• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.1144-1148
• /
• 1991

The problems occurred when developing a automatic wheel deburring system are to make effective flexibility in model change and the irregularity of the position/shape of the burr, to select optimal robotic manufacturing process and to develope optimal end effector. The locations where burr exists are on flange, rim and spoke. Here will be discussed the optimal solution for the removal of rim burr by using robot. The research can be summarized as the automatic robot path generation by recognizing rim contour and automatic deburring process technique. Various rim contour data is generated automatically when the sensor which is fixed to robot is moving with the parallel motion to the wheel center axis and this generated data is transferred to the data storage system and converted to the robot path data. The robotic tool system which is suitable to the rim deburring process is developed by integrating tool, compliance function and sensor. And factory automation system controlled by robot controller and PC is developed. This system shows good productivity and flexibility.

• 자동차안전학회지
• /
• 제10권4호
• /
• pp.33-39
• /
• 2018

Recently, the automobile industry has developed ADAS (Advanced Driver Assistance System) to prevent traffic accidents and reduce driver's driving burden. Among the ADAS, the LKAS (Lane Keeping Assistance System) is a support system for the convenience and safety of the driver, and the main function is to maintain the driving lane of the vehicle. LKAS is a system that uses radar sensor and camera sensor to collect information about the position of the vehicle in the lane and to support keeping the lane through control if necessary. In many countries, LKAS has already been commercialized and the convenience and safety of drivers have been improved. The international LKAS evaluation test procedure is being developed and discussed by standardization committees such as the ISO (International Organization for Standardization) and the Euro NCAP (New Car Assessment Program). In Korean, the LKAS test method is specified in the KNCAP (Korean New Car Assessment Program), but the evaluation method is not defined. Therefore, the LKAS test procedure that meets international standards and is suitable for domestic road environment is necessary. In this paper, development of LKAS test evaluation scenarios that meets international standards and considering domestic road environment, and the formula that can evaluate the result value after control as the relative distance of lane and the front wheel are suggested. And a comparative analysis was conducted to verify the validity of the suggested scenario and formula. The test evaluation was conducted using the vehicle equipped with the LKAS.

• 자동차안전학회지
• /
• 제4권2호
• /
• pp.32-36
• /
• 2012

The Automatic unmanned target object carrying system (AUTOCS) is developed for testing road vehicle radar and vision sensor. It is important for the target to reflect the realistic target characteristics when developing ASV or ADAS products. The AUTOCS is developed to move the pedestrian or motorcycle target for desired speed and position. The AUTOCS is designed that only payload target which is a manikin or a motorcycle is detected by the sensor not the AUTOCS itself. In order for the AUTOCS to have low exposure to radar, the AUTOCS is stealthy shaped to have low RCS(Radar Cross Section). For deceiving vision sensor, the AUTOCS has a specially designed pattern on outside skin which resembles the asphalt pattern. The AUTOCS has three driving modes which are remote control, path following and replay. The AUTOCS V.1 is tested to verify the radar detect characteristics, and the AUTOCS successfully demonstrated that it is not detected by a car radar. The result is presented in this paper.

• 한국정밀공학회지
• /
• 제26권6호
• /
• pp.74-80
• /
• 2009

Path tracking of unmanned vehicle is a basis of autonomous driving and navigation. For the path tracking, it is very important to find the exact position of a vehicle. GPS is used to get the position of vehicle and a direction sensor and a velocity sensor is used to compensate the position error of GPS. To detect path lines in a road image, the bird's eye view transform is employed, which makes it easy to design a lateral control algorithm simply than from the perspective view of image. Because the driving speed of vehicle should be decreased at a curved lane and crossroads, so we suggest the speed control algorithm used GPS and image data. The control algorithm is simulated and experimented from the basis of expert driver's knowledge data. In the experiments, the results show that bird's eye view transform are good for the steering control and a speed control algorithm also shows a stability in real driving.

• 제어로봇시스템학회논문지
• /
• 제21권9호
• /
• pp.881-887
• /
• 2015

The hardware-in-the-loop simulation (HILS) of a railway vehicle is crucial for overcoming the limitation of field tests of a railway vehicle. A brake HILS system for a railway vehicle was previously not able to test the performance of a speed-sensing system of a railway vehicle, since wheelset speeds were generated only by computer simulations. In this paper, we present a novel wheelset speed implementation of a brake HILS system for a railway vehicle. Four wheelset speeds of a brake HILS system for a car of a railway vehicle are implemented using four small-sized servomotors, whereas the speed sensors and pole wheels used in the brake HILS system are the actual ones of the railway vehicle. According to the simulated speeds of four wheelsets in the dynamic equations of motion, four servomotors generate wheel speeds in real time, and then the measured wheelset speeds are fed back to the computer simulation model. Moreover, in this paper, we improve the performance of wheelset speed measurement via the T method instead of the M method presently used in the field. The performances of wheelset speed implementation and speed-sensor operation are demonstrated by experimental works using a HILS system.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2021년도 추계학술대회
• /
• pp.208-210
• /
• 2021

