• 제목/요약/키워드: Carbon to Nitrogen Ratio

검색결과 540건 처리시간 0.025초

퇴적물 내 유기물의 초기 속성 작용에 나타난 유기 질소의 선택적 분해 (Preferential Decomposition of Nitrogen during Early Diagenesis of Sedimentary Organic Matter)

  • 한명우;이강현
    • 한국해양학회지:바다
    • /
    • 제6권2호
    • /
    • pp.63-70
    • /
    • 2001
  • 퇴적물과 해수가 충진된 수조에서 배양실험을 수행하여 해수중 용존산소, pH, 암모니아, 질산염, 철 및 망간 농도의 시간에 따른 변화를 측정하였다. 농도변화 자료를 초기속성작용의 화학 반응식에 적용시켜 퇴적물 내 유기물 분해 초기에 나타나는 유기탄소와 유기질소의 분해정도를 파악하였다. 배양실험은 237 hr 동안 진행되었으며 , 각 화학종의 농도변화 양상에 따라 모두 4개의 시간구간으로 나눌 수 있었다($0{\sim}9\;hr,\;9{\sim}45\;hr,\;45{\sim}141\;hr,\;141{\sim}237\;hr$). 각 시간구간의 농도변화로부터 계산된 유기탄소와 유기질소의 C/N비는 각각 6.63, 1.49, 0.81, 0.02로 시간경과에 따라 감소하였다. C/N비의 감소는 유기물분해 초기에 퇴적물중 유기질소가 유기탄소보다 먼저 선택적으로 분해되어 용출됨을 시사한다. 현장에서 채취한 퇴적물 시료와 배양실험 종료 후 수조에서 수거한 퇴적물중 유기탄소 및 유기질소, 공극수중 암모니아 및 유기탄소 등의 농도변화를 상호 비교한 결과도 유기질소의 선택적 분해를 시사하였다.

  • PDF

DLC 합성시 산소, 수소 및 질소 첨가의 효과 (Effects of oxygen, hydrogen and nitrogen addition in the synthesis of diamond-like carbon films)

  • 황민선;이종무
    • 한국진공학회지
    • /
    • 제8권2호
    • /
    • pp.165-171
    • /
    • 1999
  • Diamond-like carbon(DLC) films were synthesized using the rf-plasma CVD technique with the addition of small amounts of nitrogen and oxygen to a gas mixture of $CH_4$ and $H_2$. The gas flow ratio of $CH_4$ to $H_2$ was 2.4:1, and 3% , 13.6% of nitrogen were added to the gas mixture of $CH_4$ and $H_2$ for the deposition of DLC films. The film stress tended to decrease as the nitrogen concentration increased from 3% to 13.6%, probably due to the decrease of the number of the interlink between carbon atoms. The residual stress tended to slightly decrease when 3% of oxygen was added. Scratch tests were performed to investigate the adhesion between the DLC films and the Ti intelayer after pretreating the TiN surface with direct hydrogen plasma. The adhesion was enhanced by adding nitrogen and oxygen to the $CH_4$ and $H_2$ gas mixture. The adhesion for the 3% nitrogen addition was better than that for the 13.6% nitrogen addition. The Vicker's hardness of the DLC films was measured to be 1100Hv.

  • PDF

유기물부하가 낮은 하수의 전달탈질공법에 의한 탈질방안 (The Study on denitrification of low organic loading sewage by pre-denitrification process)

  • 이철승;서종환;김진우
    • 한국환경과학회지
    • /
    • 제13권9호
    • /
    • pp.779-878
    • /
    • 2004
  • This study was conducted to analyze the operating conditions of predenitrification process to improve the treatment efficiency in low organic loading sewage plant in use today, and to investigate the treatment efficiency of pilot plant added night soil as well as the nitrogen removal characteristics of pilot plant added carbon sources. In the operation under the condition of $BOD_{5}$ sludge load 0.03-0.28kg $BOD_{5}$/kg VSS/d and oxic ammoniac nitrogen sludge load 0.02-0.24 $kgNH_{4}^{+}$-N/kg MLVSS/d, nitrification efficiency is higher than 95%. In order to achieve 70% nitrogen removal at the T-N sludge loading 0.06kg T-N/kg VSSㆍd and the SRT 6~11 days, optimum operating factors were revealed to $CODc_{r}$/T-N ratio 9, recycle ratio 2.6, and denitrification volume ratio 0.33. At this time, denitrification capacity was approximately 0.09 kg $NO_{3}^{-}$-N/kg $CODc_{r}$; specific nitrification rate was 3.4mg $NH_{4}^{+}$-N/g MLVSS/hr; and specific denitrification rate was 4.8mg $NO_{3}^{-}$-N/g MLVSS/hr.

