• Journal of the Korean Ceramic Society
• /
• v.44 no.8
• /
• pp.424-429
• /
• 2007

Novel conductive $CO_2$ membranes composed of dual phases, molten carbonates and electronic conducting ceramics, were investigated. As the microstructure control of electronic conducting ceramic supports is extremely important to keep the molten carbonates stable in the membranes by a capillary force applied by the pore structure of the supports, we have scrutinized the microstructure of the electronic conducting supports utilizing microscopic images and gas permeability measurement. From the evaluation of the electrical conductivities of the molten carbonates and the electronic conducting ceramic supports, we found that the ionic conductivity of the molten carbonates could determine $CO_2$ flux through the dual phase membranes if the surface exchange rate were relatively high enough.

• Transactions of the Korean hydrogen and new energy society
• /
• v.20 no.2
• /
• pp.168-178
• /
• 2009

To check feasibility of SEWGS(Sorption Enhanced Water Gas Shift) system, conceptual design and sensitivity analysis of operating variables have been investigated based on a design program of two-interconnected fluidized bed. Based on the conceptual design results, the optimum configuration for SEWGS was considered. Among three configurations, bubbling beds system was selected as the best configuration. Process design results indicate that the SEWGS system is compact and feasible. Based on the selected operating conditions, the effects of variables such as pressure, $CO_2$ capture capacity, solid inventory, CO conversion and $CO_2$ capture efficiency have been investigated as well.

• Clean Technology
• /
• v.10 no.4
• /
• pp.215-220
• /
• 2004

Micronized acetaminophen was precipitated from ethanol solution using supercritical $CO_2$ as antisolvent. A coaxial nozzle was used to introduce the supercritical $CO_2$ and the acetaminophen/ethanol solution. The effects of pressure, temperature, $CO_2$ flow rate and solvent flow rate were studied in the constant pressure and temperature condition. The particle size and morphology were influenced by the variations of precipitation condition. The particle size and morphology were analyzed with scanning electron microscopy.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.17 no.5
• /
• pp.410-417
• /
• 2005

The cooling performance of a transcritical $CO_{2}$ cycle varies significantly with a variation of refrigerant charge amount. In this study, the performance of the $CO_{2}$ system was measured and analyzed by varying refrigerant charge amount at a standard test condition. Besides, the losses of the major components in the $CO_{2}$ system were estimated by evaluating entropy generation with refrigerant charge amount. The losses in the expansion device and the gascooler show the major portion of the total loss. For undercharging conditions, the expansion loss dominates the overall system performance, while the gascooler loss increases significantly with an increase of refrigerant charge amount.

• Preventive Nutrition and Food Science
• /
• v.16 no.3
• /
• pp.261-266
• /
• 2011

Supercritical $CO_2$ pretreatment before dehydration leads to a faster dehydration rate. The best supercritical $CO_2$ pretreatment conditions for the most effective dehydration were $45^{\circ}C$, 25 MPa and $55^{\circ}C$, 25 MPa. Increasing pressure of the supercritical $CO_2$ pretreatment system tended to accelerate the dehydration rate more than increasing temperature did. Samples pretreated at higher temperatures and pressures showed greater shrinking and pore distribution on scanning electron microscopy. Control samples maintained their cell walls, whereas samples pretreated at higher temperatures and pressures showed more cell disruption, and more pores were observed. Pore sizes of control and pretreated samples were about 100 and $70{\sim}80\;{\mu}m$, respectively. Samples pretreated at higher temperatures and pressures had smaller pores and a denser distribution.

• Journal of Energy Engineering
• /
• v.13 no.3
• /
• pp.219-227
• /
• 2004

World have been encouraged to develop technologies that contribute to CO$_2$ emission reduction for many years. Those technologies can be categorized into capture, storage or sequestration, utilization, etc. There have been lots of efforts, in Korea, to develop the technology as well. In this paper, the impact factors of the technologies, especially in CDRS (Carbon Dioxide Reduction & Sequestration Center), were selected and were weighed by SMM (Storing Models Method) and AHP (Analytic Hierarchy Process) in order to evaluate the four representative areas of the technologies.

