• 센서학회지
• /
• 제31권4호
• /
• pp.244-248
• /
• 2022

Recently, several studies on the development of superhydrophobic surfaces using various nano-sized carbon-based materials have been conducted. The superhydrophobic surfaces developed using carbon soot have advantages such as low processing cost and remarkable physical and chemical properties. However, their durability is low. To address this problem, in this study, a superhydrophobic surface with high durability and a multilayer structure was fabricated using ethanol vapor treatment. Candle soot was deposited on an aluminum substrate coated with paraffin wax, and a micro-nano multilayer structure with a size of several micrometers was fabricated via ethanol vapor treatment. The fabricated superhydrophobic surface was confirmed to have a contact angle of at least 156° and high durability. Finally, it was confirmed that ethanol vapor not only changed the nanostructure of carbon but also affected the durability of the structure.

• 에너지공학
• /
• 제21권4호
• /
• pp.378-384
• /
• 2012

Higher compression ratio is required in diesel engine to ignite the fuel that leads to better efficiency. For complete combustion inside the cylinder it is important to ensure the clean air flow with free of debris and as cool as possible. In this manner, modification of intake valve arrangements is taken in to consideration importantly. In this paper, the intake valve arrangements are modified with newly designed valve mixer. It causes swirl flow of air through the intake port that mixing with the fuel followed by complete combustion. The use of valve mixer reduces the carbon sediment formation on valve fillet and its face area as the carbon particles gradually take place on it after certain running period. It therefore, helps to increase the valve lifetime. And at the same time it reduces the exhaust elements i.e. soot from the automobiles to a significant level.

• 한국자동차공학회논문집
• /
• 제21권2호
• /
• pp.98-103
• /
• 2013

Conventional method to estimate mass of particulate matter accumulated in diesel particulate filter is to use pressure difference between upstream and downstream of the filter. Then measured pressure difference should be compared that of clean condition which is no particulate matter accumulated in DPF. During regeneration soot oxidation is also estimated by same method. This methodology, however, has demerit on accuracy because of pressure difference deviation of clean DPFs and pressure difference caused by non-carbon based PM which is different from that of caused by carbon based PM. This study suggests new methodology to estimate accumulated soot oxidation rate through exhaust gas characteristics during regeneration. Results, more high accuracy of soot oxidation was obtained by analysis of relationship between fuel mass and concentration of carbon dioxide and oxygen.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 제35회 춘계학술대회
• /
• pp.120-129
• /
• 2002

New method and device for the on-line measurement of soot concentration in a diesel engine oil are proposed, where the measurement principle is based mainly on attenuated internal total reflection. Various laboratory tests of the detector were performed mainly with carbon black particles of different contamination levels. It was found that the proposed detector could be well used to monitor oil deterioration due to soot contamination. Operational range of the detector was found from 0 to 5 mass percentage of soot content. Test results with water and fuel dilution showed that these effects were not remarkable. However, adsorption of carbon black particles to a measurement surface was considered to be a critical problem in the new detector. Effects of particle deposition onto the interface was experimentally evaluated with the oil temperature and turbulence and discussed throughout this work.

• 산업기술연구
• /
• 제39권1호
• /
• pp.1-5
• /
• 2019

In this study, we examined the effect of NO addition on the ozone-induced soot oxidation activity of $LaMnO_3$ perovskite catalysts. The addition of 10~20% NO ($NO_2$) with respect to the concentration of ozone effectively enhanced the rate of ozone-induced soot oxidation rate over $LaMnO_3$. However, the excessive addition of NO ($NO_2$) was detrimental to ozone-induced soot oxidation activity. It is supposed nitrogen oxides would adsorb on the catalyst and then react with carbon-oxygen species developed on soot surface, but an excessive addition of nitrogen oxide would inhibit the formation of carbon-oxygen species, which is a key intermediate in the reaction, and consequently suppress the oxidation rate of soot.