Effects of thinning intensity on nutrient concentration and enzyme activity in Larix kaempferi forest soils

  • Kim, Seongjun;Han, Seung Hyun;Li, Guanlin;Yoon, Tae Kyung;Lee, Sang-Tae;Kim, Choonsig;Son, Yowhan
    • Journal of Ecology and Environment
    • /
    • 제40권1호
    • /
    • pp.5-11
    • /
    • 2016
  • Background: As the decomposition of lignocellulosic compounds is a rate-limiting stage in the nutrient mineralization from organic matters, elucidation of the changes in soil enzyme activity can provide insight into the nutrient dynamics and ecosystem functioning. The current study aimed to assess the effect of thinning intensities on soil conditions. Un-thinned control, 20 % thinning, and 30 % thinning treatments were applied to a Larix kaempferi forest, and total carbon and nitrogen, total carbon to total nitrogen ratio, extractable nutrients (inorganic nitrogen, phosphorus, calcium, magnesium, potassium), and enzyme activities (acid phosphatase, ${\beta}$-glucosidase, ${\beta}$-xylosidase, ${\beta}$-glucosaminidase) were investigated. Results: Total carbon and nitrogen concentrations were significantly increased in the 30 % thinning treatment, whereas both the 20 and 30 % thinning treatments did not change total carbon to total nitrogen ratio. Inorganic nitrogen and extractable calcium and magnesium concentrations were significantly increased in the 20 % thinning treatment; however, no significant changes were found for extractable phosphorus and potassium concentrations either in the 20 or the 30 % thinning treatment. However, the applied thinning intensities had no significant influences on acid phosphatase, ${\beta}$-glucosidase, ${\beta}$-xylosidase, and ${\beta}$-glucosaminidase activities. Conclusions: These results indicated that thinning can elevate soil organic matter quantity and nutrient availability, and different thinning intensities may affect extractable soil nutrients inconsistently. The results also demonstrated that such inconsistent patterns in extractable nutrient concentrations after thinning might not be fully explained by the shifts in the enzyme-mediated nutrient mineralization.

질소와 탄소가 복합 첨가된 두 오스테나이트계 Fe-18Cr-10Mn 합금의 연성-취성 천이 거동 (Ductile-to-Brittle Transition Behavior of Two Austenitic Fe-18Cr-10Mn Alloys with the Combined Addition of Nitrogen and Carbon)

  • 이승용;김보영;황병철
    • 열처리공학회지
    • /
    • 제28권1호
    • /
    • pp.1-6
    • /
    • 2015
  • The ductile-to-brittle transition behavior of two austenitic Fe-18Cr-10Mn alloys with the combined addition of nitrogen and carbon was investigated in this study. The alloys exhibited a ductile-to-brittle transition behavior because of unusual brittle fracture at low temperatures unlike conventional austenitic alloys. The alloy with higher carbon content had higher yield and tensile strengths than that with lower carbon content due to the solid solution strengthening effect resulting from carbon addition. However, the increase in carbon content promoted the occurrence of intergranular fracture, and thus deteriorated the impact toughness. In order to develop successfully the austenitic Fe-18Cr-10Mn alloys with the excellent combination of strength and toughness in the future, therefore, more systematic studies are required to find the appropriate amount and ratio of nitrogen and carbon.

