• 제목/요약/키워드: Carbon to Nitrogen Ratio

검색결과 540건 처리시간 0.026초

1983年 7月 鎭海灣의 海洋化學指數의 水質分布에 관하여 (Vertical Distributions of Chemical Oceanographic Parameters in Jinhae Bay in July, 1983)

  • 양동범;김석현;이광우
    • 한국해양학회지
    • /
    • 제19권1호
    • /
    • pp.89-93
    • /
    • 1984
  • 진해만에서 83년 7월의 장마직후에 수직적 및 수평적 해양화학적 환경을 조사 하였다. 마산만-가덕수도의 종축면상에는 염분이 낮은 내만쪽의 표층수에서 높은 농도의 용존성 질산염, 암모니아, 클로로필 a, 입자성질소, 입자성탄소가 측정 되었다. 입자성 C/N비는 내만쪽에서 낮고, 외만에서 높은 값을 보였다. 이 해역 에서 무기질소와 인의 양은 적조가 발생하기에 충분한 향으로 나타났다.

  • PDF

石油炭化水素醱酵에 있어서의 窒素源의 影響 (Effects of Nitrogen Sources in the Fermentation of Petroleum Hydrocarbon)

  • 박태원;김태영;윤희영
    • 대한화학회지
    • /
    • 제17권3호
    • /
    • pp.224-228
    • /
    • 1973
  • Rhodotorula sp.로 $C_{12}{\sim}C_{14}$의 n-alkane 混合物에서 無機系 窒素源인 窒酸鹽과 암모늄鹽 그리고 有機係 窒素源인 urea들의 그 化學形의 差異에 따라 醱酵時間과 收率面에서 어떻게 影響을 미치는가와 窒酸나트륨으로서 炭素源의 炭素에 對한 窒素의 添加比率의 差異에 따라 미치는 影響 等을 調査해 보았다. 그 結果 最高生長에 達하는데 要하는 時間은 窒酸나트륨과 黃酸암모늄이 各各 40 hrs.와 45hrs인데 比해 urea는 이들보다 훨씬 긴 66hrs.가 걸렸고 收率面에 있어서는 0.1N-NaOH의 消費量으로서 兩無機鹽이 各各 0.36과 0.38ml인데 比해 urea는 0.78ml나 되었다. Medium 中의 窒素對 炭素 比率의 影響은 medium에 加하는 n-alkane 混合物을 1%(vol.)에서 窒酸나트륨으로서 N/C가 0.2일 때가 가장 優秀한 結果를 나타내었고 대개 炭素에 對한 窒素의 比率이 낮을 때보다는 높은 때가 더 좋은 生長效果를 보였다.

  • PDF

2015년 하계 제주 행원리 일대 양식장주변 해수 중 용존유기물 분포와 기원 (Distributions and Sources of Dissolved Organic Matter in Seawaters Surrounding Aqua Farms on the Haengwon-ri in Jeju-Island in Summer 2015)

  • 김정현;김태훈
    • Ocean and Polar Research
    • /
    • 제39권1호
    • /
    • pp.35-43
    • /
    • 2017
  • Concentrations of dissolved organic carbon (DOC), dissolved organic nitrogen (DON), dissolved organic phosphate (DOP), and colored dissolved organic matter (CDOM) were measured in the coastal sea off inland aqua farms in northeastern Jeju Island in summer 2015. The highest concentrations of DOC, DON, and DOP were revealed in the surface water off Hado-ri where the lowest salinity conditions prevailed (31.6). The concentrations of DOC, DON, and DOP in the surface water were lower in the inner stations (SH1-1, 1-2, and 1-3) near the aqua farms of the Haengwon-ri than in the outer stations. The concentrations of DOC, DON, and DOP negatively correlated with salinity. These results indicate that the contribution of dissolved organic matter (DOM) from the aqua farms seems to be not significant. On the other hand, the higher concentrations of DON and DOP in the inner stations of Hado-ri (HD 1-1) seem to be attributed to excrement of migrating birds. The three components of CDOM (T, M, and C peaks) showed no relationship with salinity, perhaps due to various in situ productions by marine organisms and decomposition by ultraviolet radiation. The observed lower C:M ratio, an indicator of terrestrial source, and the higher biological index (BIX) of CDOM in the station off Hado-ri indicate that DOM is produced mainly by biological activity. Based on the higher humification index (HIX) of CDOM and the higher DOC:DON ratio off Haengwon-ri, refractory DOM in the inland aqua farms is likely transported to the coastal sea.

