• 한국수소및신에너지학회논문집
• /
• 제19권5호
• /
• pp.445-452
• /
• 2008

DME(Dimethyl ether) Dimethyl Ether (DME) is a new clean fuel and an environmental-benign energy resource. In comparison with other fuels, DME rapidly decomposes into carbon dioxide ($CO_2$) and water in the atmosphere without forming ozone. It can be manufactured from various energy sources including natural gas, coal, biomass and spent plastics. In addition to its environmentally friendly properties, DME is considered as one of the most promising candidates for the substitute of LPG and diesel fuel. In this work, we will be studied to find optimized condition for the catalyst of DME energy manufacture from hydrogen and carbon oxide and its chemical and physical characteristics.

• Advances in environmental research
• /
• 제4권3호
• /
• pp.143-153
• /
• 2015

The ventilation system is a key device to ensure both healthful indoor air quality (IAQ) and thermal comfort in buildings. The ventilation system should make the IAQ meet the standards such as ASHRAE 62. This study deals with a new approach to modeling the ventilation and IAQ requirement in residential buildings. In that approach, Elite software is used to calculate the air supply volume, and CONTAM model as a multi-zone and contaminant dispersal model is employed to estimate the contaminants' concentrations. Amongst various contaminants existing in the residential buildings, two main contaminates of carbon dioxide ($CO_2$) and carbon monoxide (CO) were considered. CO and $CO_2$ are generated mainly from combustion sources such as gas cooking and heating oven. In addition to the mentioned sources, $CO_2$ is generated from occupants' respirations. To show how that approach works, a sample house with the area of $80m^2$ located in Tehran was considered as an illustrative case study. The results showed that $CO_2$ concentration in the winter was higher than the acceptable level. Therefore, the air change rate (ACH) of 4.2 was required to lower the $CO_2$ concentration below the air quality threshold in the living room, and in the bedrooms, the rate of ventilation volume should be 11.2 ACH.

• Journal of Microbiology and Biotechnology
• /
• 제23권9호
• /
• pp.1260-1268
• /
• 2013

A series of experiments were carried out with three native strains of microalgae to measure growth rates, biomass, and lipid productivities. Scenedesmus sp. IMMTCC-6 had better biomass growth rate and higher lipid production. The growth, lipid accumulation, and carbon dioxide ($CO_2$) consumption rate of Scenedesmus sp. IMMTCC-6 were tested under different NaOH concentrations in modified BBM. The algal strain showed the maximum specific growth rate (0.474/day), biomass productivity (110.9 mg $l^{-1}d^{-1}$), and $CO_2$ consumption rate (208.4 mg $l^{-1}d^{-1}$) with an NaOH concentration of 0.005 M on the $8^{th}$ day of cultivation. These values were 2.03-, 6.89-, and 6.88-fold more than the algal cultures grown in control conditions (having no NaOH and $CO_2$). The $CO_2$ fixing efficiency of the microalga with other alternative carbon sources like $Na_2CO_3$ and $NaHCO_3$ was also investigated and compared. The optimized experimental parameters at shake-flask scale were implemented for scaling up the process in a self-engineered photobioreactor. A significant increase in lipid accumulation (14.23% to 31.74%) by the algal strain from the logarithmic to stationary phases was obtained. The algal lipids were mainly composed of $C_{16}/C_{18}$ fatty acids, and are desirable for biodiesel production. The study suggests that microalga Scenedesmus sp. IMMTCC-6 is an efficient strain for biodiesel production and $CO_2$ biofixation using stripping solution of NaOH in a cyclic process.

