• Journal of Korean Society of Steel Construction
• /
• v.17 no.3 s.76
• /
• pp.365-373
• /
• 2005

There is increasing need for high-strength steel especially for the high-rise steel building structure. High- strength steels, however, may have mechanical properties that are significantly different from those of the conventional steels.The application of high-strength steels to building structures should be reviewed as to whether inelastic behavior equivalent to that of conventional steels can be attained or not. In this study, SM570TMC steel, which was developed recently in Korea, was tested to evaluate mechanical properties and welding characteristics for use as a structural steel. Yield phenomenon of SM570TMC steel, which is continuous yielding, is quite different from that of conventional steel. The distributions of yield strength of SM570TMC steel were uniform regardless of thickness, while the minimum yield strength was 440MPa. Also, the flat distributions of hardness in z-direction were found to comprise one of the important properties. Results of the charpy impact tests at -5oC revealed toughness values of SM570TMC steel, which were higher than those of equivalent as rolled steel. Carbon equivalent(Ceq) values of SM570TMC steel, which were related to welding performance, were lower than those of equivalent as rolled steel.

• Journal of the Korean Institute of Gas
• /
• v.4 no.2 s.10
• /
• pp.27-32
• /
• 2000

In this study, $Mn_3O_4$ was synthesized by the different equivalent ratios using solution of $MnCL_2 {\cdot} 4H_2O$ and NaOH. We have investigated the crystal structure and surface area by XRD, BET Method, studied on the decompositon and adsorption of carbon dioxide with synthesized $Mn_3O_4$. As the results, we surveyed that main peak was $Mn_3O_4$, some Peaks were $MnO_2$ and $Mn_5O_8$ The specific surface area was ranged from $13.92m^2/g$ to $32.33m^2/g$. The decomposition of $CO_2$ was observed by the differential equivalent ratios at $450^{\circ}C$. $CO_2$ was well decomposed at equivalent ratio of 0.75. The amount of chemisorption of $CO_2$ was ranged from 2.885 to 19.628cc/g. Optimal equivalent ratio was 1.00 for the chemisorption of $CO_2$.

• Journal of the Korean Chemical Society
• /
• v.56 no.6
• /
• pp.700-705
• /
• 2012

The present study is to explore the possibility of utilizing loess and fly ash as well as activated carbon for the adsorptive removal of T-N and T-P in water. Here, we investigated adsorption efficiency and Freundlich constants k and 1/n of each adsorbent. It was found that fly ash has not adsorptive capability for both T-N and T-P in water. Adsorption of T-N from water by loess has not occurred, but showed that adsorption efficiency for T-P reached approximately 57.5% at equilibrium time of 24 hr and room temperature. Activated carbon was shown to be an effective adsorbent for adsorption of T-N from water. Freundlich constant 1/n value of activated carbon represented that adsorptive capability of activated carbon is almost equivalent to loess.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.26 no.1
• /
• pp.23-27
• /
• 2016

This study investigates the effect of carbon fiber sheet (CFS) and carbon fiber strand sheet (CFSS) on the fatigue resistance and compressive strength of RC slabs. The results of a comparison of the number of equivalent cycles between the CFS- and CFSS-reinforced RC slab test specimens obtained from a fatigue test indicate that the CFSS-reinforced RC slab has 1.2~1.3 times greater effect of reinforcement than the CFS-reinforced RC slab. This study also indicates that the fatigue resistance of the CFS- and CFSS-reinforced RC slabs is ensured when the compressive strength of concrete is not lower than the specified design strength prescribed in the Specifications for Highway Bridges but is not ensured when the compressive strength of concrete is lower than the specified design strength, although the effect of reinforcement is secured.

• Journal of Forest and Environmental Science
• /
• v.33 no.2
• /
• pp.79-90
• /
• 2017

Improving the urban environmental quality relies mainly on the increasing of urban forests capacity to store carbon dioxide. This study assesses the floristic diversity of urban institutional lands in Bukavu and their potential to reduce atmospheric $CO_2$. An exhaustive inventory over three sites ($Coll{\grave{e}}ge$ Alfajiri, $Cath{\acute{e}}drale$ Notre-Dame de la Paix and Institut $Sup{\acute{e}}rieur$ $P{\acute{e}}dagogique$) of Bukavu led to the identification of 1,113 trees of which the diameter at breast height (1.30 m) ranged from 4.9 to 161 cm. Results reveal a floristic diversity made up of 4 families of conifers with 4 species and 14 of broadleaves with 21 species. Average densities were of $54trees\;ha^{-1}$ and $5.21m^2\;ha^{-1}$ of basal area. Urban-based allometric equations used yielded up to 312.8 tons of carbon stored in trees aboveground biomass equivalent to 1,147.9 tons of $CO_2$ reduced from the atmosphere over the three sites. The rate of carbon storage reaches $15.1tons\;ha^{-1}$. Thus, trees of the three institutional sites in Bukavu play an important role in reducing atmospheric $CO_2$ and contribute, thereby, to mitigate global climate change effects. Given the current environmental challenge associated with high population growth rate in cities, the urban forest ecosystem in DRC requires to be extended and further investigation.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.11
• /
• pp.1030-1037
• /
• 2010

