• 한국산학기술학회논문지
• /
• 제18권8호
• /
• pp.338-343
• /
• 2017

본 논문은 이산화탄소 배출저감 및 산업폐기물을 재활용하기 위한 일환으로 산업부산물인 고로슬래그 미분말을 사용하였다. 고로슬래그 미분말은 선철의 제련 시 부산물로서 발생하는 고온 용융상태의 고로슬래그를 물로 급냉 시켜 유리화한 것으로 반응성이 높아 시멘트 및 콘크리트용 혼화재료로 다양하게 사용되고 있다. 고로슬래그 미분말을 치환한 콘크리트는 수화발열속도 저감, 온도상승 억제, 장기강도 향상, 수밀성 증대에 의한 내구성 향상 및 염화물 이온 침투억제에 의한 철근의 발청 억제 등의 다양한 효과를 기대할 수 있다. 그러나, 재령 초기 낮은 압축강도로 인해 사용량이 적은 실정이다. 따라서, 본 연구에서는 고로슬래그 미분말을 치환할 경우 낮은 압축강도를 보완하기 위해 증기양생이 초기 강도 발현에 미치는 영향을 평가하였고, 압축강도, SEM, EDS, XRD와의 관계를 분석하여 콘크리트의 압축강도 발현특성을 검토하였다. 그 결과 고로슬래그 미분말을 30% 치환한 콘크리트가 가장 우수하였으며, 이는 증기양생에 의해 고로슬래그 미분말의 피막을 파괴하여 ettringite 및 C-S-H겔 등의 수화물을 생성함으로 압축강도에 영향을 마친 것으로 판단된다.

• Tribology and Lubricants
• /
• 제30권6호
• /
• pp.323-329
• /
• 2014

The friction-reducing properties of lubricants containing ionic liquids based on ammonium dithiocarbamate are studied. The ionic liquids are produced through the following two steps: the synthesis of sodium alkyl dithiocarbamates via the substitution reaction of dialkylamine and carbon disulfide and their subsequent conversion into ammonium dithiocarbamate-based ionic liquids through an ion-exchange reaction with a quaternary alkyl ammonium halide salt. The structures of the ionic liquids are characterized by NMR spectroscopy and Fourier transform infrared spectroscopy. The isolated yields of the ionic liquids, which are viscous and pale yellow, are approximately 92%. The Brookfield viscosities and pour points of the ionic liquids are determined. Further, their wear resistances are measured through the four-ball wear test and the Schwingung Reibung Ver-schleiss (oscillation, friction, wear) test. The wear scar diameter of the lubricants containing 1 wt of the quaternary alkyl ammonium dithiocarbamate-based ionic liquids (0.475-0.631 mm) is significantly lower than that of the base oil (0.825 mm), proving that the ammonium dithiocarbamate-based ionic liquids have good friction-reducing characteristics. However, these friction-reducing characteristics fade significantly after long-term storage, owing to the degradation of the ionic liquids.

• 한국재료학회지
• /
• 제22권7호
• /
• pp.368-373
• /
• 2012

Glasses were prepared with compositions of $(13-x)BaO-80B2_O_3-7Li_2O{\cdot}xSm_2O_3$, BBLSx(x=0.5, 0.4, 0.3) by melting the starting materials of boron oxide(99.9%), lithium oxide(99.9%), barium carbon oxide(99.9%), and samarium oxide(99.9%) and then quenching the melt at $1350^{\circ}C$. This led to good-quality BBLSx(x=0.4, 0.3) and poor-quality BBLSx(x=0.5) glasses. The physical and structural properties of the BBLSx glasses were studied by means x-ray diffraction, scanning electron microscopy(SEM), differential scanning calorimetry(DSC), and dielectric spectroscopy. From the x-ray diffraction and SEM results, the quality of the BBLSx glasses significantly depends on the $Sm_2O_3$ concentration. The x-ray diffraction pattern showed that the crystallites in the BBLSx glasses after heat treatment at $700^{\circ}C$ may be $LiBaB_9O_{15}$. From the DSC results, the glass transition temperatures($T_g$), crystallization temperatures($T_c$), and the maximum temperatures of the crystallized($T_p$) BBLSx glasses all changed with the $Sm_2O_3$ concentration. According to the dielectric spectroscopy results, the values of the real dielectric constant and Tan ${\delta}$ of the BBLSx glasses depended on the $Sm_2O_3$ concentration. The values of the real dielectric constant and Tan ${\delta}$ were also shown to depend on the measuring temperature, possibly due to the ion migration in the bulk of the BBLSx glasses.