Effects of Varying Nutritional and Cultural Conditions on Growth of the Ectomycorrhizal Fungus Pisolithus tinctorius SMF

  • Suh, Hyung-Won;Don L. Crawford
    • Journal of Microbiology and Biotechnology
    • /
    • 제1권2호
    • /
    • pp.121-125
    • /
    • 1991
  • The culture conditions and nutritional requirements for enhanced mycelial growth of the ectomycorrhizal fungus P. tinctorius SMF were determined in flask scale experiments. Optimum culture conditions for growth of P. tinctorius SMF in a further modified Melin-Norkrans broth were as follows; temperature 25~$27^{\circ}C$, agitation 120 rpm, and pH 4.0. P. tinctorius SMF utilized various carbon sources including monosaccharides, disaccharides, and polysaccharides. D-Glucose and mannitol were respectively the first and second most suitable carbon sources for mycelial growth. With D-Glucose as the principal carbon source, supplementation of modified Melin-Norkrans (MMN) broth with Lysine (800 mg/l), Glutamic Acid (500 mg/l), or Proline (50 mg/l) enhanced mycelial yields 63%, 34%, and 22% respectively as compared to growth in medium lacking amino acids. ThiaminㆍHCl+biotin+pyridoxine supplementation also enhanced growth. As compared to mycelial growth in the MMN medium, growth of P. tinctorius SMF was enhanced 120% in MMN broth when the carbon/nitrogen ratio was 25/1 in citrate buffer at pH 4.5, and growth was 50% greater in MMN broth of carbon/nitrogen ratio with a 10/1~20/1 without using the buffer. Standard conditions established for growth of P. tinctorius SMF in MMN broth were 25~$27^{\circ}C$, agitation 120 rpm, buffered to pH 4.0 with citrate, in MMN medium containing 10 g/l D-glucose supplemented with 800 mg/l lysine. In this medium the carbon/nitrogen ratio was 20/1~25/1, and the maximal mycelial yield ($Y_{x/s}$ ) was 0.472 (4.72 mg/ml) after 7 days of incubation, as compared to 0.214 (2.14 mg/ml), when the fungus was grown in standard MMN broth.

  • PDF

살수식 여과조의 질산화작용에 대한 수리학적 부하량과 C/N 비의 영향 (Impacts of the Hydraulic Loading Rate and C/N Ratio on Nitrification in a Trickling Filter with Styrofoam Bead Media in Seawater)

  • 최태건;김병기;박정환
    • 한국수산과학회지
    • /
    • 제52권3호
    • /
    • pp.256-267
    • /
    • 2019
  • Styrofoam beads, which are relatively inexpensive and can provide a large specific surface area, were tested as filter media. Styrofoam beads with a diameter of $3{\pm}0.5mm$ were used; the specific surface area of the beads was $1,034m^2{\cdot}m^{-3}$. Five independent recirculating culture systems were used in the experiment. Each system consisted of one culture tank and three trickling bio-filters. Using the systems, nitrification efficiency was evaluated with respect to hydraulic loading rate (HLR) and carbon/nitrogen (C/N) ratio. The lowest ammonia and nitrogen concentrations were $0.84mg{\cdot}L^{-1}$ and $1.30mg{\cdot}L^{-1}$, respectively, observed at an HLR of $50.9m^3{\cdot}m^{-2}{\cdot}h^{-1}$. Nitrification efficiency in the culture tank was highest at a C/N ratio of 0, with ammonia and nitrite nitrogen concentrations of $0.32mg{\cdot}L^{-1}$ and $0.90mg{\cdot}L^{-1}$, respectively. Ammonia and nitrite nitrogen concentrations in the culture tank abruptly changed at C/N ratios ${\geq}3$.

Variation in leaf functional traits of the Korean maple (Acer pseudosieboldianum) along an elevational gradient in a montane forest in Southern Korea

  • Nam, Ki Jung;Lee, Eun Ju
    • Journal of Ecology and Environment
    • /
    • 제42권4호
    • /
    • pp.278-284
    • /
    • 2018
  • Plant functional traits have been shown to be useful to understand how and why ecosystems and their components vary across environmental heterogeneity or gradients. This study investigated how plant functional (leaf) traits vary according to an elevation-associated environmental gradient. Environmental gradients (mean annual temperature and precipitation) were quantified, and leaf traits (leaf area, specific leaf area, leaf nitrogen, leaf phosphorus, leaf carbon, and leaf C/N ratio) of the understory woody plant species Acer pseudosieboldianum were examined across an elevational gradient ranging from 600 to 1200 m in a Baegunsan Mountain in Gwangyang-si, Jeollanam-do, South Korea. The results showed that mean annual temperature and precipitation decreased and increased along with elevation, respectively. Leaf area of the plant species decreased slightly with increasing elevation, while specific leaf area did not differ significantly. Leaf nutrients (nitrogen, phosphorus, and carbon concentrations) were higher at high elevations, but leaf C/N ratio decreased with elevation.

