• 한국대기환경학회지
• /
• 제25권4호
• /
• pp.316-324
• /
• 2009

Carbon based sorbents for $CO_2$ adsorption were prepared by impregnation with alkali metals ($Li^+$, $K^+$) and alkaline earth metals ($Ca^{2+}$, $Mg^{2+}$). BET surface area of test sorbents was lower than the intrinsic activated carbon. In particular, impregnation of $Ca^{2+}$ or $Mg^{2+}$ resulted in lower surface area of specific adsorption sites than that of $Li^+$ or $K^+$. While the adsorption capacity for $CO_2$ was high in the sorbents containing $Ca^{2+}$ and $Mg^{2+}$, strong interaction with $CO_2$ would cause to drop the capacity after regeneration. The adsorption was found high relatively in the flow with a high concentration of $CO_2$ and in a low flow rate. The adsorption isotherm for the present modified AC sorbents fits well with the Freundlich model.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.113.2-113.2
• /
• 2010

We report that the novel covalent organic frameworks (COFs) are capable of reversibly providing an extremely high uptake capacity of carbon dioxide and hydrogen at room temperature. These COFs are designed based on the multiscale simulations approach via the combination of ab initio calculations and force-field calculations. For this goal, we explore the adsorption sites of carbon dioxide and hydrogen on COFs, their porosity, as well as carbon dioxide adsorption isotherms. We identify the binding sites and energies of $CO_2$ on COFs using ab initio calculations and obtain the carbon dioxide adsorption isotherms using grand canonical ensemble Monte Carlo calculations. Moreover, the calculated adsorption isotherms are compared with the experimental values in order to build the reference model in describing the interactions between the $CO_2/H_2$ and the COFs and in predicting the $CO_2$ and $H_2$ adsorption isotherms of COFs. Finally, we design three new COFs, 2D COF-05, 3D COF-05 (ctn), and 3D COF-05 (bor), for the high capacity $CO_2/H_2$ and $H_2$ storage.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.164-165
• /
• 2022

In order to solve problems such as acceleration of resource use and environmental pollution, experiments were conducted with the aim of producing indoor finishing materials that can adsorb fine dust and carbon dioxide using gelite and polymer, which are porous materials. Based on the previous experiment, gelite was substituted at each level in a matrix having a polymer S738P substitution rate of 12.5%, and the results are as follows. As the substitution rate of gelite increased, the amount of fine dust and carbon dioxide adsorption increased, which is believed to be due to physical adsorption due to the high porosity of gelite. However, further experiments are needed as the overall adsorption amount is not high due to the filling inside the matrix due to the polymer.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.544-547
• /
• 2011

Carbon dioxide concentration of railroad passenger cabin is obliged to be kept lower than guideline values of 'Indoor air quality guideline for public transportations', but actual carbon dioxide concentration frequently exceeds this guideline value. Ventilation is most desirable to lower carbon dioxide concentration but there are some cases when the ventilation is not applicable. In this study, carbon dioxide concentration control method using adsorbents was presented. Base and zeolites, good adsorbents of carbon dioxide, were mixed and palletized. Carbon dioxide adsorption performance of this adsorbents were studied. It was found that base-modified zeolites adsorbed carbon dioxide better than zeolites only.

• Bulletin of the Korean Chemical Society
• /
• 제35권1호
• /
• pp.57-61
• /
• 2014

In this study, carbon aerogel (CA) was synthesized using a soft-template method, and the optimum conditions for the adsorption of carbon dioxide ($CO_2$) by the carbon aerogel were evaluated by controlling the activation temperature. KOH was used as the activation agent at a KOH/CA activation ratio of 4:1. Three types of activated CAs were synthesized at activation temperatures of $800^{\circ}C$(CA-K-800), $900^{\circ}C$(CA-K-900), and $1000^{\circ}C$(CA-K-1000), and their surface and pore characteristics along with the $CO_2$ adsorption characteristics were examined. The results showed that with the increase in activation temperature from 800 to $900^{\circ}C$, the total pore volume and specific surface area sharply increased from 1.2165 to $1.2500cm^3/g$ and 1281 to $1526m^2/g$, respectively. However, the values for both these parameters decreased at temperatures above $1000^{\circ}C$. The best $CO_2$ adsorption capacity of 10.9 wt % was obtained for the CA-K-900 sample at 298 K and 1 bar. This result highlights the importance of the structural and textural characteristics of the carbon aerogel, prepared at different activation temperatures on $CO_2$ adsorption behaviors.