2 L급 수소 직접분사 전기점화 엔진의 워밍업 시 공기과잉률에 따른 질소산화물 배출 및 연료 소모율에 대한 실험적 분석 (Effect of Varying Excessive Air Ratios on Nitrogen Oxides and Fuel Consumption Rate during Warm-up in a 2-L Hydrogen Direct Injection Spark Ignition Engine)

  • 하준;김용래;박철웅;최영;이정우
    • 한국가스학회지
    • /
    • 제27권3호
    • /
    • pp.52-58
    • /
    • 2023
  • 지구 기상이변에 대해 탄소중립의 중요성이 대두됨에 따라 무탄소 연료인 수소의 에너지원으로서의 활용도 역시 증대되고 있다. 일반적으로 수소는 연료전지(FC, Fuel Cell)에 활용되고 있으나, 이는 연소를 기반으로 하는 내연기관(ICE, Internal Combustion Engine)에도 활용될 수 있다. 특히 연료전지만으로 수소 활용 및 인프라 확장이 어려운 때에 이미 생산 측면이나 공급 측면에서 인프라가 기 구축되어 있는 내연기관은 수소 에너지 저변 확대에 큰 도움을 줄 수 있다. 다만 수소를 연소기반으로 활용할 경우 고온에서 공기 중 질소가 산소와 반응하여 유해배기물질인 질소산화물(NOx, Nitrogen Oxides)이 생성될 수 있는 단점은 존재한다. 특히 냉간 (Cold Start) 운전 영역시 포함될 EURO-7 배기규제의 경우 워밍업(Warm-up) 과정에서 발생하는 배기배출물의 저감을 위한 노력도 필요하다. 따라서 본 연구에서는 2 L급 수소 직접분사방식 전기점화 (SI, Spark Ignition) 엔진을 활용하여 냉각수를 상온에서 88 ℃로 워밍업하는 과정에서 질소산화물 및 연료소모율의 변화 특성을 살펴보았다. 특히 수소는 기존의 가솔린, 천연가스, 액화석유가스(LPG, Liquified Petroleum Gas)와 달리 가연범위(Flammable range)가 넓기 때문에 공기과잉률(Excessive air ratio)을 희박하게 조절할 수 있다는 장점이 있다. 이에 본 연구에서는 워밍업하는 과정에 있어서 공기과잉률을 1.6/1.8/2.0으로 변화하여 그 결과를 분석하였다. 본 실험의 결과는 워밍업 시 공기과잉률이 희박해질수록 시간당 질소산화물의 배출이 적고, 열효율도 상대적으로 높으나 최종 온도까지 도달 시간이 길어짐에 따라 누적 배출량 및 연료소모율은 악화될 수도 있음을 시사한다.

탄소원과 질소원의 비가 PHB 발효특성치 수율에 미치는 영향 (Effect of Ratios Carbon Source to Nitrogen Source on the Yields of PHB Fermentation Variables)

  • 백예영;허병기
    • KSBB Journal
    • /
    • 제9권4호
    • /
    • pp.365-371
    • /
    • 1994
  • 포도당의 초기농도 10, 20, 25, 30, 40, $50g/\ell$$NH_4Cl$의 초기농도 0.33, 0.4, 0.5, 1.5, 3, $50g/\ell$ 의 조 합으로 형성된 발효배지를 사용하여 탄소원과 질소 원의 초기 조성비 C/N이 각종 발효 변수의 수율 및 PHB 축적량에 마치는 영향을 규명하여 보았다. 탄소원의 소비량에 대한 균체 수율 $Y_{X/X}$는 C/N비가 증가함에 따라 대단히 완만하게 감소하였으며 C/N비 70 이상에서는 일정한 값 0.35( g cell biomassl g glucose)를 나타내였다. 잔여균체 수율 $Y_{RX/S}$C/N비가 증가하면 감소하며 C/N비 65 이상에서는 일정한 값 0.065( g residual biomassl g glucose)를 나타내였다. 그러나 PHB의 수율 $Y_{PHB/S}$는 C/N비의 증가에 따라 상승하여 C/N비 40 내지 60 사이에서 최대수율 0.35( g PHB/g glucose)를 나타내었다. 균체증가량에 대한 PHB의 생성수율 $Y_{PHB/S}$는 C/N비의 증가에 따라 증가하나 C/N비 70 이상에셔는 일정한 값 0.83( g PHB/g cell mass)을 유지하였다. 또한 잔여균체량에 대한 PHB의 생성수율도 C/N비 의 증가에 따라 증가하였으며 탄소원이 더이상 소모 되지 않는 상태에셔의 건조균체량에 대한 PHB 축 적률은 C/N비에 따라 상승하여 최대값 81%에 도 달하였다. 이 경우에 대한 C/N값은 67 근방이었으 며 이 이상의 C/N비에 대한 PHB의 축적률은 81% 로 일정하였다.