혼합 산업폐수의 질소제거를 위한 외부 탄소원 투입과 물질수지: 실증실험 (Nitrogen Removal from a mixed Industrial Wastewater using Food-Waste Leachate and Sugar Liquid Waste as External Carbon Sources: Full-Scale Experiment)

  • 이몽학;안조환;이정훈;배우근;심호재
    • 한국물환경학회지
    • /
    • 제28권5호
    • /
    • pp.663-668
    • /
    • 2012
  • The feasibility of enhancing biological nutrient removal from an industrial wastewater was tested with food waste leachate and sugar liquid waste as external carbon sources. Long term influences of adding external carbon sources were investigated to see how the biological nutrient removal process worked in terms of the removal efficiency. The addition of the external carbons led to a significant improvement in the removal efficiency of nutrients: from 49% to approximately 76% for nitrogen and from 64% to around 80% for phosphorus. Approximately, 20% of the removal nitrogen was synthesized into biomass, while the remaining 80% was denitrified. Though the addition of external carbon sources improved nutrient removal, it also increased the waste sludge production substantially. The optimal observed BOD/TN ratio, based on nitrogen removal and sludge production, was around 4.0 in this study.

Estimating soils properties using NIRS to assess amendments in intensive horticultural production

  • Pena, Francisco;Gallardo, Natalia;Campillo, Carmen Del;Garrido, Ana;Cabanas, Victor Fernandez;Delgado, Antonio
    • 한국근적외분광분석학회:학술대회논문집
    • /
    • 한국근적외분광분석학회 2001년도 NIR-2001
    • /
    • pp.1615-1615
    • /
    • 2001
  • During the past ten years, Near Infrared Spectroscopy has been successfully applied to the analysis of a great variety of agriculture products. Previous works (Morra et al., 1991; Salgo et al., 1998) have shown the potential of this technology for soil analysis, estimating different parameters just with one single scan. The main advantages of NIR applications in soils are the speed of response, allowing the increase of the number of samples analysed to define a particular soil, and the instantaneous elaboration of recommendations for fertilization and soil amendment. Another advantage is to avoid the use of chemical reagents at all, being an environmentally safe technique. In this paper, we have studied a set of 129 soil samples selected from representative glasshouse soils from Southern Spain. The samples were dried, milled, and sieved to pass a 2 mm sieve and then analysed for organic carbon, total nitrogen, inorganic nitrogen (nitrate ammonium), hygroscopic humidity, pH and electrical conductivity in the 1:1 extract. NIR spectra of all samples were obtained in reflectance mode using a Foss NIR Systems 6500 spectrophotometer equipped with a spinning module. Calibration equations were developed for seven analytical parameters (ph, Total nitrogen, organic nitrogen, organic carbon, C/N ratio and Electric Conductivity). Preliminary results show good correlation coefficients and standard errors of cross validation in equations obtained for Organic Carbon, Organic Nitrogen, Total Nitrogen and C/N ratio. Calibrations for nitrates and nitrites, ammonia and electric conductivity were not acceptable. Calibration obtained for pH had an acceptable SECV, but the determination coefficient was found very poor probably due to the reduced range in reference values. Since the estimation of Organic Carbon and C/N ratio are acceptable NIIRS could be used as a fast method to assess the necessity of organic amendments in soils from Mediterranean regions where the low level of organic matter in soils constitutes an important agronomic problem. Furthermore, the possibility of a single and fast estimation of Total Nitrogen (tedious determination by modifications of the Kjeldahl procedure) could provide and interesting data to use in the estimation of nitrogen fertilizer rates by means of nitrogen balances.

  • PDF