인터넷에 연결되는 사물의 수가 급격히 증가함에 따라 센서와 통신 기능을 포함해서 단순 모니터링 기능을 하거나, 서버로 전달하는 기능에서 벗어나 점점 인간에게 직접 가치를 제공하는 지능형 디바이스 개발 사업이 확장되고 있다. 따라서 디바이스가 주변 센싱 정보를 분석해서 주변 환경을 사용자들의 기호나 안전을 고려해서 변경하는 기술을 개발할 전망으로. 공기를 이용하여 다양한 효과를 가져올 수 있는 개발 제품에 생체신호 측정 시스템을 구축함으로써, 착좌 시 압력 분포의 변화 패턴을 통해 사용자의 상태를 파악할 수 있게 할 예정이다. 온도측정 센서와 사용자의 접촉을 통해 에어카시트 사용에 쾌적함을 높이고, 본 논문에서는 생체신호 측정 데이터에 의한 에어펌프 제어 시스템을 연계하여 구축하여 측정된 생체신호는 스마트폰 애플리케이션을 통해 보호자가 확인 및 조절을 할 수 있도록 하여 효과적으로 관리가 가능한 구축 시스템을 제안한다.

• 제어로봇시스템학회논문지
• /
• 제11권5호
• /
• pp.463-470
• /
• 2005

This paper describes a method aimed at improving dead-reckoning accuracy with gyroscopes in mobile robots. The method is a precision calibration procedure for gyroscopes, which effectively reduces the ill effects of nonlinearity of the scale-factor and temperature dependency. This paper also describes the methods of gyro data collection fur all ambient temperature$(-40^{\circ}C{\~}+80^{\circ}C)$ using cubic spline interpolation and defining the error function. The sensor used was a vibrating gyroscope called the EWTS82NA21, which is low lost and commonly used in car navigation system, made by Panasonic. This angular rate sensor utilizes Coriolis force generated by a vibrating tuning fork. The paper also provides experimental results to check the performance and the effectiveness of the proposed method.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.293-298
• /
• 1993

In ground vehicles, the increasing demand for safety and ride comfort which are trade-off relation, especially at high speeds, has led to the development od actively controlled suspensions. The LQG/LTR controller can be used to design a robust feedback control system that deals with disturbance rejection properties as well as insensitivity to modelling errors and sensor noise. And when the disturbance can not be measured but is limited within a certain frequency range, a bandpass feedback to eliminate the disturbance response can be used. In this paper, hybrid controller cosisted of bandpass feedback controller and LQG/LTR controller is applied to a quarter-car model moving on a randomly profiled road. The random road profile considered as colored noise is shaped from white noise by use of shaping filter. The performance of the hybrid control system is compared with that of an LQG/LTR controlled system.

• 제어로봇시스템학회논문지
• /
• 제15권11호
• /
• pp.1150-1156
• /
• 2009

The spread of wireless Internet technology development and applications with location information in the form of location-based services are more varied. In particular, where you recognize the location of objects such as people and things, and to provide valuable services based on ubiquitous, location-based services (Ubiquitous Location Based Services: u-LBS) is emerging as an important service. In this paper precise location data to the car crash through the location and offers related service system. In this paper the precise location tracking proposed by the concept of the Rail, road, to extract the location Data Matching Data and the current location is obtained. System used in GPS Packet and information about the location of the vehicle collision and the collision time, the vehicle consists of NodeID is about. Using these data, a packet is to be created when the conflict between vehicles in the vehicle will be sent to Gateway. Gateway to the packets that were sent from the Server to determine whether the conflict is that in an emergency situation, Emergency Center for location information and let me know whether or not the conflict will be measured. Also, for those on the outside of an emergency such as a family related to the wireless terminal wireless (PDA, cell phone) is to let me know. Server get into the conflict that was configured to store information on the Database. Additionally, the proposed u-LBS system to verify the validity of the experiment was performed.

• 대한기계학회논문집A
• /
• 제38권3호
• /
• pp.315-321
• /
• 2014

본 논문은 전자제어식 조향 및 제동 장치를 장착한 차량에 대해 고장 안전 기능을 가지는 통합 섀시 제어 시스템을 제안한다. 통합 섀시 제어 시스템에서 상위 제어기는 슬라이딩 모드 제어 이론을 이용하여 제어 요모멘트를 만들어 낸다. 하위 제어기는 가중 의사-역행렬 기반 제어 분배 방법(WPCA)으로 제어 요모멘트를 전자제어식 조향 및 제동 장치의 타이어 힘으로 분배한다. WPCA 의 가변 가중치를 조절하여 구동기 혹은 센서의 고장에 대처할 수 있다. 이러한 상황에서 WPCA 방법으로 가변 가중치를 최적화하여 요모멘트 분배 성능을 향상시키기 위해 시뮬레이션을 이용한 최적화 방법을 제안한다. 제안된 방법의 타당성을 검증하기 위해 차량 시뮬레이션 패키지인 CarSim 에서 시뮬레이션을 수행한다.