• 공업화학
• /
• 제19권5호
• /
• pp.533-538
• /
• 2008

본 연구는 상용 제올라이트와 석탄회를 알칼리 양이온(Li, K)과 알칼리 토금속(Ca, Mg)을 이용하여 화학적으로 개질하여 이산화탄소의 흡착능을 향상시키고자 하였다. Ca와 Mg를 함유한 흡착제의 경우 비표면적이 낮게 나타났으나, 전반적으로 뚜렷한 차이는 보이지 않았다. 양이온에 따른 흡착능은 K < Li < Mg < Ca 순으로 증가하는 경향을 나타내었다. Ca와 Mg로 함침된 흡착제의 경우 재생 효율이 가장 낮은 것으로 나타났다. 이는 Ca와 Mg 이온이 이산화탄소와의 친화력이 높기 때문이다. 이러한 양이온과 이산화탄소 분자 사이의 친화력은 이산화탄소에 대한 선택도를 증가시켜 줄 것으로 판단된다.

• 에너지공학
• /
• 제13권2호
• /
• pp.166-172
• /
• 2004

The activated carbon was produced from Sancheong bamboo by steam and carbon dioxide gas activation methods. The carbonization of raw material was conducted at 90$0^{\circ}C$ and gas activation reactions were conducted with respect to various conditions. -activation temperature 750-90$0^{\circ}C$, the flow rate of steam 0.5-2g-$H_2O$/g-char$.$hr, the flow rate of carbon dioxide 5-30$m\ell$-$CO_2$/g-char-min and activation time 1-5 hr. The prepared activated carbons were measured yield, the adsorption capacity of iodine and methylene blue, BET specific surface area and pore size distribution. The adsorption capacity of iodine (680.5-1526.1 mg/g) and methylene blue (18.3-221.5 mg/g) increased with creasing activation temperature and activation time. The adsorption capacity of iodine and methylene blue increased with the activation gas quantity in the range of 0.5-1.5g-$H_2O$/g-charㆍhr, 5-18.9$m\ell$-Co$_2$/g-charㆍmin. But those decreased over those range due to the pore shrinkage. The steam activation method was superior in efficiency to carbon dioxide activation method.

• Carbon letters
• /
• 제18권
• /
• pp.62-66
• /
• 2016

• Carbon letters
• /
• 제7권1호
• /
• pp.9-18
• /
• 2006

Activated carbons were obtained by activating wild cherry stones with different concentrations of phosphoric acid or zinc chloride at different temperatures. The adsorption of $N_2$ at 77 K and of $CO_2$ at 273 K was followed and the data were analyzes by considering different adsorption models. The activated carbons obtained measured high surface area with the most of the surface in all samples located in micropores. Fair agreement was found between the nitrogen surface areas calculated from the BET-, t-, ${\alpha}$- and DR- methods, although the first three are based on surface coverage whereas the latter is based on micropore filling. The carbon dioxide surface areas calculated by the DA equation were smaller than the comparable nitrogen areas. This was ascribed to domination of surface coverage mechanism, the absence of activated diffusion process. Based on this explanation the $CO_2$-surface areas as calculated by DA equation should be taken with great reservation.

• 청정기술
• /
• 제17권4호
• /
• pp.389-394
• /
• 2011

바이오가스로부터 이산화탄소와 질소를 제거하기 위한 흡착공정은 많이 논의되고 있다. 특히 흡착공정 중에서 압력변동흡착(Pressure swing adsorption)공정은 에너지소모가 적고 가격이 경제적이기 때문에 기체의 분리와 정제를 위한 공정으로 적절하다. 물리적 흡착을 사용하는 PSA공정은 흡착과 탈착이 가능하다. 각 cycle단계의 구성은 가압, 주입 및 흡착, 압력 균등화, 감압 및 세정으로 이루어져있다. 본 실험에서 PSA공정은 이산화탄소와 질소를 제거하기 위한 흡착제로 zeolite 13X와 carbon molecular sieve (CMS)로 구성되어 있으며, 혼합 가스의 농도는 $CH_4/CO_2/N_2$ (75:21:4 vol%)의 비율을 갖고 있다. 각각 zeolite 13X와 CMS는 선택적으로 혼합가스로부터 질소와 이산화탄소를 흡착하여 분리하고 제거한다. 또한 CMS의 경우는 빠르게 분산되는 이산화탄소의 처리량이 높다. 상부탱크, 하부탱크, 주입탱크의 가스 조성은 TCD 검출기를 이용하는 gas chromatography (GC)에 의해서 측정되었다.