• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.164-165
• /
• 2019

Light-weight foamed concrete using cement as a raw material consumes a lot of energy and generates $CO_2$ because of the high temperature firing process in the manufacturing process of cement. This study was carried out to evaluate the use of blast furnace slag through the properties analysis by substituting a certain amount of blast furnace slag as an industrial by-product as a substitute for cement. The experimental results showed similar characteristics to those of using only cement when the blast furnace slag fine powder was used in an appropriate amount. Therefore, if a certain amount of cement is replaced with blast furnace slag powder, it can maintain similar quality, reduce natural resources and energy consumption, and reduce carbon dioxide emissions.

• Journal of Environmental Science International
• /
• v.11 no.8
• /
• pp.773-781
• /
• 2002

The natural carbon cycle has been perturbed since the mid-19th century by anthropogenic CO$_2$emissions from fossil fuel combustion and deforestation due to population growth and industrialization. The current study simulated the global carbon cycle for the past 42 years using an eight-box carbon cycle model. The results showed that since the terrestrial biospheric carbon sink was roughly offset by the deforestation source, the fossil fuel emission source was partitioned between the atmospheric and oceanic sinks. However, the partitioning ratio between the atmosphere and the ocean exhibited a change, that is, the carbon accumulation rate was faster in the atmosphere than in the ocean, due to a decrease in the so-called ocean buffering capacity. It was found that the ocean buffering capacity to take up excess CO$_2$decreased by 50% in terms of the buffer factor over the past 42 years. Accordingly, these results indicate that if the current CO$_2$emission trend continues, the future rate of increase in the atmospheric CO$_2$concentration will accelerate.

• Economic and Environmental Geology
• /
• v.54 no.6
• /
• pp.733-741
• /
• 2021

Globally, in accordance with the goals set forth in the 2015 Paris Climate Agreement, each country has established and declared a reduction target for carbon neutrality by 2050. The roadmaps for establishing long-term greenhouse gas emissions development strategies and setting reduction targets have been announced. As the international community accelerates the transition to the net-zero society, 128 countries have declared net-zero by the end of 2020, and the net-zero declaration continues to expand around G20 member states. In December 2020, Korea announced the "2050 Net-zero Strategy" to establish a foundation for simultaneously achieving carbon reduction, economic growth, and improved quality of life for the people through active response to the net-zero, and pursuing policy tasks in stages to do this. Comprehensive carbon management is insufficient due to the lack of comprehensive carbon management due to the departure from the areas of mandatory reduction, such as the GHG energy target management system and the GHG emissions trading offset system implemented to reduce greenhouse gases in Korea. Currently, there is no cases for estimation or calculation of carbon dioxide emissions for the Mine Reclamation projects. It is reviewed the standard methods proposed by domestic and foreign carbon emission calculation methods and proposed appropriate carbon emission estimation methods for the Mine Reclamation projects in this study.

• Environmental Engineering Research
• /
• v.22 no.3
• /
• pp.302-311
• /
• 2017

Nowadays, with the burgeoning development of economy, $CO_2$ emissions increase rapidly in China. It has become a common concern to seek effective methods to forecast $CO_2$ emissions and put forward the targeted reduction measures. This paper proposes a novel hybrid model combined principal component analysis (PCA) with regularized extreme learning machine (RELM) to make $CO_2$ emissions prediction based on the data from 1978 to 2014 in China. First eleven variables are selected on the basis of Pearson coefficient test. Partial autocorrelation function (PACF) is utilized to determine the lag phases of historical $CO_2$ emissions so as to improve the rationality of input selection. Then PCA is employed to reduce the dimensionality of the influential factors. Finally RELM is applied to forecast $CO_2$ emissions. According to the modeling results, the proposed model outperforms a single RELM model, extreme learning machine (ELM), back propagation neural network (BPNN), GM(1,1) and Logistic model in terms of errors. Moreover, it can be clearly seen that ELM-based approaches save more computing time than BPNN. Therefore the developed model is a promising technique in terms of forecasting accuracy and computing efficiency for $CO_2$ emission prediction.

• Clean Technology
• /
• v.17 no.3
• /
• pp.191-200
• /
• 2011

Natural polymers, biopolymers, and synthetic polymers based on renewable resources are the basis for the 21th portfolio of sustainable and eco-friendly plastics but high-volume consumable plastics continue to be dominated by nondegradable petroleum-based materials. Three factors have recently made biodegradable polymers economically attractive: (i) rising costs of petroleum production resulting from the depletion of the most easily accessible reserves, (ii) environmental and economic concerns associated with waste plastics, and (iii) emissions of carbon dioxide from preparation of petroleum-based materials. These pressures have driven commercial applications based on biodegradable polymers which are related to reduction of carbon dioxide in processing, such poly(hydroxy alkanoate) and poly (lactide). Since initial degradation of these polymers leads to catastrophic mechanical failure, it is necessary to control the rate of initial degradation for commercial applications. In this article, we have a critic review on the recent progress of polymer modification for the control of degradation.

