• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1074-1079
• /
• 2011

This paper describes the influence on the nonlinear critical speed results of a specific railway vehicle depending on various constraint conditions. In the roller-rig tests, proper constraints are inevitable to safely hold the test vehicles. Particularly, the test results using KRRI roller-rig are more sensitive to constraint conditions because it is a kind of semi-full car type. In this study, nonlinear critical speed of specific vehicle with regards to several constraint cases were predicted by computational analysis and these results were compared to find the suitable constraint conditions. And also the deviation of semi-full car model from actual full car model was investigated. According to the bifurcation analysis, the nonlinear critical speed are dependent with the constraint condition and car-body yaw motion should be free to achieve more accurate results. And the difference between semi-full and full car model was so small that KRRI's semi-full car model are valid as long as the stability is concerned.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 추계학술대회 논문집
• /
• pp.464-475
• /
• 1998

The study was carried out about the design of Power Car for Korean High Speed Train of maximum operating speed of 350㎞/h. At 350㎞/h, air resistance accounts for by far the greater part of overall resistance to forward motion. So, The Power Car's shape has to be largely determined by aerodynamic considerations. In a multiple unit such as the KHST, the two power cars assume the role of a locomotive. They accommodate all the machinery for providing traction. The train is controlled and monitored from power cars. The mechanical portion of KHST Power Car is the subject of this paper, which focuses on aerodynamics, mass balance, the car body and the layout of the equipment that is fitted into power car.

• 대한기계학회논문집A
• /
• 제34권1호
• /
• pp.55-60
• /
• 2010

틸팅형 고속열차의 차체에 적용되는 하니컴 복합재 조인트 구조물의 경우 운행중 외팔보형 굽힘하중을 받게된다. 하이브리드 복합재 조인트 구조물에 대한 굽힘시험평가를 수행하기 위해 실제 틸팅열차 차체 구조물에서 조인트부를 절단 채취하여 시험편으로 제작하였다. 굽힘시험결과 시험편의 파괴거동은 정적하중과 피로하중하에서 확연히 달라짐을 보였다. 정적굽힘하중 하에서는 하니컴 코어 영역에서 전단변형과 파괴가 발생하였으며, 피로굽힘하중 하에서는 복합재 표피층과 하니컴 코어층 사이에서 계면분리가 발생하거나, 또는 금속재 언더프레임과의 용접부에서 파괴가 발생하였다. 이러한 파괴거동은 다른 산업분야에서 사용되는 유사한 구조의 하니컴 복합재 조인트 구조물에서도 발생할 수 있기 때문에, 본 실험 결과를 하니컴 복합재 조인트 구조물의 설계변수를 개선하기 위해 이용될 수 있다.

• 한국산학기술학회논문지
• /
• 제12권1호
• /
• pp.32-37
• /
• 2011

본 연구에서는 구조해석을 통하여 차체의 전복 시에 있어서의 차체의 두께에 따른 변형량과 응력 변화를 고찰하여 보았다. 차체의 두께가 5t인 자동차에서는 2초일 때에 차체의 오른쪽 천장에서 7.5024mm의 최대변형이 일어났으며, 차체의 왼쪽 밑 부분에서 113.69 MPa의 최대응력을 받았다. 차체의 두께가 10t인 자동차에서는 2초일 때에 차체의 오른쪽 천장에서 1.2557mm로 최대의 변형이 일어났으며 차체의 왼쪽 밑 부분에서 15.134 MPa의 최대응력이 발생했다. 차체의 두께가 15t인 자동차에서는 2초일 때에 0.42529mm로서 차체의 오른쪽 천장에서 최대의 변형이 일어났으며 응력은 2초일 때에 차체의 왼쪽 밑 부분에서 4.405MPa의 최대응력이 작용되었다. 두께가 15mm보다 커지는 경우에는 시간에 따른 응력 및 변형율의 분포가 고르게 나타나고 있어 설계의 안전성을 보이고 있다.

