• 한국자동차공학회논문집
• /
• 제14권3호
• /
• pp.22-27
• /
• 2006

As the regulation and assessment program for safety of passengers become stringent, automakers are required to develop lighter and safer vehicles. In order to fulfill both requirements which conflict with each other, automobile and steel companies have proposed the application of AHSS(Advance High Strength Steel) such as DP, TRIP and martensite steel. ULSAB-AVC model is one of the most remarkable reactions to offer solutions with the use of steel for the challenge to improve simultaneously the fuel efficiency, passenger safety, vehicle performance and affordability. This paper is concerned with the crash analysis of ULSAB-AVC model according to the US-SINCAP in order to compare the effectiveness between the model with AHSS and that with conventional steels. The crashworthiness is investigated by comparing the deformed shape of the cabin room, the energy absorption characteristics and the intrusion velocity of a car.

• 대한토목학회논문집
• /
• 제31권6D호
• /
• pp.765-769
• /
• 2011

기존의 이동식 기준장비는 갓길의 폭이 1.5m 이하인 도로 구간에는 설치가 어려우며 장비가 크고 무거워서 차량과의 충돌 시 피해가 클 수 있으며 한 번에 다차로 검지가 불가능하다. 본 연구에서는 이러한 문제점을 노정하고 있는 기존의 이동식 기준장비의 단점을 극복하기 위하여 연구 개발된 USN-기반 이동식 기준장비의 특징을 기술하고 그 성능수준을 현장 적용을 통하여 평가하였다. 그 결과 본 연구에서 개발된 장비는 기존의 이동식 기준장비가 가지고 있는 운영상의 단점을 극복할 뿐 아니라 기준장비가 가져야 할 성능수준을 만족하는 것으로 나타났다.

• 한국자동차공학회논문집
• /
• 제20권4호
• /
• pp.10-15
• /
• 2012

The design of automobile occupant seat belt system has been studied by using MADYMO. Based on the FMVSS 208 (Federal Motor Vehicle Safety Standards 208) and the USNCAP (United States New Car Assessment Program) regulations, seat belt design parameters were chosen for the design improvement to the 5th percentile female dummy: limit force of load limiter, time to fire of shoulder belt, inlet length of shoulder belt, inlet length of lap belt. The design of experiment method was employed to optimize the design parameters of passenger seat belt. Range of injury probability due to the change of H-point position was estimated by the simulation.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2009년도 춘계 종합학술대회 논문집
• /
• pp.884-888
• /
• 2009

Vehicular Adhoc Networks(VANET)은 차량과 노변장치 또는 차량간 통신 기술로 MANET의 보다 구체적인 활용 분야이면서 MANET의 Quality of Service(QoS) 기술이 Video on Demand(VoD), Video streaming, Voice over IP(VoIP) 등 멀티미디어 데이터의 품질을 위하여 연구되고 있다면, VANET에서는 사고나 기타 예상될 수 있는 응급한 상황에 대하여, 즉시 주변 차량에 전달하여 사고를 미연에 방지하는 등의 부분에 초점이 맞추어져있다. 본 논문에서는 Link State Routing(LSR)을 이용하여 실제 네트워크를 구성하고, Common Open Policy Service(COPS)를 이용한 QoS Provisioning 모델을 구현하였다. 그리고 VANET의 특성에 맞는 보다 효율적인 k-hop Cluster, inter-domain policy negotiation에 대하여 제안한다.

• 한국자동차공학회논문집
• /
• 제17권1호
• /
• pp.12-18
• /
• 2009

Skid mark and coefficient of friction are usually utilized to calculate the velocity and behavior of vehicles. For a critical case such as traffic accident reconstruction, however, the initial velocity of the car should be calculated precisely. In this study, in order to estimate the speed at the brake onset, rapid braking tests were executed on the proving ground. We compared with a skid length and wheel locking time of an expert driver and a general person. We verified that the skid mark of expert driver occurs longer than general person's. A new method is proposed to determine the speed of a vehicle at the brake onset of maximum braking, which could be applied to a reconstruction of vehicle with Non-ABS.

