• 대한금속재료학회지
• /
• 제48권9호
• /
• pp.798-806
• /
• 2010

The effects of alloying elements and the cooling condition on the microstructure, tensile properties, and Charpy impact properties of high-strength bainitic steel plates fabricated by a controlled rolling process were investigated in the present study. Eight kinds of steel plates were fabricated by varying C, Cr, and Nb additions under two different cooling rates, and their microstructures and tensile and Charpy impact properties were evaluated. The microstructures present in the steels increased in the order of granular bainite, acicular ferrite, bainitic ferrite, and martensite as the carbon equivalent or cooling rate increased, which resulted in a decrease in the ductility and Charpy absorbed energy. The steels containing a considerable amount of bainitic ferrite or martensite showed very high strengths, together with good ductility and Charpy absorbed energy. In order to achieve the best combination of strength, ductility, and Charpy absorbed energy, granular bainite and acicular ferrite were properly included in the high-strength bainitic steels by controlling the carbon equivalent and cooling rate, while about 50 vol.% of bainitic ferrite or martensite was maintained to maintain the high strength.

• Journal of Forest and Environmental Science
• /
• 제36권2호
• /
• pp.91-112
• /
• 2020

In Ethiopia, dry land vegetation including the fairly intact lowland and western escarpment woodlands occupy the largest vegetation resource of the country. These forests play a central role in environmental regulation and socio-economic assets, yet they received less scientific attention than the moist forests. This study evaluated the woody plant species composition, population structure and carbon sequestration potential of the A. senegal woodland across three distance gradients from the settlements. A total of 45 sample quadrants were laid along a systematically established nine parallel transect lines to collect vegetation and soil data across distance gradients from settlement. Mature tree dry biomass with DBH>2.5 cm was estimated using allometric equations. A total of 41 woody plant species that belong to 20 families were recorded and A. senegal was the dominant species with 56.4 IVI value. Woody plant species diversity, density and richness were significantly higher in the distant plots compared to the nearest plots to settlement (p<0.05). The cumulative DBH class distribution of all individuals had showed an interrupted inverted J-shape population pattern. There were 19 species without seedlings, 15 species without saplings and 14 species without both seedlings and saplings. A significant above ground carbon (5.3 to 12.7 ton ha^-1), root carbon (1.6 to 3.6 ton ha^-1), soil organic carbon (35.6 to 44.5 ton ha^-1), total carbon stock (42.5 to 60.7 ton ha^-1) and total carbon dioxide equivalent (157.7 to 222.8 ton ha^-1) was observed consistently with an increasing of distance from settlement (p<0.05). Distance from settlement had significant and positive correlation with species diversity and carbon stock at 0.64^⁎⁎ and 0.78^⁎⁎. Disturbance intensity may directly influence the variation of species composition, richness and density along the A. senegal woodland. The sustainability of the A. senegal woodland needs urgent protection, conservation and restoration.

• Journal of Korean Biological Nursing Science
• /
• 제16권3호
• /
• pp.173-181
• /
• 2014

Purpose: The purpose of this study was to analyze the effects of a quit smoking program using the Web and short message service on exhaled carbon monoxide, self-efficacy, and depression according to nicotine dependency level in undergraduate students. Methods: In this study a non-equivalent control group pretest-posttest design was applied. The participants included 90 students (52 in the low nicotine dependency group and 38 in the high nicotine dependency group) who succeeded in quitting smoking. Data were collected on 3 occasions, that is, before the program, immediately after the program, and 3 weeks after the program. Collected data were analyzed using independent t-test, repeated measure ANOVA, and paired t-test with SPSS 20.0. Results: Exhaled carbon monoxide was higher in the high nicotine dependency group than in the low nicotine dependency group. Self-efficacy significantly increased 3 weeks after the program in the low nicotine dependency group and significantly increased immediately after the program in the high nicotine dependency group. Depression significantly decreased 3 weeks after the program in the low nicotine dependency group. Conclusion: Self-efficacy may be enhanced when it is dealt with during an early phase of the quit smoking program for the high nicotine dependency group. Long-term intervention and persistent intervention are needed with regard to depression during a quit smoking program.

