• Journal of Forest and Environmental Science
• /
• v.38 no.3
• /
• pp.184-194
• /
• 2022

Triplochiton scleroxylon K. Schum is the plant species most affected by logging activities in the East Region of Cameroon due to its market value. This logging has impacted the ecological niche of the fern plant for which limited research has been done. The aim of this study is to contribute towards improving knowledge of fern richness and biomass on T. scleroxylon within the Central African sub-region. Fern data collection was done on 20 felled/harvested T. scleroxylon where, in addition to fern inventory, fern biomass was collected by the destructive method. The diameter and height of T. scleroxylon measured were used as explanatory variables in allometric equations for fern biomass estimation. Fern inventory was characterized using diversity index. Eight fern species were recorded on T. scleroxylon (≈5 species/T. scleroxylon). The minimum diameter where fern could be found is 59.4 cm. The average fern biomass found was 23.62 kg/T. scleroxylon. Pearson correlation coefficient showed a positive correlation (r>0.55) between fern biomass and T. scleroxylon diameter. For allometric equation, the logarithmic model improved better the adjustment than the non-logarithmic model. However, the quality of the adjustment is improved more when only the diameter is considered as an explanatory variable. Fern biomass is estimated to 90.08 kg/ha^-1 with 76.02 kg/ha^-1 being lost due to T. scleroxylon exploitation in the study area. This study is a contribution towards increasing knowledge of fern diversity specific to T. scleroxylon, and also fern biomass contribution to climate change mitigation and the potential carbon loss due to T. scleroxylon exploitation.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.3
• /
• pp.667-675
• /
• 2018

Increasing emissions regulations and demand of high-efficiency cars that travels a lot of distance with less fuel, there is growing interest in Energy Consumption Efficiency. Korean energy consumption efficiency compute combined Fuel Economy by driven city & highway driving mode and present final Energy Consumption Efficiency as using 5-cycle correction formula. Energy consumption efficiency is computed Carbon-balance-method, when used burning fuel play a key role in vehicle performance & Energy Consumption Efficiency. In Korea, vehicle fuel is circulate by Petroleum and Petroleum Alternative Business Act, there is property difference in quality standard because petroleum sector's refine method or type of crude oil. It does not appear a big difference according to fuel, because it sets steady quality standard, it may affect the performance of automobile. Thus, in research We purchase a few diesel fuel which circulated in the market in summer season though directly-managed-gas station by petroleum sector, resolve property each of fuel, we compute Fuel Economy each of them. We analyze into change depend on applying for property as nowadays utilizing Energy Consumption Efficiency calculating formula of gasoline and diesel fuel. As result, Density each of sample fuel has a maximum difference roughly 0.9%, net heat value each of sample fuel has difference 1.6%, result of current Energy Consumption Efficiency each of sample fuel has a difference roughly 1% at city drive mode, 1.4% at highway drive mode. Result of use gasoline calculator formula shows less 6% result than nowadays utilizing Energy Consumption Efficiency calculating formula, each of sample's Energy Consumption Efficiency shows maximum roughly 1.4% result in city & highway drive mode.

• Journal of Korea Society of Industrial Information Systems
• /
• v.24 no.5
• /
• pp.9-16
• /
• 2019

In today's global energy market, the importance of green energy is emerging. Hydrogen energy is the future clean energy source and one of the pollution-free energy sources. In particular, the fuel cell method using hydrogen enhances the flexibility of renewable energy and enables energy storage and conversion for a long time. Therefore, it is considered to be a solution that can solve environmental problems caused by the use of fossil resources and energy problems caused by exhaustion of resources simultaneously. The purpose of this study is to efficiently produce hydrogen using plasma, and to study the optimization of DME reforming by checking the reforming reaction and yield according to temperature. The research method uses a 2.45 GHz electromagnetic plasma torch to produce hydrogen by reforming DME(Di Methyl Ether), a clean fuel. Gasification analysis was performed under low temperature conditions ($T3=1100^{\circ}C$), low temperature peroxygen conditions ($T3=1100^{\circ}C$), and high temperature conditions ($T3=1376^{\circ}C$). The low temperature gasification analysis showed that methane is generated due to unstable reforming reaction near $1100^{\circ}C$. The low temperature peroxygen gasification analysis showed less hydrogen but more carbon dioxide than the low temperature gasification analysis. Gasification analysis at high temperature indicated that methane was generated from about $1150^{\circ}C$, but it was not generated above $1200^{\circ}C$. In conclusion, the higher the temperature during the reforming reaction, the higher the proportion of hydrogen, but the higher the proportion of CO. However, it was confirmed that the problem of heat loss and reforming occurred due to the structural problem of the gasifier. In future developments, there is a need to reduce incomplete combustion by improving gasifiers to obtain high yields of hydrogen and to reduce the generation of gases such as carbon monoxide and methane. The optimization plan to produce hydrogen by steam plasma reforming of DME proposed in this study is expected to make a meaningful contribution to producing eco-friendly and renewable energy in the future.

