• 한국재료학회지
• /
• 제1권2호
• /
• pp.86-92
• /
• 1991

Morse potential을 변형한 2체항(2-body tem)과 Axilrod-Teller potential을 변형한 3체항(3-body tem)으로 구성된 포텐셜에너지 함수를 사용하여 $C_2-C_6$ cluster 동소체들의 에너지들의 에너지를 3체항 세기인자(3-body intensity factor)의 함수로 나타냄으로써 3체 인력의 기여도의 증가함에 따라 carbon cluster들의 구조는 open structure로부터 closed structure로, 또한 복잡한 구조로부터 단순한 구조, 즉 3차원적인 형태로부터 2차원 및 1차원적인 형태로 변해감을 알 수 있었다.

• Interaction and multiscale mechanics
• /
• 제4권4호
• /
• pp.247-255
• /
• 2011

Understanding the structural stability of carbon nanostructure under heat treatment is critical for tailoring the thermal properties of carbon-based material at small length scales. We investigate the heat resistance of the single carbon nanoball ($C_{60}$) and carbon nanoonions ($C_{20}@C_{80}$, $C_{20}@C_{80}@C_{180}$, $C_{20}@C_{80}@C_{180}C_{320}$) by performing molecular dynamics simulations. An empirical many-body potential function, Tersoff potential, for carbon is employed to calculate the interaction force among carbon atoms. Simulation results shows that carbon nanoonions are less resistive against heat treatment than single carbon nanoballs. Single carbon nanoballs such $C_{60}$ can resist heat treatment up to 5600 K, however, carbon nanoonions break down after 5100 K. This intriguing result offers insights into understanding the thermal-mechanical coupling phenomena of nanodevices and the complex process of fullerenes' formation.

• Carbon letters
• /
• 제10권3호
• /
• pp.213-216
• /
• 2009

The electrochemical deposition of Pt nanoparticles on carbon nanotubes (CNTs) supports and their catalytic activities for methanol electro-oxidation were investigated. Pt catalysts of 4~12 nm average crystalline size were grown on supports by potential cycling methods. Electro-plating of 12 min time by potential cycling method was sufficient to obtain small crystalline size 4.5 nm particles, showing a good electrochemical activity. The catalysts' loading contents were enhanced by increasing the deposition time. The crystalline sizes and morphology of the Pt/support catalysts were evaluated using X-ray Diffraction (XRD) and Transmission Electron Microscopy (TEM). The electrochemical behaviors of the Pt/support catalysts were investigated according to their characteristic current-potential curves in a methanol solution. In the result, the electrochemical activity increased with increased plating time, reaching the maximum at 12 min, and then decreased. The enhanced electroactivity for catalysts was correlated to the crystalline size and dispersion state of the catalysts.

• 한국환경복원기술학회지
• /
• 제12권2호
• /
• pp.95-105
• /
• 2009

Land Use Changes (LUCs) have effects on greenhouse gas emissions and carbon stocks in soil and vegetation. Therefore, predictions for LUC are very important for achieving quantitative targets of $CO_2$ reduction rates. Some research exists on carbon fluxes and carbon cycles to estimate carbon stocks in terrestrial ecosystems in Korea. However, these researches have limitations in terms of helping us understand future potential reductions of $CO_2$ that reflect the influence of LUC. The aim of this study is to analyze the reduction levels of $CO_2$ emissions while considering LUC scenarios that effect carbon fluxes for LCS basic study in the year 2030. In this study, a common approach to model the effects of LUC on carbon stocks is the use of CA-Markov technical process with LUC patterns in the past. Potential reduction of $CO_2$ is calculated by change of land use that contains different soil organic carbon, each land use type, and biomass in vegetation. An IPCC analytical method of natural carbon sink and coefficient results from previous study in Korea is used as a calculation method for potential reduction of $CO_2$. As a result, 12,419 KtC will be reduced annually, which is 8.3% percent of 2005 $CO_2$ emissions in Korea. This will result in 3,226 hundred million won of economic efficiency. In conclusion, conservation of natural carbon sinks is necessary even if the amount of potential reduction change is little.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2008년도 추계학술대회 초록집
• /
• pp.34-35
• /
• 2008

We investigated the effects of Pt nano electrodeposits on the corrosion of carbon substrate in an acidic solution. The electrodes for experiments were prepared by electrodepositing Pt on carbon substrate in a solution of 5 mM $H_2PtCl_6$ and 0.5 M $H_2SO_4$ using pulse deposition technique. In cyclic voltammograms for the carbon electrodes with and without Pt nano electrodeposits, total anodic current including both currents from oxygen evolution reaction and carbon corrosion increased abruptly above a critical potential. In addition, the critical potential of the carbon electrodes with Pt nano electrodeposits was lower than that of bare carbon electrode. This phenomenon was more prominent at $75^{\circ}C$ than $25^{\circ}C$. In potentiostatic experiments, the current transients and the corresponding power spectral density increased with increasing the applied potential for the electrodes. Furthermore, the current transients for the carbon electrodes with Pt nano electrodeposits were much higher than those for the bare carbon substrate. This indicates that the corrosion of carbon substrate can be highly accelerated by Pt nano electrodeposits.