  • PDF

플라즈마 질화처리된 중탄소합금강의 내마모특성에 관한 연구 (Study on the Wear Resistant Characteristics of Medium Carbon Alloy Steel Plasma-Nitrided)

  • 조효석;노용식;신호강;이상윤
    • 열처리공학회지
    • /
    • 제5권4호
    • /
    • pp.215-223
    • /
    • 1992
  • This study has been performed to investigate into some effects of temperature, gas mixing ratio and time on the optical microstructure, hardness and wear characteristics of medium carbon alloy steel treated by plasma nitriding. The results obtained from the experiment are summarized as follows: (1) Optical micrographs of AISI 4140 steel plasma-nitrided by the double stage technique have revealed that the nitrided layer is composed of the compound layer and the diffusion layer. The variation in temperature at the first stage gives effects, on the formation of compound layer and the growth rate is shown to be relatively fast at $460^{\circ}C$. (2) The thickness of compound layer has been found to increase with increasing nitrogen percentage in the gas mixture and the holding time. It is therefore recommended that a shorter holding time and a lower nitrogen percentage are more effective to produce a tougher compound layer and a diffusion layer only. (3) X-ray diffraction analysis for AISI 4140 steel has shown that the compound layer consist of ${\gamma}^{\prime}-Fe_4N$ and ${\alpha}-Fe$ and that tough compound layer diffustion layer only can be obtained by the double stage plasmanitriding process. (4) There is also a tendency that the total hardened layer depth increases with increasing temperature, time and nitrogen percentage in the first stage during the double stage plasma nitriding. (5) The wear resistance of plasma nitrided specimens has been found thobe considerably increased compared to the untreated specimens and the amount of increment has appeared to increase further with increasing nitriding temperature, holding time and notrogen percentage of gas mixture in the first stage treatment.

  • PDF

Impact of Temperature and Alkalinity on Nitrogen Removal in the Start-up Period of Partial Nitrification in a Sequence Batch Reactor

  • Nguyen Van Tuyen;Tran Hung Thuan;Chu Xuan, Quang;Nhat Minh Dang
    • 공업화학
    • /
    • 제34권5호
    • /
    • pp.541-547
    • /
    • 2023
  • The effect of temperature and influent alkalinity/ammonia (K/A) ratio on the start-up of the partial nitrification (PN) process for an activated sludge-based domestic wastewater treatment was studied. Two different sequence batch reactors (SBR) were operated at 26 ℃ and 32 ℃. The relationship between temperature and the concentration of free ammonia (FA) and free acid nitrite (FNA) was investigated. A stable PN process was achieved in the 32 ℃ reactor when the influent ammonium concentration was lower than 150 mg-N/L. In contrast, the PN process in the 26 ℃ reactor had a higher nitrite accumulation rate (NAR) and ammonium removal efficiency (ARE) when the influent ammonia concentration was increased to more than 150 mg-N/L. Then three different ranges of the K/A ratio were applied to an SBR reactor. In the K/A range of 2.48~1.65, the SBR reactor achieved the highest NAR ratio (75.78%). This ratio helps to achieve the appropriate level of alkalinity to maintain a stable pH and provide a sufficient amount of inorganic carbon source for the activity of microorganisms. At the same time, FA and FNA values also reached the threshold to inhibit nitrite-oxidizing bacteria (NOB) without a significant effect on ammonia-oxidizing bacteria (AOB). Results showed that the control of temperature and K/A ratio during the start-up period may be important in establishing a stable and steady PN process for the treatment of domestic wastewater.