• International Journal of Safety
• /
• 제6권2호
• /
• pp.1-7
• /
• 2007

In this study mechanical strength of A53B carbon steel was analyzed using several types of test specimens directly machined from oil recycling pipe experienced a failure due to hydrogen attack in chemical plants. High temperature hydrogen attack (HTHA) is the damage process of grain boundary facets due to a chemical reaction of carbides with hydrogen, thus forming cavities with high pressure methane gas. Driven by the methane gas pressure, the cavities grow on grain boundaries forming intergranular micro cracks. Microscopic optical examination, tensile test, Charpy impact test, hardness measurement, and small punch (SP) test were performed. Carbon content of the hydrogen attacked specimens was dramatically reduced compared with that of standard specification of A53B. Traces of decarburization and micro-cracks were observed by optical and scanning electron microscopy. Charpy impact energy in hydrogen attacked part of the pipe exhibited very low values due to the decarburization and micro fissure formation by HTHA, on the other hand, data tested from the sound part of the pipe showed high and scattered impact energy. Maximum reaction forces and ductility in SP test were decreased at hydrogen attacked part of the pipe compared with sound part of the pipe. Finite element analyses for SP test were performed to estimate tensile properties for untested part of the pipe in tensile test. And fracture toughness was calculated using an equivalent strain concept with SP test and finite element analysis results.

• Journal of Forest and Environmental Science
• /
• 제34권2호
• /
• pp.165-168
• /
• 2018

Mt. Bongeui is a neighborhood park of 66.4 ha as a major natural landscape resource located in the center of Chuncheon City. This study quantified the reduction of carbon, $SO_2$, $NO_2$, $O_3$, and $PM_{2.5}$, and the production of $O_2$ to explore the role for Mt. Bongeui to contribute to annual atmospheric purification. The main forest types and age classes of the study site included age-class III broadleaved forest at 35.8%, age-class VI coniferous forest at 17.2%, and age-class IV broadleaved forest at 15.7%. The annual atmospheric purification effect per unit area was as follows: 7.6 t carbon/ha/yr, 16.6 kg $SO_2/ha/yr$, 40.4 kg $NO_2/ha/yr$, 41.5 kg $O_3/ha/yr$, 53.7 kg $PM_{2.5}/ha/yr$, and 20.2 t $O_2/ha/yr$. The economic value of these effects was equivalent to about 12.9 million KRW/ha/yr. The study site annually offset carbon emissions of about 300 citizens, $SO_2$ emissions of 220 citizens, and $NO_2$ emissions of 92 citizens in Chuncheon. It also played an important role in annually producing 1.5% of the amount of $O_2$ necessary for the respiration of Chuncheon's total population. This study pioneers in comprehensively quantifying the atmospheric purification effect and could be useful in guiding the planning and management to improve the effect.

• 대한화학회지
• /
• 제33권6호
• /
• pp.657-661
• /
• 1989

팔라듐 촉매를 이용한 vinylmercuric chlorides의 CO 첨가반응과 커플링반응을 동시에 진행시키는 CO 첨가 호모커플링반응을 실시하여 대칭 디비닐케톤 또는 디비닐 ${\alpha}$-디케톤을 비교적 좋은 수득율로 얻었다. 디비닐케톤과 디비닐 ${\alpha}$-디케톤의 최적 합성조건을 규명하기 위하여 여러가지 vinylmercuric chlorides의 대표적인 모델로서 (E)-styrylmercuric chloride를 선택하여 촉매의 종류 및 그의 양, 염기, 용매 및 반응온도 등의 조건에 따른 수득율의 변화를 조사하였다. 촉매로 10mol%의 dichlorobis(triphenylphosphine)palladium(II), 염기로 등몰의 Pyridine, 10mol%의 요오드 및 10기압의 일산화탄소 존재하에, acetonitrile 용매 중 50${\circ}$C에서 반응시켜 가장 좋은 수득율로 디비닐 ${\alpha}$-디케톤이 얻어졌으며, 상압의 일산화탄소와의 반응에서는 낮은 수득율로 디비닐 ${\alpha}$-디케톤을 얻었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.597-598
• /
• 2005

Recently, the performance of portable electric equipment can often improved by a Li-ion battery assisted by a supercapacitor. A supercapacitor can provide high power density as well as a low resistance in the hybrid system. In this study, we have prepared, as the pluse power souce, a commercially supplied Li-ion battery with a capacity of 700mAh and AC resistivity of $60m\Omega$ at 1kHz and nonaqeous asymmetric hybrid capacitor composed of an activated carbon cathode and MCMB anode, and have examined the electrochemical characteristics of hybrid capacitor and the pulse performances of parallel connected battery/hybrid capacitor source. The nonaqueous asymmetric hybrid capacitor, the stacks of 10 pairs of the cathode, the porous separator and the anode electrode were housed in Al-laminated film cell. The hybrid capacitor, which was charged and discharged at a constant current at $0.25mA/cm^2$ between 3 and 4.3V, has exhibited the capacitance of 100F. And the equivalent series resistance was $32m\Omega$ at 1kHz. By combining a Li-ion battery and a hybrid capacitor, the pulse performance of battery can be improved 23% in run time under a pulse discharge of 7C-rate.