• Journal of the Korean Society of Tobacco Science
• /
• v.24 no.1
• /
• pp.67-73
• /
• 2002

In light of addressing consumer health concern, coping with anti-tobacco movement, and promoting new product, tobacco industry is actively pursuing to make a new generation of cigarettes with low tar and nicotine deliveries, and less harmful substances. Low tar and low nicotine cigarettes increases their market shares dramatically world wide, especially in KT&G, multinational tobacco companies, EU countries, even in China regulated by CNTC to set up yearly target to lower tar and nicotine deliveries. On the other hand, to design a new cigarette with reduced harmful substances begins to gain speed. The "modified Hoffmann list" publishes thirty plus substances in tobacco leaf and main smoke stream, which is the prime suspect causing health problems. Various ways and means are developed to reduce such components including new tobacco breeds, new curing method, tobacco leaf treatment before processing, selected filtration system, innovated casing system to reduce free radicals, as well as some non conventional cigarette products. In TSRC held this year, the main topic is related to reduce tobacco specific nitrosamines in tobacco leaf. The new generation of cigarette is in the horizon. It still needs a lot help to produce commercial products with satisfied taste and aroma characters. The flavor industry is not regulated by many governments demanding which ingredients might or might not be for tobacco use. However, most of the cigarette companies self impose a list of ingredients to guide flavor suppliers to design flavors. Unfortunately, the number of ingredients in those lists is getting shorter every year. It is understandable that the health is not the only reason. Some cigarette companies are playing safe to protect the company from potential lawsuit, while others are just copying from their competitors. Moreover, it is obvious that it needs more assistance from casings and flavors to design new generation of cigarettes with missing certain flavor components in tobacco leaf and main smoke stream. These flavor components are either non-existed or at lower level at new form of cured tobacco leaf or filtered in the main smoke stream along with reduced harmful substances. The use of carbon filters and other selected filtration system poses another tough task for flavor system design. Specific flavor components are missing from the smoke analysis data, which brings a notion of "carbon taste" and "dryness" of mouth feel. It is ever more demanded by cigarette industry to flavor suppliers to produce flavors as body enhancer, tobacco notes, salivating agents, harshness reducer, and various of aromatic notes provided they are safe to use. Another trend is that water based flavor or flavor with reduced ethanol as solvent is gaining popularity. It is preferred by some cigarette companies that the flavor is compounded with all natural ingredients or all ingredients should he GMO free. The new generation of cigarettes demands many ways of new thinking process. It is also vital for tobacco industry. It reflects the real needs for the consumers that the cigarette product should be safe to use as well as bearing the taste and aroma characters smokers always enjoyed. An effective tobacco flavor system is definitely a part of the equation. The global trend of tobacco industry is like trends of any other industries lead by consumer needs, benefited with new technology availability, affected by the global economy, and subjected for various rules and regulations. Anti-tobacco organizations and media exceptionally scrutinize cigarette, as a legal commercial product. Cigarette is probably the most studied commercial product for its composition, structure, deliveries, effects, as well as its new developmental trend. Therefore, any new trend of cigarette development would be within these boundaries. This paper is trying to point out what it would be like for tobacco industry in the next few yews and what concerns the tobacco industry. It focuses mostly on the efforts to produce safer cigarettes. It is such a vital task for the tobacco industry and its affiliate industries such as cigarette papers, filters, flavors, and other materials. The facts and knowledge presented in this paper might be well known for the public. Some of the comments and predictions are very much personal opinion for a further discussion.

• Journal of Korean Society of Forest Science
• /
• v.103 no.3
• /
• pp.431-438
• /
• 2014

This study was conducted to assess forest biomass resource which is a carbon sink and a renewable resource in Korea. The total forest biomass resource potential was 804 million tons, and conifers, broadleaved forest and mixed forest accounted for 265 million tons, 282 million tons, and 257 million tons, respectively. Proportionately to regional forest stocks, biomass potential of Gangwon-do had most biomass potential, followed by Gyeongsangbuk-do and Gyeongsangnam-do. The woody biomass from the byproduct of sawn timber in commercial harvesting was 707 thousand ton/year, and that from the byproduct of forest tending was 592 thousand ton/year. The amount resulted in about 1,300 thousand ton/year of potential supplies from forest biomass resource into the energy market. It's tonnage of oil equivalent(toe) was 585 thousand ton/year. In this study, we developed a program (BiomassMap V2.0) for forest biomass resource mapping. Used system to develop this program was Microsoft Office Excel, Microsoft Office Access ArcGIS and Microsoft Visual Basic 6.0. Additionally, This program made use of tool such as ESRI MapObjects2.1 in order to take advantage of spatial information. This program shows the map of total biomass stock, annual biomass growth at forest land in Korea, and biomass production from forest tending and commercial harvesting. The information can also be managed by the program. The biomass resource map can be identified by regional and forest type for the purpose of utilization. So, we expect the map and program to be very useful for forest managers in the near future.

