• Membrane Journal
• /
• v.30 no.3
• /
• pp.173-180
• /
• 2020

As the demand for fossil fuels continues to increase worldwide, carbon dioxide (CO₂) concentration in the air has increased over the centuries. The way to reduce CO₂ emissions to the atmosphere, carbon capture and sequestration (CCS) technology have been developed that can be applied to power plants and factories, which are primary emission sources. According to the climate change mitigation policy, direct air capture (DAC) in air, referred to as "negative emission" technology, has a low CO₂ concentration of 0.04%, so it is focused on adsorbent research, unlike conventional CCS technology. In the DAC field, chemical adsorbents using CO₂ absorption, solid absorbents, amine-functionalized materials, and ion exchange resins have been studied. Since the absorbent-based technology requires a high-temperature heat treatment process according to the absorbent regeneration, the membrane-based CO₂ capture system has a great potential Membrane-based system is also expected for indoor CO₂ ventilation systems and immediate CO₂ supply to smart farming systems. CO₂ capture efficiency should be improved through efficient process design and material performance improvement.

• Applied Chemistry for Engineering
• /
• v.20 no.6
• /
• pp.663-669
• /
• 2009

The honeycomb adsorbent was prepared for adsorbing and seadsorbent was prepared by using zeolite sheet, which contained zeolite as component. The steady-state adsorption properties and surface morphologies were analyzed and breakthrough characteristics were ananlyzed by providing 16% carbon dioxide mixed gas. By thermal regeneration, carbon dioxide concentration properties were analyzed, and the adsorptive separation process was compared between thermal swing adsorption and pressure swing adsorption after adsorbent temperature change during heating. The breakthrough results of the honeycomb showed possibility parating carbon dioxide from combustion exhaust gas, which had deep impact on climate change, and the characteristics of the adsorbent were studied. Na-X zeolite was coated on a honeycomb prepared with ceramic sheet or active carbon sheet so that the two honycomb can be used at high temperature. Third honeycomb of rotary adsorptive concentration process.

• Journal of the Economic Geographical Society of Korea
• /
• v.24 no.4
• /
• pp.400-410
• /
• 2021

This study analyzed the determinants of carbon dioxide emissions through the expanded STIRPAT model using panel data from 16 metropolitan cities and provinces in Korea from 2000 to 2019. After testing cross-sectional dependence and coefficient heterogeneity of panel data, we performed analysis using MG, CCEMG, and AMG estimation methods reflected these characteristics. The results of analysis using the AMG estimation method are as follows. The coefficients of income, population, and energy intensity were statistically significant with a positive sign, but urbanization was statistically insignificant. Reduction of carbon dioxide emissions in Korea can be achieved through an increase in energy efficiency and sustainable economic growth. It is necessary to establish a policy that can contribute to sustainable economic growth by inducing productivity improvement through technology innovation reducing carbon dioxide emissions in the long-term as well as building a low-carbon society through active development of carbon dioxide reduction technology.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.12
• /
• pp.1287-1293
• /
• 2008

In this study, a blend of 2-amino-2-methyl-1-propanol (AMP) and ammonia (NH$_3$) was used to achieve high absorption rates for carbon dioxide (CO$_2$) as suggested at several literatures. The absorption rates of aqueous AMP and blended AMP+NH$_3$ solutions with CO$_2$ and nitrogen dioxide (NO$_2$) were measured using a stirred-cell reactor at 303 K. The effect of the added NH$_3$ to enhance absorption characteristics of AMP was studied. The performances were evaluated under various operating conditions. The absorption rates increased following the increase of the concentration of NH$_3$. The absorption rate of NH$_3$ blended into 30 wt.% AMP solution with NO$_2$ at 303 K was 12.6$\sim$32.6% higher than that of aqueous AMP solution without NH3. Also, the addition of 3 wt.% NH$_3$ to 30 wt.% AMP increased 48.2$\sim$41.6% values for the reactions with CO$_2$ and NO$_2$ at 303 K. Therefore, it clearly shows that the reaction rate of AMP with CO$_2$ and NO$_2$ can be increased by the addition of NH$_3$.