• 공업화학
• /
• 제16권2호
• /
• pp.206-211
• /
• 2005

백금과 티탄늄-이리듐전극으로 0.5 M의 철(II)과 코발트(II) 이온을 함유한 8.0 M의 질산용액 중에서 분자량이 1000, 4000, 20000인 폴리에틸렌글리콜류의 매개전해산화를 하였다. Fe(III)/Fe(II)와 Co(III)/Co(II) 산화환원계를 이용하여 전류밀도, 전극종, 전해질농도, 제거효율 등을 검토하였다. 백금전극 상에서 $0.67A/cm^2$의 전류밀도로 180~210 min 간 Fe(III)/Fe(II)와 Co(III)/Co(II) 전해환원계에서 매개전해산화에 의하여 폴리에틸렌글리콜류는 탄산가스로 분해되었다. 매개전해산화시 폴리에틸렌글리콜류의 제거효율은 Fe(III)/Fe(II) 산화환원계보다 Co(III)/Co(II) 산화환원계가 우수하였고 분자량이 1000, 4000, 20000인 폴리에틸렌글리콜류의 매개전해산화 제거효율은 100%이었다.

• 대한금속재료학회지
• /
• 제50권11호
• /
• pp.801-808
• /
• 2012

TiAlCN coatings with various C contents were synthesized by unbalanced magnetron sputtering. The characteristics, the crystalline structure, surface morphology, hardness, and friction coefficient of the coatings as a function of the C content were investigated by X-ray diffraction (XRD), atomic force microscopy (AFM), a microhardness tester, and a wear test. In addition, their corrosion behaviors in a deaerated 3.5 wt% NaCl solution at $40^{\circ}C$ were investigated by potentiodynamic polarization tests. The results indicated that the $Ti_{14.9}Al_{15.5}C_{30.7}N_{38.9}$ coating had the highest hardness, elastic modulus, and a plastic deformation resistance of 39 GPa, 359 GPa, and 0.55, respectively, and it also had the lowest friction coefficient of approximately 0.26. Comparative evaluation of the TiAlCN coatings indicated that a wide range of coating properties, especially coating hardness, could be obtained by the synthesis methods and processing variables. The microhardness of the coatings was much higher than that from previously reported coating using similar magnetron sputtering processes. It was almost as high as the microhardness measured from the TiAlCN coatings (~41 GPa) synthesized using an arc ion plating process. The potentiodynamic test showed that the corrosion resistance of the TiAlCN coatings was significantly better than the TiAlN coatings, and their corrosion current density ($i_{corr}$), corrosion potentials ($E_{corr}$) and corrosion rate decreased with an increasing C content in the coatings. The much denser microstructure of the coatings due to the increased amount of amorphous phase with increasing C contents in the coatings could result in the the improved corrosion resistance of the coatings.

• 공업화학
• /
• 제30권5호
• /
• pp.591-596
• /
• 2019

친환경 대체연료물질로서 ammonium dinitramide (ADN, $NH_4N(NO_2)_2$)는 상온에서 안전하고, 안정하지만 실제 적용을 위해서는 고순도가 요구된다. 소량의 불순물은 단일계 액상연료용 추력기 내 촉매의 분해반응을 억제하며, 비추력을 저하시키고, 노즐 막힘과 같은 부작용을 초래한다. 따라서 본 연구는 반복추출, 활성탄에 의한 흡착, 그리고 저온추출방법을 적용하여 합성한 ADN을 정제하였고, FT-IR, UV-Vis 및 IC 분석을 통하여 화학적인 순도를 평가하였으며, 최종 순도로서 IC 분석기준으로 99.82%를 획득하였다. 또한, ADN을 주 산화제로 활용하는 액상연료를 제조하였으며, 최소 $148^{\circ}C$에서 분해되는 단일계 추진제를 합성하였다. 그러나 상안정화를 위하여 우레아를 연료물질로 추가하였을 경우, 분해온도는 $188^{\circ}C$까지 상승하였다.

• 약학회지
• /
• 제52권3호
• /
• pp.172-175
• /
• 2008

Stable isotope ratio of carbon and nitrogen ($\delta^{13}C$ & $\delta^{15}N$), and $\Delta^{9}$-tetrahydrocannabinol (THC) contents were measured on 37 Korean cannabis and 10 commercial grade marijuana seized in Korea. Factors influencing on the measured values and their variations were investigated. $\delta^{13}C$ value of cannabis is specified mainly by water availability. Korean cannabis showed relatively low $\delta^{13}C$ values ranging -33.29$\sim$-27.01% (mean=-31.01%), which reflect geographic conditions of Korea where is rainy, especially during summer. $\delta^{15}N$ values, which reflect individual planting conditions, were relatively high up to -0.5$\sim$18.0% (mean=6.44%). It reflects characteristics of Korean cannabis growing wild in forest or cultivated in fertile soil. Tetrahydrocannabinol is the major hallucinogenic compound of cannabis. Ethanol extracts of cannabis leaves were derivatized by N,O-bis(trimethylsilyl)trifluoroacetamide (BSTFA), and the derivatives were analyzed by GC-MS in selected ion monitoring (SIM) mode. THC contents of Korean cannabis ranged 0.11$\sim$4.34% (mean=1.47%), which were relatively low compared with commercial grade marijuana.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2005년도 추계 학술대회
• /
• pp.193-196
• /
• 2005