• ALGAE
• /
• 제31권1호
• /
• pp.49-59
• /
• 2016

Ulva pertusa, a common bloom-forming green alga, was used as a model system to examine the effects of elevated carbon dioxide (CO₂) and temperature on growth and photosynthetic performance. To do this, U. pertusa was grown under four temperature and CO₂ conditions; ambient CO₂ (400 μatm) and temperature (16℃) (i.e., present), elevated temperature only (19℃) (ET; i.e., warming), elevated CO₂ only (1,000 μatm) (EC; i.e., acidification), and elevated temperature and CO₂ (ET and EC; i.e., greenhouse), and its steady state photosynthetic performance evaluated. Maximum gross photosynthetic rates (GP_max) were highest under EC conditions and lowest under ET conditions. Further, ET conditions resulted in decreased rate of dark respiration (R_d), but growth of U. pertusa was higher under ET conditions than under ambient temperature conditions. In order to evaluate external carbonic anhydrase (eCA) activity, photosynthesis was measured at 70 μmol photons m⁻² s⁻¹ in the presence or absence of the eCA inhibitor acetazolamide (AZ), which inhibited photosynthetic rates in all treatments, indicating eCA activity. However, while AZ reduced U. pertusa photosynthesis in all treatments, this reduction was lower under ambient CO₂ conditions (both present and warming) compared to EC conditions (both acidification and greenhouse). Moreover, Chlorophyll a and glucose contents in U. pertusa tissues declined under ET conditions (both warming and greenhouse) in conjunction with reduced GP_max and R_d. Overall, our results indicate that the interaction of EC and ET would offset each other’s impacts on photosynthesis and biochemical composition as related to carbon balance of U. pertusa.

• 청정기술
• /
• 제28권1호
• /
• pp.9-17
• /
• 2022

전기화학적 이산화탄소 환원 기술은 전기에너지를 이용하여 대표적인 온실가스인 이산화탄소를 유용한 기초 화학제품으로 전환시킬 수 있는 유망한 기술 중 하나다. 특히, 다양한 후보 제품 중 일산화탄소는 높은 Faraday 효율과 우수한 경제성을 나타내기 때문에 학계와 산업계의 많은 관심을 받고 있다. 과거 여러 연구진이 본 기술의 온실가스 저감 잠재량을 정량적으로 분석했으나, 분석 과정에서 도입된 과정과 사용된 인벤토리 데이터의 일관성 및 투명성에 문제가 제기된다. 본 연구에서는 전기화학적 이산화탄소 환원을 통한 일산화탄소 생산 공정의 온실가스 저감 잠재량 분석을 위한 전과정평가를 수행했다. 세 종류의 시스템 경계를 정의 후 각각의 지구온난화지수를 화석연료 기반 일산화탄소 생산 공정과 비교했다. 분석 결과, 전기화학적 일산화탄소 생산 기술을 도입하여 온실가스를 저감하기 위해서는 전해조 구동에 필요한 전기에너지의 배출계수가 현재 국내 발전부문의 배출계수보다 충분히 낮아야 한다는 점을 확인했다. 또한, 신뢰성 있는 온실가스 저감 잠재량 분석을 위해서는 기존의 화석연료 기반 일산화탄소 생산 공정의 인벤토리 정보를 투명하게 공개하는 것이 중요함을 밝혔다.

• 한국대기환경학회지
• /
• 제21권5호
• /
• pp.507-513
• /
• 2005

Increasing amounts of anthropogenic $CO_2$ emitted to the atmosphere are believed to be a significant factor in global climate change. Hence, the method of chemical absorption has been suggested to separate and recover acid gases such as $CO_2$. In this study, the characteristics of absorption and regeneration of $CO_2$ for the absorbent which adding HMDA (hexamethylenediamine) into AMP (2-amino-2-methyl-1-propanol), hindered amine, was investigated in lab-scale absorption/regeneration reactor. As a result of this study, the removal efficiency of $CO_2$ increased when adding $5.9\%,\;11.7\%\;and\;23.4\%$ HMDA into $30\%$ AMP respectively. Also, the removal efficiency of $CO_2$ increased $6.5\%,\;8.4\%,\;10.3\%$ respectively as compared to AMP alone when the gas flow rate was 7.5 SL/min. In addition, all absorbents used in the study revealed the high stripping efficiency, which was almost $99\%$, at the temperature of $110^{\circ}C$. Thus, the regeneration tower should be operated at $110^{\circ}C$. At this time, the concentration of exhausted $CO_2$ was higher than $99\%$.

• 한국수소및신에너지학회논문집
• /
• 제18권4호
• /
• pp.382-390
• /
• 2007

To check the feasibility of SMART(Steam Methane Advanced Reforming Technology) system, an experimental investigation was performed. A fluidized bed reactor of diameter 0.052m was operated cyclically up to 10th cycle, alternating between reforming and regeneration conditions. FCR-4 catalyst was used as the reforming catalyst and calcined limestone(domestic, from Danyang) was used as the $CO_2$ absorbent. Hydrogen concentration of 98.2% on a dry basis was reached at $650^{\circ}C$ for the first cycle. This value is much higher than $H_2$ concentration of 73.6% in the reformer of conventional SMR (steam methane reforming) condition. The hydrogen concentration decreased because the $CO_2$ capture capacity decreased as the number of cycles increased. However, the average hydrogen concentration at 10th cycle was 82.5% and this value is also higher than that of SMR. Based on these results, we could conclude that the SMART system can replace SMR system to generate pure hydrogen without HTS (high tempeature shift), LTS (low temperature shift) and $CO_2$ separation process.