• Journal of Soil and Groundwater Environment
• /
• v.27 no.2
• /
• pp.41-49
• /
• 2022

To abate the environmental burdens arising from CO₂ emissions, biochar offers a strategic means to sequester carbons due to its recalcitrant nature. Also, biochar has a great potential for the use as carbon-based adsorbent because it is a porous material. As such, developing the surface properties of biochar increases a chance to produce biochar with great adsorption performance. Given that biochar is a byproduct in biomass pyrolysis, characteristics of biochar are contingent on pyrolysis operating parameters. In this respect, this work focused on the investigation of surface properties of biochar by controlling temperature and reaction medium in pyrolysis of pine sawdust as case study. In particular, CO₂ was used as reaction medium in pyrolysis process. According to pyrolytic temperature, the surface properties of biochar were indeed developed by CO₂. The biochar engineered by CO₂ showed the improved capability on CO₂ sorption. In addition, CO₂ has an effect on energy recovery by enhancing syngas production. Thus, this study offers the functionality of CO₂ for converting biomass into engineered biochar as carbon-based adsorbent for CO₂ sorption while recovering energy as syngas.

• Journal of Environmental Policy
• /
• v.12 no.4
• /
• pp.45-69
• /
• 2013

This study estimates baseline greenhouse gas emissions from transport sector when a new town is developed. It has adopted a general greenhouse gas estimation model developed by Schipper, celine, Roger(2000) for the estimation, and showed how various transport related statistics can be utilized in detail. Particularly, it has produced unit greenhouse gas emission factor per vehicle types, vehicle-km, and trip-km. To evaluate effects of greenhouse gas reduction policies, it has calculated how much emissions will be reduced from bicycle promotion. It has turned out that about 369 thousand tons of carbon dioxide will be emitted from transport sector once the 1st Geomdan New Town is developed in Incheon metropolitan city. If the policy of bicycle promotion can attract people to use bicycle as much as 5% of total trips, then it can reduce about 1,869 tons of carbon dioxide.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.2
• /
• pp.207-212
• /
• 2012

The effects of sheep urine and dung patches on methane ($CH_4$) and carbon dioxide ($CO_2$) fluxes were investigated during the summer-autumn in 2010, to evaluate their contribution to climate change in a desert grassland in Inner Mongolia, China. Results indicate that the cumulative $CH_4$ emissions for dung patches, urine patches and control plots were -0.076, -0.084, and -0.114 g/$m^2$ and these were net $CH_4$ sinks during the measured period. The level of $CH_4$ intake from urine and dung plots decreased 25.7%, and 33.3%, respectively, compared with a control plot. $CO_2$ fluxes differed (p<0.01) in urine plots, with an average of 569.20 mg/$m^2$/h compared with control plots (357.62 mg/$m^2$/h) across all sampling days. Dung patches have cumulative $CO_2$ emissions that were 15.9% higher compared with the control during the 55-d period. Overall, sheep excrement weakened $CH_4$ intake and increased $CO_2$ emissions.

• Korean Chemical Engineering Research
• /
• v.50 no.6
• /
• pp.1008-1014
• /
• 2012

The amount of domestic carbon dioxide emissions is more than 600 million tons/year. The emitted $CO_2$ should be captured and stored, however, suitable storage sites have not been found yet. A lot of researches on the conversion of captured carbon dioxide to useful carbon source have been conducted. The purpose of this study is to convert stable carbon dioxide to useful resources using less energy. For this purpose reducing gas and metallic oxide (activator) are required. Hydrogen was used as reducing gas and cobalt ferrite was used as activator. Considering that activator has different physical properties depending on synthesis methods, activator was prepared by hydrothermal synthesis and solid method. Decomposition characteristics of carbon dioxide were investigated using synthesized powders. Temperature programmed reduction/oxidation (TPR/TPO) and thermogravimetric analyzer (TGA) device were used to observe the decomposition characteristics of carbon dioxide. Activator prepared by solid method with 5 and 10 wt% CoO content showed an excellent performance. In TGA experiments with samples prepared by the solid method, reduction by hydrogen was 29.0 wt% and oxidation by $CO_2$ was highest in 27.5 wt%. 95% of adsorbed $CO_2$ was decomposed with excellent oxidation-reduction behaviors.

• 한국연소학회:학술대회논문집
• /
• 2012.11a
• /
• pp.221-223
• /
• 2012

Since gas turbine using biogas can reduce carbon dioxide ($CO_2$), the biogas gas turbine is becoming more attractive to renewable energy utilization business sector. Natural gas and $CO_2$ mixture was used to simulate the biogas fuel. At the experiments pressure losses, pattern factor, and emissions were measured. The results revealed that methane concentrations of the fuel mixture showed little effects on the combustor performance except emissions. As methane concentrations in fuel decreased, emissions measured at the exit of the combustor decreased.