• 한국습지학회지
• /
• 제8권3호
• /
• pp.39-49
• /
• 2006

Seasonal biomass and carbon, nitrogen contents change of marsh club-rush (Schoenoplectus trigueter) was investigated in Nakdong river estuary, located near Busan, Korea. New shoot of S. trigueter sprouted from tuber in April and fast growth season was followed until mature in August. Mature lengths of shoot and root were 60 and 9.4 cm, respectively. The increase of biomass showed similar seasonal trends with length. Mature biomass were $3.5gind^{-1}$ in wet weight and $0.6gind^{-1}$ in dry weight. The biomass of S. trigueter in areal basis was also highest during July and August ($186gDWm^{-2}$). The shoot of S. trigueter was disappeared in October from the ground but the biomass of shoot was maintained as a form of detritus in sediment. The amount of S. trigueter detritus was about 30~50% of the biomass in August. During winter, the amount of detritus decreased with time but the biomass of root+tuber remained same, implying the root+tuber part is alive. The net productivity of S. trigueter estimated from biomass change were $538gDWm^{-2}yr^{-1}$, $240g-Cm^{-2}yr^{-1}$, $8.2g-Nm^{-2}yr^{-1}$ in dry weight, carbon and nitrogen equivalent respectively. During winter, carbon to nitrogen ratio in detritus increased implying the preferred remineralization of nitrogen during microbial degradation.

• Advances in nano research
• /
• 제14권3호
• /
• pp.211-224
• /
• 2023

This work presents a modified analytical model for the bending behavior of axially functionally graded (AFG) carbon nanotubes reinforced composite (CNTRC) nanobeams. New higher order shear deformation beam theory is exploited to satisfy parabolic variation of shear through thickness direction and zero shears at the bottom and top surfaces.A Modified continuum nonlocal strain gradient theoryis employed to include the microstructure and the geometrical nano-size length scales. The extended rule of the mixture and the molecular dynamics simulations are exploited to evaluate the equivalent mechanical properties of FG-CNTRC beams. Carbon nanotubes reinforcements are distributed axially through the beam length direction with a new power graded function with two parameters. The equilibrium equations are derived with associated nonclassical boundary conditions, and Navier's procedure are used to solve the obtained differential equation and get the response of nanobeam under uniform, linear, or sinusoidal mechanical loadings. Numerical results are carried out to investigate the impact of inhomogeneity parameters, geometrical parameters, loadings type, nonlocal and length scale parameters on deflections and stresses of the AFG CNTRC nanobeams. The proposed model can be used in the design and analysis of MEMS and NEMS systems fabricated from carbon nanotubes reinforced composite nanobeam.

• Advances in concrete construction
• /
• 제10권1호
• /
• pp.35-48
• /
• 2020

This paper deals with a comparative study among three different rehabilitation techniques, namely, (i) carbon fibre reinforced polymer (CFRP), (ii) glass fibre reinforced polymer (GFRP) and (iii) ferrocement on the flexural strengthening of reinforced cement concrete (RCC) beams. As these different techniques have to be compared on a level playing field, tensile coupon tests have been carried out initially for GFRP, CFRP and ferrocement and the number of layers required in each of these composites in terms of the tensile strength. It was found that for the selected constituents of the composites, one layer of CFRP was equivalent to three layers of GFRP and five layers of wiremesh reinforcement in ferrocement. Rehabilitation of RCC beams using these equivalent laminates shows that all the three composites performed in a similar way and are comparable. The parameters selected in this study were (i) the strengthening material and (ii) the level of pre-distress induced to the beams prior to the rehabilitation. It was noticed that, as the levels of pre-distress decreases, the percentage attainment of flexural capacity and flexural stiffness of the rehabilitated beams increases for all the three selected composites used for rehabilitation. Load-deflection behavior, failure modes, energy absorption capacity, displacement ductility and curvature ductility were compared among these composites and at different distress levels for each composite. The results indicate that ferrocement showed a better performance in terms of ductility than other FRPs, and between the FRPs, GFRP exhibited a better ductility than the CFRP counterpart.