• KSBB Journal
• /
• v.25 no.6
• /
• pp.559-564
• /
• 2010

A new hydrogen-oxidizing bacterium, Aeromonas sp. strain JS-1, that can fix $CO_2$ via the reductive pentose phosphate cycle (Calvin-Benson cycle) under chemoautotrophic conditions but not photoautotrophic conditions was isolated from fresh water. Strain JS-1 showed considerable $CO_2$ fixation ability during continuous cultivation even at high $CO_2$ concentration. Strain JS-1 used $H_2$ and $CO_2$ fixation as energy and carbon sources, respectively. Carbon dioxide fixation is carried out through the Calvin-Benson cycle, in which ribulose-1,5-bisphosphate carboxylase/oxygenase (RubisCO) is the key enzyme. Hydrogen-oxidizing chemoautotrophic Aeromonas sp. strain JS-1 exhibited remarkedly strong RubisCO [EC 4.1.1.39] activity. RubisCO was purified as an $L_8S_8$-type hexadecamer with molecular mass of 560 kDa by gel filtration. The enzyme consisted of two different subunits eight large (56 kDa) and eight small (15 kDa), as demonstrated by SDS-PAGE. The specific activity of the purified enzyme was about 3.31 unit/mg and stable up to $45^{\circ}C$. The $K_m$ values for RuBP, $CO_2$, and $Mg^{2+}$ were estimated to be 0.25 mM, 5.2 mM and 0.91 mM, respectively.

• Korean Chemical Engineering Research
• /
• v.47 no.4
• /
• pp.436-440
• /
• 2009

This study demonstrates the use of a chemical lung containing potassium superoxide to convert carbon dioxide in air to oxygen. In order to reduce its extremely high reactivity, potassium superoxide was first mixed with calcium hydroxide and then combined at various ratios with polysiloxane. Silicone polymer used here served as both a water repellent and the polymer matrix. In general, the amount of carbon dioxide captured as well as that of oxygen produced increased as the proportion of potassium superoxide in the chemical lung increased. FT-IR spectroscopy revealed that the Si-O bond in chemical lung appeared at $1,050cm^{-1}$ and absorbance of chemical lung containing higher amounts of silicone was higher than that of chemical lung containing lower amounts. These results indicate that such a chemical lung may also be a useful sorbent for other acid gases, such as sulfur oxides and nitrogen oxides.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.31 no.6 s.261
• /
• pp.531-538
• /
• 2007

In this study, an air conditioning system using carbon dioxide as a refrigerant was developed for automotive cabin cooling. Experiments have been carried out to examine the steady state and dynamic characteristics of this system. The system consists of a compressor, a gas cooler, an evaporator, an expansion device, an internal heat exchanger and an accumulator. The compressor is a variable displacement type, driven by the electric motor, and the gas cooler and the evaporator are aluminum extruded heat exchangers of micro channel type. The $CO_2-refrigerant$ charge, the compressor speed, the air inlet temperature of the gas cooler, the air inlet temperature and the air flow rate of the evaporator and the cooling load are varied and the performance of the system is experimentally investigated. As the compressor speed increased, cooling capacity increased, but the coefficient of performance was deteriorated. As the cabin air temperature or the air flow rate to the cabin was set high, both the cooling capacity and the COP increased. In the cool down experiment with 1.0 or 2.0 kW of heat load, the dynamic characteristics of the air-conditioning system were investigated. For a given capacity of compressor, cool down speed was monitored, and the temperature change was acceptable fur low heat load condition.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.6
• /
• pp.102-107
• /
• 2007

A fast response $CO_2$ ($fCO_2$) analyzer for real-time measurement of carbon dioxide concentration during transient states of internal combustion engines has been developed. This analyzer uses non-dispersive infrared absorption (NDIR) technique for measuring $CO_2$ concentration and Kalman filter for removing noise components from output signals. The analyzer has good linearity, repeatability and drift with a response time of 11 ms; it is sufficiently fast to detect $CO_2$ concentration during transient states of internal combustion engines. The $fCO_2$ analyzer was used to measure transient $CO_2$ concentration of exhaust gas of the SI engine with a standard gas analyzer, and the signal of the $fCO_2$ analyzer was compared to that of the standard gas analyzer. The two concentrations were well matched during the steady state, and the $fCO_2$ analyzer could measure the variations of $CO_2$ concentration during the transient state.