• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.8
• /
• pp.673-682
• /
• 2007

Recently the trend of automobile industry is that IQS evaluation index against a sensitivity quality is increasing. To reduce rattle noise due to speaker sound at low frequencies, it is required the advanced technology analysis process of body structure. This paper optimized the design parameters of package tray panel according to the theoretical background about robust design and suggested the design guideline for resonance avoidance and the reduction of vibrational sensitivity considering the excitation frequency of woofer speaker. And this paper described the design process of a door module panel through the sensitivity analysis in case of the door speaker excitation. Finally, the analysis of the quality deviation using mother car is suggested to guarantee the stable characteristics of vehicle vibration in the early stage of vehicle development. These improvements can lead to shortening the time needed to develop better vehicles.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.4
• /
• pp.133-143
• /
• 2020

The paper investigates the factors affecting the profitability of commercial banks in Asian developing countries, including Vietnam, Malaysia and Thailand. We use panel data of four entities; ten banks in Vietnam, eight banks in Malaysia, nine banks in Thailand and all 27 commercial banks from the period 2012 to 2016. Particularly, Return on Asset, Return on Equity and TOBINQ are defined as profitability indicators, which are impacted by three main types of independent variables, namely bank-specifics, which include CAR, NPL, Cost to income, Liquidity ratio and Bank size, industry-specific variable-concentration HHI and macroeconomic-specific variables, which consist of GDP growth and Inflation. Using panel data regressions, the paper identifies several similarities and differences among empirical results on the models of four entities, each of three countries and the overall sample. The most outstanding similarity is that all entities record the significantly negative relationship between operational risk and banking profitability. Likewise, the significantly negative influence of bank size to profitability is found on models of Vietnam and Thailand and no significant effect on the model of Malaysia. Meanwhile, the most controversial result comes up with the negative relationship between CAR and profitability indicators as well as the positive association between credit risk and banking profitability.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.14
• /
• pp.349-370
• /
• 2000

The environmental problems such as global climate change, global waming, ozone depletion, environmental pollution have been caused by the rapid economic growth, increasing in use of fossil fuels for industrialization and scientific technology development. Especially human activities are significantly altering the atomosphere's composition and its radiative properties. To Stabilize greenhouse gas concentrations in the atmosphere at a level that would prevent dangerous anthropogenic interference with the climate system, the international community adopted the UN Framework Convention on Climate Change in 1992 and Kyoto protocol in 1997. Also to protect ozone layer the international community adopted the Vienna Convention for the Protection of the Ozone Layer in 1985, and the Montreal Protocol on Substances that Deplete the Ozone Layer in 1987. To achieve global environmental objectives, some multilateral environmental agreements includes trade regulation. For example, Montreal Protocol includes the provisions to regulate the world trade of the sudstances which might destroy ozone layer. However Kyoto Protocol has no provisions to regulate trade and is not in force yet. Although there is no trade regulation article in Kyoto Protocol, the international world trade will be influenced by limitation and reduction of CO2 and strengthening the CO2 emission standard for import good. For example Korean car industy agreed with EU to reduce CO2 emission from new passenger car and Korean Semiconductor industry agreed with WSC(World Semiconductor Council) to reduce PFCs in 1999.

• Transactions of Materials Processing
• /
• v.17 no.2
• /
• pp.130-134
• /
• 2008

Resource and energy saving is a very important practice for the future as well as for today. Weight saving of structural parts, which are formed by extrusion, plays a key role in manufacturing field. The cross-sections of extruded parts with industrial aluminum are constant in the axial direction by conventional extrusion method. Especially, these aluminum parts used and manufactured in the car industry need other processes to vary the cross-section in the axial direction. However, applications of these parts are often limited by high cost. If the cross-section of the parts is variable by only extrusion with newly developed method, the application of extruded aluminum parts will actually increase. Therefore, a new CNC extruder that can control the section area of a car part was invented for the first time in the nation. Using the extrusion machine, the experiment was performed to validate its workability during the variable section extrusion process. Also, numerical analysis was carried out to investigate the flow mode with different speeds of main ram and various pocket shapes of a die-set in the variable section extrusion process.

• Proceedings of the KWS Conference
• /
• 2005.06a
• /
• pp.370-376
• /
• 2005

Magnesium alloys are becoming important material for light weight car body, due to their low specific density but high specific strength. However they have a poor weldability, caused high oxidization tendency and low vapor temperature. In this study, the welding performance of magnesium alloys was investigated for automobile application. The materials were rolled magnesium alloy sheet contains Al and Zn such as AZ3l , AZ6l and AZ9l. Three types of welding process were studied, that were GTAW, Laser beam welding and FSW. To evaluate the weldability, we examined the appearance of welding bead. Also we checked bead shape and internal defects such as crack and porosity on cross section of welding bead. The mechanical property was measured for welded specimen by tensile test. For determination of the strength change by welding process, the hardness profile across the welding center was measured. For the results, the tensile properties of welded specimen were decreased obviously on all welding process. For the fusion welding process such as GTAW and laser beam welding, the surface of the welding bead was covered with oxidized magnesium dust but it was removed by simple cleaning work as wipe-out with tissue. Also under cut, that caused vaporization of base metal was occurred. for the friction stir welding, there was no oxidation, under-cut or internal defects. However it had poor weld performance, the reason was cleavage fracture occurred at plastic deformation zone. For welding of magnesium alloy, the laser beam welding process was recommended.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.18 no.6
• /
• pp.598-603
• /
• 2009