• Journal of Ecology and Environment
• /
• 제37권3호
• /
• pp.139-145
• /
• 2014

Denitrification permanently removes nitrate from aquatic ecosystems, so construction of denitrification walls to enhance denitrification activity is often suggested to reduce the nitrate levels from tributary ecosystems. However, little information is available to guide the choice of appropriate organic materials for increasing denitrification rates in the walls. This study investigated how differences in organic substrates originating from litter and organic materials affected denitrification and carbon mineralization rates in riparian sediments. Potential denitrification rates were highest in riparian sediments that contained large quantities of extractable organic carbon (Ext. Org C) and that had high anaerobic carbon mineralization rates, but they were negatively correlated with C:N ratios. Therefore, this research suggested that the both carbon quantity and quality should be considered when assessing the efficiency of organic substrates to remove nitrate from tributary ecosystems.

• 열처리공학회지
• /
• 제29권3호
• /
• pp.113-123
• /
• 2016

In the present work, we investigated the effects of the carbon potential on the formation of carbide at the carburized surface and anti-pitting fatigue strength in the supercarburized steels. Two low carbon steels with different Cr concentrations were adopted and the repeated supercarburizing treatment carried out with the different carbon potential conditions. The microstructure and carbides at the supercarburized surface were observed by using optical microscope and scanning electron microscope. The microhardness test was performed and the hardness distribution and the effective case depth at the supercarburized surface were discussed. The roller pitting fatigue test was carried out and the fatigue strength was evaluated with different the carbon potential conditions. The microstructure of the fatigue specimen surface was observed by means of scanning electron microscope and scanning transmission electron microscope. Depending on the chemical composition of the steels and the carbon potential condition, the resistance of temper softening and pitting failure was influenced due to the carbide distribution and the formation of coarse network carbide. Thus, it was confirmed that the control of the carbide formation is a key factor to improve the anti-pitting fatigue strength in the supercarburized steels.

• 한국세라믹학회지
• /
• 제30권10호
• /
• pp.819-822
• /
• 1993

The purpose of this paper is a investigation of sensing mechanism for the carbon monoxide gas in CuO infiltrated ZnO ceramics. Potential barriers between CuO and ZnO can explain the selective sensing of carbon monoxide gas in the physically contacted CuO/ZnO ceramics. A specimen having no potential barrier between CuO and ZnO was prepared to see whether the gas sensing mechanism is related to the potential barrier. CuO and ZnO was prepared to see whether the gas sensing mechanism is related to the potential barrier. CuO was painted on the non electrode sides of ZnO ceramics. The CuO painted ZnO ceramics showed that the sensitivityfor the carbon moxnoxide gas was 1.3 times as high as that for the hydrogen gas. It is almost same gas sensitivity as that of the CuO infiltrated ZnO ceramics.

• Corrosion Science and Technology
• /
• 제15권1호
• /
• pp.1-5
• /
• 2016

Zinc ethyl silicate coatings containing multi walled carbon nanotubes (MWCNTs) were prepared, to which we added spherical and flake shaped zinc particles. The anti-corrosive effects of MWCNTs and zinc shapes on the zinc ethyl silicate coated carbon steel was examined, using electrochemical impedance spectroscopy and corrosion potential measurement. The results of EIS and corrosion potential measurement showed that the zinc ethyl silicate coated with flake shaped zinc particles and MWCNT showed lesser protection to corrosion. These outcomes were in agreement with previous results of corrosion potential and corrosion occurrence.

• 한국진공학회지
• /
• 제12권1호
• /
• pp.25-34
• /
• 2003

탄소 원자 간의 interaction potential로서 Tersoff에 의해 제안된 반 경험적인 potential을 이용하여 고경질 탄소박막의 합성 거동을 전산 모사하였다. 고에너지의 탄소익사를 diamond (100) 표면에 충돌시켜 고밀도의 비정질 탄소박막을 만들 수 있었으며, 전산모사에 의해 합성된 탄소 박막의 물성과 Shin 등이 발표한 filtered cathodic arc 공정에 의해 합성된 탄소의 물성을 비교하였다. ta-C 합성 실험에서 관찰된 바와 같이 최적의 에너지 영역에서 다이아몬드에 가장 유사한 물성의 필름이 합성되었으며, 이때의 입사원자 에너지인 50 eV 는 실험적으로 최적의 필름이 얻어지는 조건에서의 탄소이온 에너지와 유사하였다. 전산모사에 의해 합성된 박막은 비정질이었으며, 다이아몬드 lattice에 해당하는 short range order를 가지긴 있었다. 그러나, 최적의 에너지 조건에서는 2.1 $\AA$의 거리의 준안정 site에 탄소들이 많이 존재하는 것을 알 수 있었는데, 이는 필름 표면의 국부적 급냉효과가 최대가 되는 조건과 일치하였다. 이러한 결과는 다이아몬드상 카본필름의 합성에 있어서, 고 에너지의 탄소인자가 충돌하면서 발생하는 국소적인 열에너지의 증가가 가장 빨리 제거되는 조건에서 최적의 물성을 가지는 경질탄소 필름이 형성되는 것을 보여주고 있다.