons with pH 7 and pH 3. The adsorption amounts of hydrogen sulfide and methylmercaptan were 39.9 mg/g and 178 mg/g with pH 11, respectively. Finally, we analyzed the amount of ammonia delivered from 88 Lights cigarette made of triple filter which contained the activated carbon. The amount of ammonia delivered to smoke from the filter cigarette containing the activated carbon with pH 3 was 45.1${\mu}g$/cig. This value was lower 23.8 % than that from the activated carbon with the pH 11.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.11
• /
• pp.694-697
• /
• 2015

We investigated the characterizations of carbon films fabricated by dual magnetron sputtering under various RF powers for the improvement of physical properties in carbon fiber (CF). All sputtered carbon films exhibited amorphous structure, regardless of RF powers, resulting in uniform and smooth surfaces. The hardness and elastic modulus are increased with the increase of RF power, and the adhesion and friction properties of carbon films were improved with the increase of RF power. In the results, The increase of RF power in the sputtering method improved tribological properties of the carbon films, and these attributes can be expected to improve the physical properties of the carbon fiber reinforcement plastics.