• The Journal of Engineering Geology
• /
• v.28 no.2
• /
• pp.133-160
• /
• 2018

$CO_2$ storage is a very important technology for reduction of greenhouse gas emissions and has been considered as almost the only viable and effective option for immediate large-scale $CO_2$ sequestration. Small-scale demonstration project for offshore $CO_2$ storage in the Pohang Basin is the transitional stage R&D program for technological preparation of large-scale $CO_2$ storage project in Korea. Through the extensive exploration research for prospective $CO_2$ storage sites, the offshore strata in the Pohang Basin was recommended for the storage formation of the small-scale demonstration project. The Pohang Offshore Storage Project launched at 2013, and has accomplished the technical demonstration and technological independence in a wide range of $CO_2$ storage technology, such as geophysical exploration, storage site characterization, storage design, offshore platform construction, injection-well drilling and completion, deployment of injection facility, operation of $CO_2$ injection, and $CO_2$ monitoring. The project successfully carried out $CO_2$ test injection in early 2017, and achieved its final goal for technical development and demonstration of $CO_2$ storage in Korea. The realization of $CO_2$ injection in this project is the measurable result and has been recorded as the first success in Korea. The Pohang Offshore Storage Project has a future plan for the continuous operation of $CO_2$ injection and completion of $CO_2$ monitoring system. The project has provided in-house technical and practical expertises, which will be a solid foundation for the commercial-scale $CO_2$ storage business in Korea. Additionally, the project will help to secure national technical competitiveness in growing international technology market for $CO_2$ storage.

• Journal of Distribution Science
• /
• v.10 no.1
• /
• pp.43-52
• /
• 2012

With the slowdown in environmental issues and the change of environmental consciousness, ecotourism is being discussed in various social fields. Ecotourism is being popularized for environmental protection, and now it is becoming a mainstream product from one of mass tourism. Ecotourism's emphasis on sustainable development in the tourism destination's society, economy, and environment, through ecotourism study and education, enable people to understand the core value of the ecological environment. 2011 was nominated as "the Year of World Forest" by the UN. In the recent years, forests are becoming increasingly important with their own values and functions in environment, economy, society, and culture. In particular, the global environmental issues caused by climate change are becoming an international agenda. Forests are the only effective solution for the carbon dioxide that causes global warming. Moreover, forests constitute a major part of ecotourism, and are now most used by ecotourists. For example, Korea, wherein 60% of the land is forest, attracts ecotourists. With the increasing interests in environment, the number of tourists visiting the ecosystem forest, which is highly valued for its conservation, is increasing significantly every year and is receiving considerable attention from the government. However, poor facilities in the forest ecotourism sites and improper market strategies are the reasons for the poor running of these sites. Furthermore, tourists' environmental awareness affects ecology environmental pollution or the optimization of forest ecotourism. In order to verify the relationships among tourist attractiveness, environmental consciousness, charm degrees of the attractions, and attitudes after tours, we established some scales based on existing research achievement. Then, using these scales, the researcher completed the questionnaire survey. From December 20, 2010 to February 20, 2011, after conducting surveys for 12 weeks, we finally obtained 582 valid questionnaires, from a total of 700 questionnaires, that could be used in statistical analysis. First, for the method of research and analysis, the researcher initially applied the Cronbach's (Alpha) for verifying the reliability, and subsequently applied the Exploratory factor analysis for verifying the validity. Second, in order to analyze the demographics, the researcher makes use of the Frequency analysis for the AMOS, measurement model, structural equation model computing, and also utilizes construct validity, convergent validity, discriminant validity, and nomological validity. Third, for the analysis of the ecotourists' environmental consciousness, impacts on tourist attractiveness, charm degrees of the attractions, and attitudes after the tour, the researcher uses AMOS 19, with the path analysis and equation of structure. After the research, researchers found that high awareness of natural protection lead to high tourist motivation and satisfaction and more positive attitude after the tour. Moreover, this research shows the psychological and behavioral reactions of the ecotourists to the ecotourist development. Accordingly, environmental consciousness does not affect the tourist attractiveness that has been interpreted as significant. Furthermore, people should focus on the change of natural protection consciousness and psychological reaction of ecotourists while ensuring the sustainable development of ecotourists and developing some ecotourist programs.