Low resistance Ni thin films for using NiSi formation and metallization by atomic layer deposition (ALD) method have been studied. ALD temperature window is formed between $200^{\circ}C\;and\;250^{\circ}C$ with deposition rate of $1.25{\AA}$/cycle. The minimum resistance of deposited Ni films shows $4.333\;{\Omega}/\square$ on the $SiO_2/Si$ substrate by $H_2$ direct purging process. The reason of showing the low resistance is believed to be due to format ion of the $Ni_3C$ phase by residual carbon in Bis-Ni The deposited film exhibits excellent step coverage in the trench having 1(100 nm) : 16 (1.6 um) aspect ratio.

• Mass Spectrometry Letters
• /
• 제12권4호
• /
• pp.192-199
• /
• 2021

Alpine glaciers harbor a large quantity of bio-labile dissolved organic matter (DOM), which plays a pivotal role in global carbon cycling as glacial-fed streams are headwaters of numerous large rivers. To understand the complexity, origin, and fate of DOM in glaciers and downstream-linked streams and lakes, we elucidated the molecular composition of DOM in two different Tibetan Plateau glaciers, eight glacial-fed streams and five lakes, using an ultrahigh-resolution 15 Tesla Fourier transform ion cyclotron resonance (FT-ICR) mass spectrometer. The compositional changes of the DOM samples revealed that glacier DOM mostly exhibited sulfur-containing organic compounds (CHOS species). We also found that aliphatic formulae contributed more than 50% of the total abundance of assigned molecules in glacier samples, and those compounds were significantly related to CHOS species. The CHO proportions of glacial-fed streams and lakes samples increased with increasing distance from glacial terminals. The relative contribution of terrestrial-derived organics (i.e., lignins and tannins) declined while microbial-originated organics (aliphatics) increased with increasing elevation. This suggested the gradual input of allochthonous materials from non-glacial environment and the degradation of microbe-derived compounds along lower elevations. Alpine glaciers are retreating as a result of climate change and they nourished numerous streams, rivers, and downstream-linked lakes. Therefore, the interpretations of the detailed molecular changes in glacier ice, glacial-fed streams, and alpine lakes on the Tibetan Plateau could provide broad insights for understanding the biogeochemical cycling of glacial DOM and assessing how the nature of DOM impacts fluvial ecosystems.

• Journal of Microbiology and Biotechnology
• /
• 제31권4호
• /
• pp.570-583
• /
• 2021

Pyrococcus furiosus α-amylase can hydrolyze α-1,4 linkages in starch and related carbohydrates under hyperthermophilic condition (~ 100℃), showing great potential in a wide range of industrial applications, while its relatively low productivity from heterologous hosts has limited the industrial applications. Bacillus subtilis, a gram-positive bacterium, has been widely used in industrial production for its non-pathogenic and powerful secretory characteristics. This study was conducted to increase production of P. furiosus α-amylase in B. subtilis through three strategies. Initial experiments showed that co-expression of P. furiosus molecular chaperone peptidyl-prolyl cis-trans isomerase through genomic integration mode, using a CRISPR/Cas9 system, increased soluble amylase production. Therefore, considering that native P. furiosus α-amylase is produced within a hyperthermophilic environment and is highly thermostable, heat treatment of intact culture at 90℃ for 15 min was performed, thereby greatly increasing soluble amylase production. After optimization of the culture conditions (nitrogen source, carbon source, metal ion, temperature and pH), experiments in a 3-L fermenter yielded a soluble activity of 3,806.7 U/ml, which was 3.3- and 28.2-fold those of a control without heat treatment (1,155.1 U/ml) and an empty expression vector control (135.1 U/ml), respectively. This represents the highest P. furiosus α-amylase production reported to date and should promote innovation in the starch liquefaction process and related industrial productions. Meanwhile, heat treatment, which may promote folding of aggregated P. furiosus α-amylase into a soluble, active form through the transfer of kinetic energy, may be of general benefit when producing proteins from thermophilic archaea.