낮은 C/N비에서 운영되는 유로변경식 생물여과 공정의 질소 제거 특성 (Nitrogen Removal Characteristics in DynaFlow Biofilter System Using Sewage Wastewater of Low C/N Ratio)

  • 김진식;김규리;강한솔;원인섭;김금용;이상일
    • 대한환경공학회지
    • /
    • 제34권3호
    • /
    • pp.189-194
    • /
    • 2012
  • 본 연구는 유로변경식 3단 BAF를 사용하여, C/N ($TCOD_{cr}$/TKN)비가 낮은 생활하수를 대상으로 질소 처리 효율을 향상시키기 위해 제안되었다. 체류시간 6시간에서의 유로변경 3단 BAF의 효과를 평가하기 위해 실험실 규모로 실시하였다. 유로변경식 3단 BAF 공정이 3단 BAF보다 총 질소 제거효율이 약 7% 높은 것으로 나타났는데, 이것은 유기물을 효율적으로 사용하였기 때문이다. 또한 암모니아성 질소의 제거는 독립적인 호기조에서 질산화만을 수행하였기 때문에 질산화 효율이 안정적이었다. 이것은 본 연구에서 제안한 유로변경식 3단 BAF공정이 유기물 흡착을 이용하여 질소의 제거, 탈질 및 질산화에서 우수한 효율을 보였다.

우분(牛糞)의 유기질비료과(有機質肥料化) 연구(硏究) I. 부숙조건(腐熟條件)에 관(關)한 연구(硏究) (Development of Organic Fertilizer based on Cow dung I. Studies on Fermentation condition)

  • 임동규;신재성
    • 한국토양비료학회지
    • /
    • 제24권2호
    • /
    • pp.130-136
    • /
    • 1991
  • 우분(牛糞)의 부숙(腐熟)을 용이(容易)하게 하기 위하여 우분(牛糞)에 왕겨를 비율별(比率別)로 섞고 수분함량(水分含量), C/N률(率) 및 C/P률(率)에 대(對)한 조건(條件)을 파악(把握)하여 부숙(腐熟)과 후숙시험(後熟試驗)을 실시(實施)하였다. 최종제품(最終製品)으로 오이 유식체(幼植物)을 재배(栽培)하였고, 그 결과(結果)는 다음과 같다. 1 부숙기간중(腐熟期間中) 퇴적내(堆積內) 평균온도(平均溫度)는 속서구(速成區)가 $55{\sim}65^{\circ}C$로 광행구(慣行區) $40{\sim}50^{\circ}C$보다 훨씬 높았으며 2. T-N함량(含量)은 속성구(速成區)가 관행구(慣行區) 보다 낮았으나 T-C함량(含量) 및 C/N률(率)은 높았으며, 속성구(速成區)가 관행구(慣行區)보다 부숙(腐熟)이 훨씬 잘 되었다. 3. 후숙기간중(後熟期間中) 부숙온도(腐熟溫度)와 C/N률(率)은 초기(初期)에 증가(增加)하였다가 그후(後) 감소(減少)하였으며 T-N 및 T-C함량(含量)은 시일(時日)이 경과(經過) 할수록 증가(增加)하였다. 4. 속성제품(速成製品)의 균일도(均一道)(위도분포(粒度分布))는 관행구(慣行區) 보다 약간(若干) 미세(微細) 하였으며 입도(粒度)는 -4.00+1.68mm가 가장 많았다. 5. 오이의 유식물(幼植物)은 속성구(速成區)가 관행구(慣行區) 보다 생육(生育)이 양호(良好)하였다.

  • PDF

병류흐름의 중공사 분리막에 의한 이산화탄소 분리 수치 해석 (Numerical Analysis for Separation of Carbon Dioxide by Hollow Fiber Membrane with Cocurrent Flow)

  • 이용택;송인호;안효성;이영진;전현수;김정훈;이수복
    • 멤브레인
    • /
    • 제16권3호
    • /
    • pp.204-212
    • /
    • 2006
  • 이산화탄소에 대한 가소화 안정성 및 이산화탄소/질소의 분리특성이 탁월한 폴리이서술폰(PES)중공사 분리막에 의한 이산화탄소 분리특성을 수치해석으로 알아보고자 하였다. 공정변수에 따른 이산화탄소 분리 거동을 예측하기 위하여 공급 기체와 투과기체가 같은 방향으로 흐르는 병류 흐름에 대한 분리막 공정 지배 방정식을 5차 Runge-Kutta-Verner 방법을 사용하여 Compaq Visual Fortran 6.6 소프트웨어를 이용 공정모사 프로그램을 개발하였다. 개발된 프로그램을 사용하여 수치해석을 수행한 결과, 이산화탄소 투과특성에 영향을 주는 가장 중요한 인자로서 공급 이산화탄소 분압, 투과측과 분리막 내부의 압력비 그리고 공급 기체가 분리막 내부에 머무르는 체류 시간임을 알 수 있었다.