• Carbon letters
• /
• 제21권
• /
• pp.81-85
• /
• 2017

The objective of this study is the removal of chromium from tannery wastewater by electrosorption on carbon prepared from lignocellulosic natural residue "peach stones' thermally treated. The followed steps for obtaining coal in chronological order were: cleaning, drying, crushing and finally its carbonization at $900^{\circ}C$. The characterization of the carbon material resulted in properties comparable to those of many coals industrially manufactured. The study of the dynamic adsorption of chromium on the obtained material resulted in a low removal rate (33.7%) without applied potential. The application of negative potentials of -0.7 V and -1.4 increases the adsorption of chromium up to 90% and 96% respectively. Whereas a positive potential of +1.4V allows desorption of the contaminant of 138%.

• Carbon letters
• /
• 제14권3호
• /
• pp.131-144
• /
• 2013

The carbon nanotube (CNT) represents one of the most unique inventions in the field of nanotechnology. CNTs have been studied closely over the last two decades by many researchers around the world due to their great potential in different fields. CNTs are rolled graphene with $SP^2$ hybridization. The important aspects of CNTs are their light weight, small size with a high aspect ratio, good tensile strength, and good conducting characteristics, which make them useful as fillers in different materials such as polymers, metallic surfaces and ceramics. CNTs also have potential applications in the field of nanotechnology, nanomedicine, transistors, actuators, sensors, membranes, and capacitors. There are various techniques which can be used for the synthesis of CNTs. These include the arc-discharge method, chemical vaporize deposition (CVD), the laser ablation method, and the sol gel method. CNTs can be single-walled, double-walled and multi-walled. CNTs have unique mechanical, electrical and optical properties, all of which have been extensively studied. The present review is focused on the synthesis, functionalization, properties and applications of CNTs. The toxic effect of CNTs is also presented in a summarized form.

• 한국환경과학회지
• /
• 제21권3호
• /
• pp.383-390
• /
• 2012

For the cost-effective biological nitrogen removal (BNR) process whose characteristics of influent have low COD/N ratios, the automatic control system for the addition of external carbon based on oxidation-reduction potential (ORP) data in an anoxic reactor has been developed. In this study, it was carried out with a pilot-scale Bardenpho process which was consisted of anoxic 1, aerobic 1, aerobic 2, anoxic 2, aerobic 3 tank and clarifier. Firstly, the correlation coefficient ($R^2$) of the dosage of external carbon source and ORP value was about 0.97. Consequently, the automatic control system using ORP showed that the dosage of external carbon source was decreased by about 20% compared with a stable dosage of 75 mg/L based on the COD/N ratio of the anoxic influent.

• Bulletin of the Korean Chemical Society
• /
• 제30권3호
• /
• pp.700-702
• /
• 2009

• Applied Microscopy
• /
• 제44권2호
• /
• pp.68-73
• /
• 2014

With wide use of nano-materials, it is increasingly important to address their potential toxicity to mammalian cells. However, toxic effects of these materials have been mainly assessed by the cell survival assays. Considering that mitochondrial morphology and quality are highly sensitive to the condition of the cells, and the impairment of mitochondrial function greatly affect the survival of cells, here we tested the impact of multi-walled carbon nanotubes (MWNT) on the survival, mitochondrial morphology, and their membrane potential in HeLa cells. Interestingly, although MWNT did not induce cell death until 24 hours as assessed by pyknotic cell assay, mitochondrial length was elongated and the mitochondrial membrane potential was significantly reduced by exposure of HeLa cells to MWNT. These results suggest that MWNT exposure is potentially harmful to the cell, and the mechanism how MWNT alters mitochondrial quality should be further explored to assess the safety of MWNT use.

