• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.11 no.1
• /
• pp.33-40
• /
• 2005

This study was carried out for effective utilization of recycling resources to investigate the repulping conditions of car air filter waste paper and to evaluate the application into corrugating medium papermaking by blending these repulped pulps. Car air filter waste paper was made of virgin BKP and it was dipped into phenol resin solution. It was well disintegrated by laboratory Valley beater with 10%(basis on oven-dried pulp weight) NaOH addition and defoamer usage. The optimal temperature, beating consistency and treatment time were mainly $40^{\circ}C$, 1% and $30{\sim}40$ minutes, respectively. Handsheets were prepared with various blending ratios between air filter recycled pulp and KOCC. In the case of $10{\sim}20%$ substitution with air filter recycled pulp, physical properties reductions as compressive strength and burst strength of sheets were lower than others. These results showed more favour than the partial substitution of KOCC for corrugating medium even though some strength reduction of paper. It was also observed that the waste water of air filter recycling was not affective to environmental problems.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.5 s.170
• /
• pp.113-120
• /
• 2005

Because of the turbulent markets and the increasing demand on product quality, the application of new technology to practice is increasingly important. In case of automotive industries, they take interest in laser welding to solve these problems because laser welding has many advantages such as good accessibility, welding quality, fast welding speed and so on. To apply this technology to welding of car body, the data of laser welding are collected through lots of the experiment according to the material, geometry and layer number of welding points. Based on the experiment results and the information of product, i.e. the car side panel, the clustering of stitches for laser welding was carried out and the optimal equipments are selected through the comparison between the requirements of welding and the potential of equipments. Using these results, laser welding cell for the car side panel are configured with the concept of the digital manufacturing, which ensures maximum planning security with visualization and simulation. Finally, the optimal laser welding cell is chosen by the evaluation of alternative cells with assessment criteria.

• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.6
• /
• pp.703-709
• /
• 2019

This paper proposes a monitoring and remote control system, an essential part of In Vehicle Infotainment (IVI) and Human Vehicle Interface (HVI) to provide safety and convenience to a driver. The system utilizes Bluetooth for a short range communication and utilizes WCDMA for a long range communication to enhance efficiency. In this paper, an integrated controller, which integrates a CAN communication module, a Bluetooth communication module, a WCDMA communication module, is designed to control a car. Also, a remote server for managing data is designed to provide real-time monitoring and remote control for a user via smart devices. Experiment results show that all the proposed remote control, driving log, real-time monitoring, and diagnostics functions are working properly. With the proposed system, a driver can drive safely by monitoring and inspecting a car before driving via smart devices, and control conveniently by controlling a car remotely.

• Journal of KIISE
• /
• v.41 no.11
• /
• pp.982-991
• /
• 2014

The integrity assurance of recorded video by car black boxes are necessary as the car black box is becoming more popular. In this paper, we propose a video data integrity assurance scheme reflecting the features of car black box. The proposed method can detect any kind of deletion, insertion, modification of frames by cyclic chaining using inter block relation. And, it provides the integrity assurance function consistently even in cases of file overwriting because of no more free space in storage, partial file data lost. And non-repudiation is supported. Experimental results with a car black box embedded system with A8 application processor show that our method has a feasible computational overhead to process full HD resolution video at 30 frames per second in a real time.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.4
• /
• pp.248-255
• /
• 2018

It is known that the road noise on the rear seat of a hatchback type car is worse than that of a sedan type car because of the weakness on sealing structure. Therefore, a sound sealing system and sufficient absorption/insulation performance are required. In the case of a compact segment car, however, the application of the sufficient absorption and insulation materials is limited, because of the restriction on the production cost and weight of the car. In this study, we estimate the noise transmission path on the vehicle's body structure from tires and ground using the PBNR (Power Based Noise Reduction) method which is useful in quantitative measurement. Based on these results, we suggest an alternative absorption/insulation method for the better performance of rear seat road noise reduction in a compact hatchback car.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.241-243
• /
• 2016