• 청정기술
• /
• 제16권3호
• /
• pp.182-190
• /
• 2010

시멘트공정 내 청정기술인 폐기물 재자원화 및 에너지회수공정을 이용하여 $CO_2$발생량 저감을 위한 타당성을 연구하였다. 원료투입물 대체방법으로써 용융슬래그를 시멘트 클링커 제조용 주원료로 사용하기 위한 전과정평가(life cycle assessment: LCA)를 실시하였다. 이를 통하여 시멘트소성로 내 탈탄산 과정에서 발생하는 이산화탄소의 양을 60% 이상 줄일 수 있었다. 이전 연구에서 환경영향평가 실시 후 우선순위로 선정된 시멘트 공정의 에너지효율 개선 및 대체에너지를 적용하여 현 시점에서 가장 빠른 시일 내에, 가장 경제적인 방법으로, 탄소중립적 에너지소비체계로의 전환을 위해 화석연료로 분류된 천연가스를 사용하여 가장 효율적인 녹색전략으로 $CO_2$배출량 저감을 위한 연구를 수행하였다.

• 한국결정성장학회지
• /
• 제25권4호
• /
• pp.145-152
• /
• 2015

rf-PECVD 방법에 의해서 $CH_4+H_2$ 혼합가스를 이용Si-웨이퍼 위에 DLC 박막을 증착할 때, 이산화탄소나 질소 등 보조가스가 증착된 박막의 결합구조와 기계적 특성에 미치는 영향을 고찰하였다. DLC 박막의 증착속도는 rf-power가 증가함에 따라서 증가하지만, 보조가스의 양이 증가함에 따라서는 감소하였다. 또한, 이산화탄소($CO_2$) 가스가 증가함에 따라 박막내 수소 함량은 감소하였으나, $sp^3/sp^2$ 결합 비는 증가하였다. 질소($N_2$) 가스가 증가하는 경우는 수소 함량은 감소하였으나, $sp^3/sp^2$ 결합비 변화에 있어 경향성은 보이지 않는 것으로 확인되었다.

• 한국산학기술학회논문지
• /
• 제17권5호
• /
• pp.17-25
• /
• 2016

본 연구에서는 지하역사와 지상역사에서의 실내공기질을 측정하고, 외부 공기에 의한 영향 정도를 확인하고자 하였다. 측정된 물질은 '실내공기질 관리법'상에서 유지기준과 권고기준으로 지정된 항목 중, 농도가 검출되지 않은 석면을 제외한 미세먼지($PM_{10}$), 이산화탄소($CO_2$), 일산화탄소(CO), 이산화질소($NO_2$), 폼알데하이드(HCHO), 오존($O_3$), 총부유세균(TAB), 총휘발성유기화합물(TVOC), 라돈 등 9종이다. 또한 미세먼지, 이산화질소, 오존 등 세 가지 물질은 I/O ratio를 통해 외기에의한 영향을 확인하였다. 공기질 측정결과 지상역사에 비해 지하역사에서 미세먼지, 폼알데하이드, 총휘발성유기화합물, 이산화질소, 라돈 등이 높은 농도로 검출되었으며, 이는 지하역사 내부에 그 오염물질의 발생요소가 존재하기 때문으로 판단된다. 오존 농도는 지상역사에서 지하역사보다 높은 농도로 검출되었으며, 특히 외부로 노출되어있는 지상역사 승강장에서 높은 농도를 보임으로써 외기 유입에 의한 영향이 있는 것으로 확인되었다. 따라서, 외기에 의한 영향을 받는 오염물질은 역사의 기계환기시 제거 과정을 거쳐 오염물질의 실내유입을 차단하고, 지하역사에서 기인한 미세먼지 등의 물질들은 실내에서 그 발생원에 따른 별도의 처리가 필요할 것으로 판단된다.