• Composites Research
• /
• 제22권1호
• /
• pp.9-14
• /
• 2009

본 논문에서는 탄소섬유 복합재료의 균열의 위치 및 성장을 감지하기 위하여 브리지 회로 개념이 적용된 전기 전위법을 제안하였다. 중앙 관통 균열을 가진 복합재료 박판 시험편에 두 쌍의 전극을 생성하였으며, 브리지 회로 개념을 적용하여 한 쌍의 전극에 외부 전압을 인가하고 다른 한 쌍의 전극으로부터 출력 전압 변화를 관찰하였다. 실험과 유한요소해석을 통하여 전극의 크기와 간격, 균열의 위치와 크기 및 성장 방향의 영향을 고찰하였다. 검출 가능한 균열의 크기는 전극의 크기 보다는 전극의 간격에 의한 영향이 더 컸으며, 전극의 크기와 간격이 작을수록 균열의 검출 능력이 우수하였다. 또한, 균열 크기가 증가할 수록, 입력 전극과 가까울수록 출력 전압의 변화가 큼을 관찰할 수 있었다.

• Journal of Electrochemical Science and Technology
• /
• 제10권2호
• /
• pp.99-103
• /
• 2019

A derivative of 1,4-Naphthoquinone coded HBU671 was synthesized and used in addition to activated carbon as composite electrode for supercapacitor application. From the electrochemical properties analysis, a specific capacitance of about $300F\;g^{-1}$ exhibited almost two times of that of activated carbon at a scan rate of $100mV\;s^{-1}$ and a potential window of - 0.2 - 1V. This improvement is due to the inherent redox reaction in HBU671. Cycle test also proved that this composite is still stable even after 1000 cycle within the applied potential window and it is highly recommended for practical application.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.76.1-76.1
• /
• 2010

Recently, many efforts to solve the durability problem of PEM fuel cell are carried on constantly. However, despite this attention, durability researches of gas diffusion layer (GDL) are not much reported yet. Generally, GDL of PEM fuel cell experiences three external attacks, which are dissolution of water, erosion of gas flow, corrosion of electric potential. In this study, among these degradation factors, carbon corrosion of electric potential was focused and investigated with accelerated carbon corrosion test. Through the test, it is confirmed that carbon corrosion occurred at GDL, and corroded GDL decreased a performance of operating fuel cell. The property changes of GDL were measured with various methods such as air permeability meter, pore distribution analyzer, thermo gravimetric analyzer, and tensile stress test to discover the effects of carbon corrosion. Carbon corrosion caused not only loss of weight and thickness, but also degradation of mechanical strength of GDL. In addition, to analysis the reason of GDL property changes, a surface and a cross section of GDL were observed with scanning electron microscope. After 100 hours test, the GDL showed serious damage in center of layer.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.89.1-89.1
• /
• 2011

The influence of potential and humidity on the electrochemical carbon corrosion in high temperature polymer electrolyte membrane fuel cells(HT-PEMFCs) is investigated by measuring $CO_2$ emission at different potentials for 30 min using on-line mass spectrometry. These results are compared with low tempterature polymer electrolyte membrane fuel cells(LT-PEMFCs) operated at lower temperature and higher humidity condition. Although the HT-PEMFC is operated at non humidified condition, the emitted $CO_2$ in the condition of HT-PEMFC is more than LT-PEMFC at the same potential in carbon corrosion test. Thus, carbon corrosion shows a stronger positive correlation with the cell temperature. In addition, the presence of a little amount of water activate electrochemical carbon corrosion considerably in HT-PEMFC. With increased carbon corrosion, changes in fuel cell electrochemical characteristics become more noticeable and thereby indicate that such corrosion considerably affects fuel cell durability.

• 한국분말재료학회지
• /
• 제23권6호
• /
• pp.420-425
• /
• 2016

N-doped carbon nanofibers as catalysts for oxygen-reduction reactions are synthesized using electrospinning and carbonization. Their morphologies, structures, chemical bonding states, and electrochemical performance are characterized. The optimized N-doped carbon nanofibers exhibit graphitization of carbon nanofibers and an increased nitrogen doping as well as a uniform network structure. In particular, the optimized N-doped carbon nanofibers show outstanding catalytic activity for oxygen-reduction reactions, such as a half-wave potential ($E_{1/2}$) of 0.43 V, kinetic limiting current density of $6.2mAcm^{-2}$, electron reduction pathways (n = 3.1), and excellent long-term stability after 2000 cycles, resulting in a lower $E_{1/2}$ potential degradation of 13 mV. The improvement in the electrochemical performance results from the synergistic effect of the graphitization of carbon nanofibers and the increased amount of nitrogen doping.