• Korean Journal of Weed Science
• /
• v.30 no.4
• /
• pp.330-339
• /
• 2010

In order to suggest correct direction of researches on Miscanthus spp. which are promising bioenergy crop, authors had reviewed and summarized various literature about botanical taxonomy, morphology and present condition of breeding, cultivation and utilization of miscanthus. Among the genus of Miscanthus which are known 17 species, the most important species are M. sinensis and M. sacchariflorus which origin are East Asia including Korea, and M. x giganteus which is inter-specific hybrid of tetraploid M. sacchariflorus and diploid M. sinensis. Miscanthus is superior to other energy crops in resistance to poor environments including cold, saline and damp soil, nitrogen utilization efficiency, budget of input energy and carbon which are required for producing biomass and output which are stored in biomass. The major species for production of energy and industrial products including construction material in Europe, USA and Canada is M. x giganteus which was introduced from Japan in 1930s. In present, many breeding programs are conducted to supplement demerits of present varieties and to develop "Miscanes" which is hybrid of miscanthus and sugar cane. In Korea, the researches on breeding and cultivation of miscanthus were initiated in 2007 by collecting germplasms, and developed "Goedae-Uksae 1" which is high biomass yield and "mass propagation method of miscanthus" which can improve propagation efficiency in 2009. In order to develop "Korean miscanthus industry" in future, the superior varieties available not only domestic but also foreign market should be developed by new breeding method including molecular markers. Researches on production process of cellulosic bio-ethanol including pre-treatment and saccharification of miscanthus biomass also should be strengthen.

• Economic and Environmental Geology
• /
• v.51 no.4
• /
• pp.381-392
• /
• 2018

This study examines strategies and implementation plans for commercializing $CO_2$ capture and storage, which is an effective method to achieve the national goal of reducing greenhouse gas. In order to secure cost-efficient business model of $CO_2$ capture and storage, we propose four key strategies, including 1) urgent need to select a large-scale storage site and to estimate realistic storage capacity, 2) minimization of source-to-sink distance, 3) cost-effectiveness through technology innovation, and 4) policy implementation to secure public interest and to encourage private sector participation. Based on these strategies, the implementation plans must be designed for enabling $CO_2$ capture and storage to be commercialized until 2030. It is desirable to make those plans in which large-scale demonstration and subsequent commercial projects share a single storage site. In addition, the plans must be able to deliver step-wised targets and assessment processes to decide if the project will move to the next stage or not. The main target of stage 1 (2019 ~ 2021) is that the large-scale storage site will be selected and post-combustion capture technology will be upgraded and commercialized. The site selection, which is prerequisite to forward to the next stage, will be made through exploratory drilling and investigation for candidate sites. The commercial-scale applicability of the capture technology must be ensured at this stage. Stage 2 (2022 ~ 2025) aims design and construction of facility and infrastructure for successful large-scale demonstration (million tons of $CO_2$ per year), i.e., large-scale $CO_2$ capture, transportation, and storage. Based on the achievement of the demonstration project and the maturity of carbon market at the end of stage 2, it is necessary to decide whether to enter commercialization of $CO_2$ capture and storage. If the commercialization project is decided, it will be possible to capture and storage 4 million tons of $CO_2$ per year by the private sector in stage 3 (2026 ~ 2030). The existing facility, infrastructure, and capture plant will be upgraded and supplemented, which allows the commercialization project to be cost-effective.

• Applied Biological Chemistry
• /
• v.19 no.2
• /
• pp.104-111
• /
• 1976

The experiment was tested with fruit of 5 astringent cultivars (Chungdo-Bansi, Sagoksi, Euisung-Bolbansi and Gyungsan-bansi) and was carried out to investigate effects of harvest time of fruit and fruit sizes on the removal of astringency and the practical utilization with Chungdo-Bansi was conducted. 1. Soluble tannin content was decreased in all cultivars as fruit was ripening and soluble tannin content at last harvest time was reduced about one half, as contrasted it's content at first harvest time and it showed that the times required of the removal of astringency was gradually shortened. 2. In soluble tannin contents was small fruit size was significantly higher than that of large fruit size. The times for the removal of astringency was required longer small fruit size than large fruit size. 3. In the changes of hardness according to fruit sizes, hardness of large fruit size was decreased rapider than that of small fruit size. This tendency became similar during and after the removal of astringency. 4. According to fruit sizes, sugar content of large fruit size was more amount than that of small fruit size During and after the removal of astringency, reduction of sugar content showed more rapidly large fruit size than small fruit size. 5. Results of the practical utilization in Chungdo-Bansi showed the promising market-ability and persimmons treated by carbon dioxide was increased more income than that treated by $CaC_2$.