• 한국화재소방학회논문지
• /
• 제26권5호
• /
• pp.35-40
• /
• 2012

본 연구에서는 WSR에서 혼합기의 CO첨가 효과에 따른 매연의 생성특성을 규명하기 위하여 수치해석 연구를 수행하였다. 연료는 에틸렌을 사용하였으며, 산화제는 순수 공기를 이용하였다. 서로 다른 당량비 조건(${\phi}$=2.0, 2.5, 3.0)에서 CO의 농도를 변화시켜가며 매연 생성 특성을 조사하였다. 10 %의 CO 첨가 경우에는 가장 작은 양의 CO를 유입하는데도 불구하고, 배출되는 CO의 몰분율이 다른 당량비 경우에 비해서 최대값을 나타낸다. 이는 초기 매연이 생성되는 지점에서는 매우 적은량의 CO가 매연이나 다른 탄소화합물로 변화함을 의미한다. 매연부피분율은 CO의 첨가량이 증가함에 따라 감소되는데 매연생성에서 중요 화학종인 pyrene과 아세틸렌의 생성이 CO의 첨가에 의해 저하되기 때문이다. 또한 당량비가 2.5인 경우에 가장 많은 매연이 생성됨을 확인 할 수 있는데, 이는 연료과잉조건과 연소온도의 적절한 기여로서 설명되어 질 수 있다. 또한, 표면성장율과 중요 화학종의 농도는 매연생성에 대한 HACA(hydrogen abstraction and carbon addition)기구를 정당화한다.

• 대한기계학회논문집B
• /
• 제24권7호
• /
• pp.984-993
• /
• 2000

Characteristics of carbon soot particles generated in diffusion flames were studied. Non-sooting and sooting normal diffusion flames using propane or ethylene as fuel were selected. In the flames, soot volume fraction was measured by a thermocouple, and primary particle diameter and cluster size were analyzed by TEM photographs. The characteristics of soot particles depended on flame(non-sooting or sooting) and fuel(propane or ethylene) type. Unlike the sooting diffusion flames, particle growth and oxidation processes were clearly observed in the non-sooting diffusion flames. In the sooting diffusion flames, soot particle size was slightly changed at the flame tip.

• 대한환경공학회지
• /
• 제28권10호
• /
• pp.1065-1073
• /
• 2006

영흥 화력발전소 1호기 보일러에서 발생된 미연분은 석탄 회의 재활용 및 보일러 효율 측면에서 문제를 일으키고 있었다. 본 연구에서는 미연분 및 사용 석탄의 특성과 현장의 연소조건 분석을 수행하고 보일러 운전조건을 변경하므로서 보일러에서 발생되는 미연분을 저감하고자 하였다. 미연분의 물리, 화학적 분석 결과 대부분 중공(中空)형태의 Cenosphere와 뭉쳐진(Agglomerated) 형태의 Soot로 이루어져 있었다. 영흥 화력발전소에서 사용중인 6개 탄종에 대하여 Tar 및 Soot의 발생 가능량을 CPD(Chemical Percolation Devolatilization) 모델을 이용하여 조사한 결과, Sanseo, Ensham, Elk Valley 탄의 경우 그 발생 가능량이 비교적 적었으며 Peabody, Arthur, Shenhua 탄은 높았다. 영흥 화력발전소 1호기 보일러의 각 미분탄 공급관에서의 미분탄 공급량을 측정하였는데 코너 별로 공급되는 몇몇 버너에서 미분탄이 편중되어 공급되고 있음을 알 수 있었다. 이에 따라 soot가 주성분인 미연분의 산화율을 증가시키기 위하여 과잉공기량을 증가시키고 산화제와의 혼합정도를 높이기 위하여 SOFA(Separated Over Fire Air)의 yaw 각도를 적절히 조절함으로서 미연분의 발생량을 현저히 감소시킬 수 있었다.

• 한국연소학회지
• /
• 제8권1호
• /
• pp.9-16
• /
• 2003

Carbon soot emission from combustion processes, especially from diesel engines, is a subject of growing concern since soot is known to seriously affect human health. Efforts have been made to oxidize soot particles utilizing Non-Thermal Plasma(NTP) techniques. When oxygen is carried into a plasma device, electrons generated by the plasma dissociate the oxygen, resulting in the formation of oxygen atoms. These highly activated atoms, called O radicals, are known as strong oxidizing agent. This paper presents concentration variations of CO and $CO_2$ at the exit of the plasma device, resulting from the soot oxidation by O radicals, with variations of inlet oxygen concentration, gas temperature, and gas flow rate. Based on the data, Arrehenious rate constants of reactions between C(s)+O and C(s)+O+O were proposed.

• 대한기계학회논문집B
• /
• 제26권8호
• /
• pp.1062-1068
• /
• 2002

In our previous study, it was proven that the mean size and the total number concentration of carbon soot particles emitted from a $C_2$H$_4$ normal diffusion flame decreased when a DC corona was discharged to pin-pin electrodes. In this work the effect of AC corona discharge on soot emission was investigated and compared with that of DC corona discharge. For the pin-pin electrodes the size of soot particles and the number concentration decreased by the AC voltage. There were only slight changes in size distribution with frequencies, while the magnitude of applied voltage was constant. When the electric field was applied to plate-plate electrodes, the size and the number concentration also decreased with the applied AC voltages. For applied voltages above 2kV the effect of frequency increase on the soot emission was effective.