• 자동차안전학회지
• /
• 제15권1호
• /
• pp.55-62
• /
• 2023

In this study, a chest deflection is predicted by introducing a deep learning technique with the results of the frontal impact of the USNCAP conducted for 110 car models from MY2018 to MY2020. The 120 data are divided into training data and test data, and the training data is divided into training data and validation data to determine the hyperparameters. In this process, the deceleration data of each vehicle is averaged in units of 10 ms from crash pulses measured up to 100 ms. The performance of the deep learning model is measured by the indices of the mean squared error and the mean absolute error on the test data. A DNN (Deep Neural Network) model can give different predictions for the same hyperparameter values at every run. Considering this, the mean and standard deviation of the MSE (Mean Squared Error) and the MAE (Mean Absolute Error) are calculated. In addition, the deep learning model performance according to the inclusion of CVW (Curb Vehicle Weight) is also reviewed.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1993년도 추계학술대회논문집
• /
• pp.243-251
• /
• 1993

With the recent issuance of a dynamic side impact test regulation in the Federal Motor Vehicle Safety Standard in the United States of America, many aspects of occupant protection in side impact crashes have been under investigation. Many investigations of real world accidents, crash test results and simulation studies have established that in side impact crashes of passenger cars, thoracic and pelvic injuries of occupant are, large part, caused by occupants' impact against the interior side of the vehicle, primarily the door. This paper is concerned with the development of a lumped mass computer model, which simulates the interaction of a struck car door and an adjacent seated occupant in side impacr, based CTP code which has been successfully used in vehicle and occupant simulation. New model developments include elimination of influence of vehicle side structure stiffness in the occupant injury responses. The model was used to investigated the effect of various door padding characteristics on occupant responses to improve vehicle safety performance. The evaluation of different crush properties of door padding have also focused to understand of behavior of impacted occupant. Results from simulations, The effects of both material coefficients $C_{f}$ and p were illustrated in terms of occupant injury criteria TTI and pelvis.

• 한국기계가공학회지
• /
• 제7권4호
• /
• pp.115-120
• /
• 2008

The fatalities of pedestrian accounted for about 40.0% of all fatalities in Korea (2005 year). In pedestrian involved accident, the most important data to inspect accident is throw distance of pedestrian. The throw distance of pedestrian can be influenced by many variables, such as vehicular frontal shape, vehicular impact speed, the offset of impact point, the height of pedestrian, and road condition. The trajectory of pedestrian after collision can be influenced by vehicular frontal shape classified into sedan type, box type, SUV type and van type. Many studies have been done about pedestrian accident with passenger car model and bus model for simple factors. But the study of pedestrian accident by van type vehicle was much insufficient, and even that the influence of multiple factors such as the offset of impact point was neglected. In this paper, a series of pedestrian kinetic simulation were conducted to inspect relationship between throw distance and multiple factors with using PC-CRASH s/w, a kinetic analysis program for a traffic accident for van type. By based on the simulation results, multi-variate regression was conducted, and regression equation was presented.

• Journal of Acupuncture Research
• /
• 제27권2호
• /
• pp.143-154
• /
• 2010

Objectives : The main purpose of this research is to make a survey of the effective way of the Oriental medical care and to enlarge the range of Oriental medical treatment about neck pain patients caused by traffic accident. Methods : In following research. we surveyed 197 neck pain patients of traffic accident who admitted in Daegu Hanny University Oriental Medical Hospital from May, 1, 2008 to september, 30, 2009 according to medical chart. Results : 1. In distribution of gender and age, the rate of female was 74.6%, that of male was 25.4% and the majority of the patients were thirties. In results of treatment according to gender and age, the effective rate of female was higher than the male. that of teens was highest. 2. In total results of treatment, the highest distribution was fair with 40.1%, the effective rate was 90.9%. 3. In category of traffic accident patterns, the highest distribution was car to car crash with 81.7%. The results of treatment according to the significance test were shown statistical significance. 4. In admission days, the highest distribution was 6~10 days with 41.1%. The highest effective rate was 21~25days with 100%. The results of treatment according to the significance test were shown statistical significance. Conclusions : This study suggested that Oriental medical treatments are effective in patients of neck pain caused by traffic accident. Further studies are needed for progress report that after accident patients are discharged from the Oriental Medical Hospital.

• 한국자동차공학회논문집
• /
• 제13권2호
• /
• pp.127-134
• /
• 2005

This paper introduces a newly developed high speed material testing apparatus for tensile tests at the strain rate up to 500/sec. The tensile properties of sheet metals are indispensable for the accurate crashworthiness analysis of auto-bodies since the local strain rate reaches to 500/sec in the car crash. An appropriate experimental method has to be developed to acquire the tensile properties at the intermediate strain rate ranged from 0.003/sec to 200/sec. Tensile tests of various different steel sheets for an auto-body were perform ed to obtain the dynamic properties with respect to the strain rate. The dimensions of specimens that can provide the reasonable results were determined by the finite element analysis. A special jig fixture of a load cell is designed to reduce the load ringing phenomenon induced by unstable stress propagation at the high strain rate. Stress-strain curves were acquired for each steel sheet from the dynamic tensile test and utilized to obtain the relationship of the stress to the strain rate.