• Journal of the Korean Institute of Gas
• /
• v.2 no.1
• /
• pp.66-73
• /
• 1998

This paper deals with the combustion characteristics of flue gas in infared mobile heaters. The experimental work has been performed to obtain the concentration levels and combustion characteristics of flue gas with varying chamber size and room temperature. The experimental results showed that oxygen depletion sensor device was operated at the oxygen concentration level of $18.3\%$ for all the chamber size. The combustion characteristics of oxygen and carbon dioxide show a linearity After 10 minutes the combustion property of carbon monoxide occurs at random without a level of oxygen and carbon dioxide in closed space of the heater. In these results, it is very important to prevent incomplete combustion through a sufficient ventilation, and accident prevention with a reduction of the oxygen and diffusion of toxic carbon monoxide.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.10
• /
• pp.3107-3110
• /
• 2014

• Journal of Animal Science and Technology
• /
• v.65 no.2
• /
• pp.427-440
• /
• 2023

The current study evaluated carbon dioxide (CO₂) emissions from beef and pork production and distribution chains in the South Korean meat industry. Data from industrial example farms and slaughterhouses were assessed on the basis of both the guidelines from the United Kingdom's Publicly Available Specification (PAS) 2050:2011 and the Korea Environmental Industry & Technology Institute carbon footprint calculation. The main factors for our estimations were animal feeds, manure waste, transportation, energy and water, refrigerants, and package data. Our analyses show that 16.55 kg CO₂ equivalent (eq) was emitted during the production of 1 kg of live cattle. When retail yields and packing processes were considered, the CO₂-eq of 1 kg of packaged Hanwoo beef was 27.86 kg. As for pigs, emissions from 1 kg of live pigs and packaged pork meat were 2.62 and 12.75 kg CO₂-eq, respectively. While we gathered data from only two farms and slaughterhouses and our findings can therefore not be extrapolated to all meats produced in the South Korean meat industry, they indicate that manure waste is the greatest factor affecting ultimate CO₂ emissions of packaged meats.

• Journal of the Korean Ceramic Society
• /
• v.43 no.5 s.288
• /
• pp.309-314
• /
• 2006

We synthesized lithium zirconate using solid-state reaction and analyzed thermal properties (TG/DTA) of starting materials and the synthesized one. When $Li_2ZrO_3$ powder was exposed to $CO_2$ environment at $500^{\circ}C$, 93% of the theoretical absorption weight was gained within 280 min with fairly high sorption rate. Almost all the absorbed $CO_2$ was generated by heating the sample to $800^{\circ}C$. We also investigated densification behavior of $Li_2ZrO_3$ under $CO_2$ environment. By sintering $Li_2ZrO_3$ at $760^{\circ}C$ using 2-step process, we obtained dense product, composed mainly of $Li_2ZrO_3\;and\;ZrO_2$, with relative density of 92%.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.29 no.5
• /
• pp.807-813
• /
• 2000

One hundred fifty grams of Korean fermented soybean paste and hot pepper-soybean paste were packaged in glass jar of 232 mL and Sotred at 5, 13, 22 and 30℃. During the storage, the changes in their microbial flora and quality attributes were monitored. Carbon dioxide production rate from the stored pastes were also determined from initial change of CO₂concentration in headspace of the pack. Hot pepper-soybean pate showed much higher CO₂ production rate higher dependence of CO₂ production on temperature compared to soybean paste. Total aerobic bacteria count and lactic acid bacteria count did not change significantly through the storage. Yeast count in soybean paste decreased slowly after initial uprise while that of hot pepper-soybean paste steadily decreased. Surface color of hot pepper paste changed to dark red with slight decrease in 'L' value and slight increase in 'a' and 'b' values, whereas any significant color change was not observed in soy paste. Titratable acidity increased with time with higher increase in soybean paste, but pH stayed at constant level for both pastes. All the rates of quality change were higher with higher temperature. Pressure buildup due to CO₂ production needs to be considered first in designing the packages of the fermented pastes before their color changes and other chemical quality changes.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.23 no.1
• /
• pp.43-53
• /
• 2007

The purpose of this experimental study was to examine the effect of the decontamination of carbon dioxide ($CO_2$) laser in treatment of ligature-induced peri-implantitis in dogs. A total 24 implants with a sandblasted with large-grit and acid-etched (SLA) surface were inserted in six mongrel dogs. After a 3-month healing period, experimental peri-implantitis characterized by a bone loss of about 3mm was established by inducing with wires. And then wires were removed and plaque control was implemented. Surgical treatment involving flap procedure + debridement of implants surface with chlorhexidine and saline (group 1), flap procedure + GBR with absorbable collagen membrane (Bio-Gide) and mineralized bone graft (Bio-Oss) (group 2), and flap procedure + $CO_2$ laser application + GBR (group 3) was performed. The animals were killed 8 weeks and 16 weeks after treatment, respectively. A histomorphometric analysis confirmed statistically considerable new bone formation within the limit of the 5 most coronal threads in group 3 compared with group 1 at 16 weeks (P<0.05). And intragroup analysis showed considerable increase of new bone formation in group 3 at 16 weeks compared with 8 weeks (P<0.05). The present study demonstrates considerable new bone formation after treatment of experimental peri-implantitis with flap procedure, $CO_2$ laser application and GBR.