• 동의생리병리학회지
• /
• 제21권2호
• /
• pp.518-522
• /
• 2007

The cortex and root of Acnthopanax sessiliflorus, a herbal medicine, have been used for several diseases including cancer in Oriental countries. In the previous study, we showed that the cortex of this plant have anti-cancer activity. But its therapeutic efficacy of CORTEX ACANTHOPANAX RADICIS (CAR) is not clarified. For these reasons, we investigated immuno-potentiating and anti-cancer properties of CAR compared with CA, in terms of body and tumor weights, proliferation of thymocytes and tumor cells, and nitric oxide production from macrophages through in vitro and in vivo studies. In our results, administration of CAR reduced tumor mass and increased body weights. CAR also inhibited proliferation of tumor cells in vivo and in vitro dose-dependently. Thymocyte proliferation was accelerated by treatment with CAR and NO production was also promoted by CAR in vivo and vitro. In conclusion, we demonstrated that CAR is useful to treat for cancer as complementary or alternative medicine to Western medication, its therapeutic efficacy is involved in direct inhibition of tumor growth and immuno-potentiating activity.

• 한국자동차공학회논문집
• /
• 제14권4호
• /
• pp.92-98
• /
• 2006

In this paper, a planar car model with 3 degrees of freedom was analyzed using the concept of the roll center. To avoid ambiguity, force components which require experimental data were excluded. Only kinematic approach was used to find the position and orientation of the vehicle body and the position of the roll center. The roll center was found by the pole with infinitesimal movement and Kennedy-Aronhold theorem. Centrodes, which are the loci of instantaneous centers of planar motion, were constructed with analyzed results to show characteristics of vehicle body motion. To verify the presented analysis method in this paper, the locus of the roll center and the motion of a 3 D.O.F. planar car model were compared with those of the 1 D.O.F. model.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.169-174
• /
• 2007

Adopting articulated bogie system, the HSR350x and KTX have similar physical mechanical characteristic, but they show different dynamic characteristics due to different position of suspensions and those physical properties. The low level vibration frequency which effects on the ride comfort of passengers and the high level vibration frequency which is related to noise of vehicle have been measured by accelerometers mounted on Wheel sets, Bogies and Car bodies to analysis the dynamic characteristics of the High-Speed Trains. The KTX number 36 is utilized to measure the lateral and vertical acceleration value of car body, and total measurement system of HSR350x have been used to acquire acceleration data. The sampling frequency of data is 500Hz generally, but the Car body at TT2 of HSR350 has 1000Hz exceptionally.

• 한국자동차공학회논문집
• /
• 제15권4호
• /
• pp.17-26
• /
• 2007

In this paper, a theoretical approach is studied to predict structural performances and weight reduction rates of a car-body with shell type sections in case that its materials have to be substituted. For the material substitution design of a car-body, bending, axial and twisting deformations are considered under constant stiffness and strength conditions, which utilize some new indices derived from a structural performance point of view. The developed indices to measure the weight reduction by the material substitution give good guidelines on conceptual design of car-bodies.

• 한국철도학회논문집
• /
• 제6권4호
• /
• pp.300-307
• /
• 2003

Using a conventional railway, a tilting train was applied as a means of improving vehicle speed curve negotiation without any modification of infrastructure. In order to achieve the optimal car-body position control through the tilting mechanism, a dynamics analysis was required after the kinematics analysis of the tilting mechanism. For this, the geometric relationship of the linkage-type tilting mechanism was defined. Then, the equations of motion for the half car-body were derived. With the derived equations, the effect of the parameter change on performance was analyzed. The analysis result can be used in the optimum design of a tilting mechanism that considers the track environment, vehicle and operational conditions in which the tilting vehicle is applied.

• Corrosion Science and Technology
• /
• 제6권5호
• /
• pp.245-250
• /
• 2007

Recently, to avoid global warming, reduction of $CO_2$ generation has been demanded. Each car manufacture takes positive actions for improvement in fuel consumption by various kinds of countermeasures, e.g. improving engine efficiency, using alternative fuels, lightening the car body. Regarding lightening of the car body, aluminum alloys and high tensile strength steels has been gradually adopted as lightweight materials. However, such materials are normally not easy to be treated with zinc phosphate system. Focusing the pre-treatment processes, low temperature phosphate system could be demanded for energy saving. This time, new surface conditioning process for lightweight materials and low temperature phosphate system shall be discussed.