• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.18 no.2
• /
• pp.109-117
• /
• 2005

Atopic Dermatitis is chronic eczematous dermatosis which is related strongly to a family history of atopic disease and hereditary disposition. Its threshold of itching is low so that severe itching occurs and causes secondary eczema. The purpose of this study was to estimate the efficiency of oriental medical treatment and management on atopic Dermatitis. We studied 2 patients who visited Wonkwang University Kwangju Oriental Hospital Dept. of Dermatol. with atopic dermatitis from April 2004 to February 2005. We treated him with herb-medication, acupuncture, negative therapy, full spectrum visible ray therapy(by carbon arc). We used the ADSI(Atopic Dermatitis Severity Index) to assess the severity of atopic dermatitis. The grade of the severity of atopic dermatitis was lower only by the traditional chinese medical treatments and management. Considering the above result, more study is needed the factors of increasing severity of atopic dermatitis, and the clinical interchange or atopic Dermatitis between oriental medicine and western medicine.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1560-1565
• /
• 2005

Laser beam welding is increasingly being used in welding of structural steels. The laser welding process is one of the most advanced manufacturing technologies owing to its high speed and deep penetration. The thermal cycles associated with laser welding are generally much faster than those involved in conventional arc welding processes, leading to a rather small weld zone. Experiments are performed for 304 stainless steel plates changing several process parameters such as laser power, welding speed, shielding gas flow rate, presence of surface pollution, with fixed or variable gap and misalignment between the similar and dissimilar plates, etc. The following conclusions can be drawn that laser power and welding speed have a pronounced effect on size and shape of the fusion zone. Increase in welding speed resulted in an increase in weld depth/ aspect ratio and hence a decrease in the fusion zone size. The penetration depth increased with the increase in laser power.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.706-711
• /
• 2007

Numerical studies were performed to examine the effects of notch location of impact specimens on the failure behavior of HAZ (heat affected zone) when Charpy V-notch impact test were made at a low temperature ($1^{\circ}C$). Carbon steel plate (SA-516 Gr. 70) with thickness of 25mm for pressure vessel was welded by SMAW (shielded metal-arc welding) and specimens were fabricated from the welded plate. Charpy tests were then performed with specimens having different notch positions of specimens varying from the fusion line through HAZ to base metal. A series of finite element analysis which simulates the Charpy test and crack propagation initiating at the tip of V-notch was carried out as well. The finite element analysis takes into account the irregular fusion line and non-homogenous material properties due to the notch location of the specimen in HAZ. Results reveals that the energies absorbed during impact test depend significantly on the notch location and direction of specimen. Finite element analysis also demonstrates that the notch location of specimens, to a great extent, influences the reliability and consistency of the test.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.5
• /
• pp.795-798
• /
• 2006

The phosphoenolpyruvate-dependent carbohydrate phosphotransferase system (PTS) is responsible for the simultaneous transfer and phosphorylation of various carbon sources in Escherichia coli. The ptsG gene encoding the enzyme $IICB^{Glc}$, the membrane component of the glucose-specific PTS, is repressed by Mlc and activated by the CRP cAMP complex; various other factors, such as Fis, FruR, and ArcA, are also known to be involved in ptsG regulation. Thus, in an attempt to discover a novel gene affecting the regulation of ptsG, a mutant with a decreased ptsG transcription in the presence of glucose compared with the wild-type strain was screened using transposon random mutagenesis. The mutant was found to have a transposon insertion in yhjV, a putative gene encoding a transporter protein whose function is yet unknown.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.632-638
• /
• 2002

Electron beam (EB) and Gas tungsten arc (TIG) welds were performed on 12.7 mm thick Ti-6Al-4V plate (ASTM Titanium Grade 5). Charpy-V toughness and hardness, as well as, microstructure of the welds and penetration from the macrostructure were studied. It appears that by EB welding rather smaller $\beta$-grains than with TIG welding can be obtained. Next to the fusion line the $\beta$-grain size in the HAZ was 50 ${\mu}{\textrm}{m}$l while in the weld metal it was 150 ${\mu}{\textrm}{m}$. Charpy-V toughness of the EB weld metal was equal or even better to that of base metal, which shows that the $\alpha$-martensite per se is not particularly brittle if only the grain size is fine enough. This is similar to behavior of low carbon martensite in steel. The grain size was studied with light optical and scanning electron (SEM) microscopes. Thus for products, for products which can be manufactured automatically with very narrow fit, the EB welding of Ti-6Al-4V appears to yield satisfactory toughness without any complex post weld heat treatment. ill this study as in earlier studies the TIG welds gave lower toughness than that of the base material due to the higher heat input and slower cooling as compared to EB welding.

• Corrosion Science and Technology
• /
• v.6 no.3
• /
• pp.83-89
• /
• 2007

It is expected that advanced high strength steels (AHSS) would be widely used for vehicles with better performance in automotive industries. One of distinctive features of AHSS is the high value of carbon equivalent (Ceq), which results in the different properties in formability, weldability and paintability from those of common grade of steel sheets. There is an exponential relation between Ceq and electric resistance, which seems also to have correlation with the thickness of electric deposition (ED) coat. Higher value of Ceq of AHSS lower the thickness of ED coat of AHSS. Some elements of AHSS such as silicon, if it is concentrated on the surface, affect negatively the formation of phosphates. In this case, silicon itself doesn't affect the phosphate, but its oxide does. This phenomenon is shown dramatically in the welding area. Arc welding or laser welding melts the base material. In the process of cooling of AHSS melt, the oxides of Si and Mn are easily concentrated on the surface of boundary between welded and non‐welded area because Si and Mn could be oxidized easier than Fe. More oxide on surface results in poor phosphating and ED coating. This is more distinctive in AHSS than in mild steel. General results on paintability of AHSS would be reported, being compared to those of mild steel.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2005.11a
• /
• pp.61-65
• /
• 2005