This study suggests the riparian area management measures that can control nonpoint source pollution and optimal carbon sequestration. 30~600 m ranges of riparian buffer width are estimated for controlling diffused pollutants in Nakbon K watershed in the Nakdong River. The area that can be easily restored to the riparian buffer zone considering current land use type is the 1,776.51 ha and it is the 50% of estimated buffer area. About 14,526 tC/yr, 11,826 tC/yr, 8,382 tC/yr and 3,349 tC/yr of carbon can be sequestered in the restoration of riparian buffer zone with broad leaved forest, mixed forest, coniferous forest and perennial grass, respectively. It is equivalent amount of carbon dioxide that emitted from 5,000 cars or 20,000 homes as a family of four.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.3
• /
• pp.60-67
• /
• 2021

Recently, research attention has been focused on vibration-free vehicles to transport small numbers of expensive electronic products. Vibration-free vehicles can be used to transport expensive test equipment or semiconductors, mainly produced in the domestic IT industry, and can serve as a readily available transportation system for short driving distances due to the increased efficiency on narrow national highways. This study was aimed at developing a Z-Spring to minimize the vibration by installing an air spring instead of the plate spring applied to conventional freight cars and to prevent the damage of the loaded cargo from the shock occurring during movement. The mechanical properties (elastic modulus, tensile strength, and shear strength) of carbon fiber (CF) and glass fiber (GF) prepreg were derived, and ANSYS ACP PrepPost analyses were performed. It was observed that in the case of hybrid composites, the total deformation and equivalent stress are higher than that of CFRP; however, in terms of the unit cost, the hybrid Z-Spring is more inexpensive and durable compared to the GF.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.8
• /
• pp.891-898
• /
• 2008

In this paper, we have studied on the possibilities of the biomaterial detection using single-walled carbon nanotube (SWNT) based on interdigital capacitors. For the four different configurations, such as interdigital capacitor, SWNT in the $5\;{\mu}m$ gap interdigital capacitor, biotinlated SWNT, and biotin and sreptavidin immobilization cases, the resonant frequency has been measured as 10.02 GHz, 11.02 GHz, 10.82 GHz, and 10.22 GHz, respectively. Assuming that the resonant frequency reflects the capacitance changes due to binding of two-different permittivity biomaterials, we have suggested an equivalent circuit model based on measured results, confirming the capacitance changes. For biotinlated SWNT and biotin-streptavidin immobilization cases, the capacitances are $C_b=0.55\;pF$ and $C_s=0.95\;pF$. In this work, we experimentally demonstrated that the specific biomaterial binding causes the capacitance change and therefore this gives rise to resonant frequency. In conclusion, we confirmed the sufficient possibility as CNT biosensor because an analyte biomaterial(streptavidin) binding arouses a considerable resonant frequency change.

• Journal of Soil and Groundwater Environment
• /
• v.12 no.2
• /
• pp.47-54
• /
• 2007

The partitioning tracer method has been studied as an alternative method for detecting and characterizing the distribution of nonaqueous phase liquids (NAPLs) contaminants in subsurface. The reliability of the partitioning tracer method depends on accurate measurements of partition coefficients of the partitioning tracers between water and NAPLs. In this study, partition coefficients of several alcohol tracers between water and benzene, toluene, ethylbenzene, xylene, and BTEX mixtures are estimated using the modified approach of equivalent alkane carbon number (EACN). Agreements between the measured and estimated partition coefficients were generally observed in experiments. Based on these results, it is confirmed that the partition coefficients of tracers are readily obtained without experiments if the EACN values for the tracers and LNAPLs are known.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.625-628
• /
• 2008

This study is performed to evaluate the carbonation resistance by measuring carbonation penetration depth and diffusion equivalent air layer thickness for 3 types of repair materials and 2 types of surface protection materials. Diffusion equivalent air layer thickness($S_D$) is thickness of a static air layer that possesses, under the same conditions, the same carbon dioxide permeability as the coating in accordance BS EN 1062-6. There is a significant advantage that continuous test is possible because it does not destroy the specimen. From experiment results, it is concluded that determination of carbon dioxide permeability is effective to evaluate for surface coating materials.