Resistance spot welding has been investigated to apply for manufacturing car bodies because of its high productivity. So quality of resistance spot weld is one of the major concerns for both automobile and aerospace industry. Current design trends in automotive manufacture have shifted emphasis to alternative lightweight materials in order to aid in producing vehicles with higher fuel efficiency and lower down the vehicle emission level for environmental control. There is increasing emphasis to provide lighter cars. Therefore there is an effort to use high strength steels such as HSLA, dual phase, in car body. However there is used in restricted because of difficulty in producing consistently high quality resistance spot welds. In this study, resistance spot welding schedules were developed to achieve acceptable welds with improved static mechanical properties. Improved resistance spot welding schedules were developed using post heating current to reduce the cooling rate, or in-process tempering to reduce the hardness of the weld produced. The effects of resistance spot welding process parameter on hardening fracture mode and static mechanical properties of the joints were determined.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.897-901
• /
• 2005

21 century as the knowledge information anger society now our society industry of all fields the rolling stock maintenance conservative standardization enterprise where information anger is being turning out construction Ministry of Transportation supported with continuous development of the supply section substitution quantity information processing system which the information highway is quick and the Korean railroad technical research worker propelled the enterprise as the subjective agency, it contracted this for a vehicle field information anger system construction in link of the enterprise our construction and an agreement, information technique composed the consortium t9day and it propelled a system codevelopment. The SMSC who is a front-runner of Maj loach city railroad operation agency to 'here business relates with a vehicle field maintenance conservativeness an immediacy operation and generally and information anger it will plan it will integrate it will own jointly and business efficiency and in the dictionary an obstacle occurrence electromotive car maintenance conservative information and it will improve only maintenance conservativeness of preventive maintenance of the electromotive car it knows it will prevent to construct the maintenance conservative system of the preventive maintenance, it applied the RIMS project to sleep.

• International Journal of Reliability and Applications
• /
• v.11 no.1
• /
• pp.55-67
• /
• 2010

There has been a recent upsurge in demand for the improvement of car reliability in the Northern American which is the primary market of South Korea automobile industry. It has been required that the warranty for transmission control unit for passenger cars directly related to passenger safety or security should be extended for 10 years and 160,000 km. In this paper, the test method for reliability and evaluation criteria is presented to evaluate the reliability on the automatic transmission controller. Reliability certification test can be roughly divided into two types: a quality test and life assessment test and a quality test can be subdivided into a basic performance test and environmental resistance test. There are 3 types of tests on the performance test for automatic transmission controller and environmental resistance test is composed of 14 items. Life test is performed with only the product passed this quality test. In this study, operation limit test at the high-temperatures, accelerated life test under specific temperature and accelerated life test for 2 or 3 stress levels are shown as a way for life test.

• Journal of Ocean Engineering and Technology
• /
• v.14 no.2
• /
• pp.89-98
• /
• 2000

Using conventional textile techniques such as weaving braiding knitting and stitching it is possible to produce a wide range two and three dimensional fiber preforms, however so far only a limited attention has been given to knitted fabrics in composite industry. This is mainly due to the opinion that knitted fabric reinforced composites posses low mechanical properties owing to their looped fiber architecture. But it is possible to obtain desired mechanical properties by selecting proper knitted fabric structure, In this paper mechanical characteristics of kevlar plain weft knitted fabrics reinforced plastics(KFRP) are evaluated for th development of intrusion beam of car side door. Tensile bending impact properties of KFRP are measured experimentally and crush demands of Americal Federal Motor Vehicle Safety Standard No.214(FMVSS 214) compared with the bending load and displacement of KFRP by quasi-static test method. The applicability and limitation of bending load and displacement of KFRP according to specimen size has been discussed.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.42 no.3
• /
• pp.452-473
• /
• 2018

This study analyzed the expressions of racing girl uniforms that promote automobile brands shown at Seoul and Busan motor shows. The results are as follows. In each of the design components expression, the glossy and plain material, the achromatic color, and the dress style appeared most frequently in the uniform design of both domestic and foreign automobile brands. In the fashion image expression, sexy image appeared the most, followed by modern image, romantic image, active image, elegance image and ethnic image. Based on the analysis results, the following expressive characteristics were identified: First, sexy images were used in uniform design to express the streamline and speedy feeling of a car metaphorically. Second, modern image, glossy material, and achromatic color were used for a uniform design to express advanced technology and the future orientation of an automobile. Third, fashion images that match the automobile type emphasized the brand image of the car. Fourth, some of the manufacturers that prevailed in the automobile market promoted several automobile brands exhibited with a unified uniform design that expressed the design philosophy and concept. As such, the motor show racing girl uniform contributed to promoting automobile brand identity and the automobile industry.