Existing test methods for thick-section specimens ( 4mm) have not provided precise compressive properties to date for the analysis and design of thick structure. A survey of the failure behaviour of such thick specimens revealed that the failure initiated at the top corner of the specimen and propagated down and across the width of the specimen as premature failure, not typically reported for thin compression specimens. In the current study, the premature failure was successfully avoided during compressive testing and the failure mode was quite similar regardless of increasing specimen thickness and specimen volume. Failure mode was similar regardless of increasing specimen thickness and specimen volume, i.e. brooming failure mode combined with longitudinal splitting, interlaminar cracking, fibre breakage and kinkband formation (fibre microbuckling). Nevertheless, average failure strengths of the specimens decreased with increasing specimen thicnkiness from 2mm to 8mm with the T800/924C system (36% strength reduction) and specimen volumes from scaling factor I to scaling factor 4 with the IM7/8552 system (46% strength reduction). It was revealed from the literature$^{11}$ that the thickness effect and scaling effect arc caused by manufacturing defects such as void content and fibre waviness.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.59-59
• /
• 1999

DLC(diamond-like carbon)필름은 다이아몬드와 유사한 강도, 낮은 마차계수, 높은 Optical band gap, NEA(negative electron affinity)등의 우수한 특성을 가지고 있어, 내마모 코팅이나 정보저장 매체의 윤활 코팅, FED(field emission display)의 전계방출소자등 다양한 분야에의 응용이 연구되고 있다. DLC 필름은 PECVD(plasma enhanced chemical vapor deposition), IBAD(ion beam assisted deposition), Laser ablation, Cathodic vacuum arc등의 process를 이용하여 증착되고 있다. 특히 이러한 필름의 물성은 입사되는 이온의 에너지에 의해 좌우되는데, Lifshitz 등의 연구에 의하여 hyperthermal species를 이용한 DLC 필름의 성장은 초기에 subsurface로의 shallow implantation이 일어난 후 높은 sp3 fraction을 갖는 필름이 연속적으로 성장한다는 subplantation model이 제시 되었다. 본 연구에서는 기판과 subplantation 영역이 이후 계속하여 증착되는 순수 DLC 필름의 특성 변호에 미치는 영향에 대하여 관심을 가지고 실험을 행하였다. 본 실험에서는 상기 제시되어 있는 방법보다도 더욱 정확하고도 독립적으로 탄소 음이온의 에너지와 flux를 조절할 수 있는 Cs+ ion beam sputtering system을 이용하여 탄소 음이온의 에너지를 40eV에서 200eV까지 변화시키며 필름을 증착하였다. Si(100) 웨이퍼를 기판으로 사용하였고 증착 압력은 5$\times$10-7torr 였으며 인위적인 기판의 가열은 하지 않았다. 또한 Ion beam deposited DLC film의 growth process를 연구하기 위하여 200eV의 탄소 음이온을 시간(증착두께)을 변수로 하여 증착하였고, 이 때에는 Kaufman type의 gas ion beam을 이용하여 500eV의 Ar+ ion으로 pre-sputering을 행하였다. 탄소 음이온의 에너지와 증착두께에 따라 증착된 film 내의 sp3/sp2 ratio 의 변화를 XPS plasmon loss 와 Raman spectra를 이용하여 분석하였다. 또한 증착두께에 따른 interlayer의 결합상태를 관찰하기 위하여 AES와 XPS 분석을 보조로 행하였다.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.17 no.2
• /
• pp.45-61
• /
• 2015

In order to analysis on color difference of natural dyes, I have dyed Hanji, cotton, silk fabric and exposed them to carbon arc light. The results of experiment have been analysed by wavelength of maximum absorption, amounts of dye uptake, color difference, Hunter's value and Munsell's value. Gardenia Jasminoides is monogenetic dye, but it gained darker color by pre-mordanting method used Al mordant agent and greenish yellow color by Fe mordant agent. whereas Curcuma, an Amur cork, and bud of pagoda tree are shown as greenish yellow color, and A barberry root, Betel nut, and Rhubarb are shown as reddish yellow color. these gained khaki colored dyed fabric by Fe mordanting. In addition, Sappan wood showed great result in pre-mordanting. Especially, it gained dark red color by Al pre-mordanting. The pink color was shown by post-mordanting. and Logwood showed great dyeing result in Hanji and cotton better than silk. Specially pre-mordanting was effective. Hanji and cotton showed greenish blue color by Al pre-mordanting, and silk showed brown color.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.18 no.4
• /
• pp.77-86
• /
• 2016

In order to analysis on color difference of natural dyes, I have dyed Hanji, cotton, silk fabric and exposed them to carbon arc light. The results of experiment have been analysed by Munsell's value, and compared the difference of colors which were recognized visually. Gardenia Jasminoides is monogenetic dye, but it gained darker color by pre-mordanting method used aluminum mordant agent and greenish yellow color by ferric mordant agent. whereas Curcuma, an Amur cork, and bud of pagoda tree are shown as greenish yellow color, and A barberry root, Betel nut, and Rhubarb are shown as reddish yellow color. these gained khaki colored dyed fabric by ferric mordanting. In addition, Sappan wood showed great result in pre-mordanting. Especially, it gained dark red color by aluminum pre-mordanting. The pink color was shown by post-mordanting. and Logwood showed great dyeing result in Hanji and cotton better than silk. Specially pre-mordanting was effective. Hanji and cotton showed greenish blue color by aluminum pre-mordanting, and silk showed brown color. However the color, which was recognized visually, differed from colorimeter sometimes. Therefore, such color table might be necessary for the natural dyeing.