In the Past, Trend of car security was Physical Something like doorlock system, and The Generation did not have skills connecting External devices. Through Car Development is up, that trend of car security Changed Physical Security to Intelligence Security. This Changes give a chance to hackers to attack this system. This System use CAN(Controller Area Network) Protocol which have three vulnerabilities. First, ID Spoofing, Twice, D - Dos Attack, Third, Android Application Injected Modern cars have many ECU(Electronic Control Unit) to control devices like Engine ON/OFF, Door Lock Handling, and Controlling Handle. Because CAN Protocol spread signal using broadcast, Hackers can get the signal very easily, and Those often use Mobile devices like Android or IOS to attack this system. if bluetooth signal is spread wide, hackers get the signal, and analysis the bluetooth data, so then They makes certain data to attack ECU, they send the data to ECU, and control ECU installed car. so I suggest that I will prevent this attack to make Auth system and prevent this attack in end of Android.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.4
• /
• pp.389-396
• /
• 2013

Objective: The ride qualities of the six passenger cars were evaluated in 4 subjects on the highway and uneven road. The relation between vibration with driving velocity and driving posture were also investigated separately. Background: Ride comfort plays an important role in the vehicle design. Vibration is the one of the principal components associated with ride comfort. Method: The acceleration of the foot, hip and back were measured using B&K accelerometers in this study. The velocity of the passenger cars was maintained at a constant speed of 80km/h on the highway and 40km/h on the uneven road. For evaluating the effects of driving velocity and driving posture on vehicle's vibration level, separate experiments were performed on the highway with 5 different vehicle speeds and 5 different backrest angles, respectively. Results: The overall ride value of the luxury car showed the best result while the smaller car showed the worst value on the highway. On the uneven road the overall ride value level was increased 75~98%. All the vehicles had the SEAT value less than 1. Faster the velocity lowers the SEAT value. The ride quality in terms of vibration gets worst when the backrest angle increased. Conclusion: The smaller car had a first mode at the higher frequency and showed higher vibration level. SEAT value was mostly affected by the seat property not by vehicle. We ranked the luxury car seat had a best vibration reduction quality than others based on SEAT values. When the driving velocity increased, the overall ride values were increased proportionally and the SEAT values were somewhat decreased. Application: Evaluation of whole-body vibration in the passenger car.

• Journal of Climate Change Research
• /
• v.7 no.1
• /
• pp.85-93
• /
• 2016

This study the efficiency of greenhouse gas reduction of 'low carbon car collaboration fund' and its alternative 'control of average fuel efficiency and greenhouse gas', and 'improving driving behavior' were analyzed by using LEAP, long term energy analysis model. Total 4 scenarios were set, baseline scenario, without energy-saving activity, 'low carbon car collaboration fund' scenario, 'fuel efficiency improving scenario', and 'improving driving behavior' scenario. The contents of analysis were forecast of energy demand by scenario and application as well as reduction of greenhouse gas emission volume, and the period taken for analysis was every 1 year during 2015~2030. Baseline scenario, greenhouse gas emission volume in 2015 would be 7,935,697 M/T and 13,081,986 M/T in 2030, increased 64.8%. The analysis result was average annual increase rate of 3.4%. The expected average annual increase rate of other scenarios was, 'low carbon car collaboration fund' scenario 1.7%, 'fuel efficiency improving' scenario 3.0%. and 'improving driving behavior' scenario 3.4%. and these were each 1.7%, 0.3%. 0.3% reduce from baseline scenario. The largest reduction was 'low carbon car collaboration fund' scenario, and there after were 'fuel efficiency improving scenario', and 'improving driving behavior' scenario.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.1 no.1
• /
• pp.37-44
• /
• 1978

The purpose of this study is to search for an efficient application method in solving delay-phenomenon problems which influence upon total production cost through case study. The method of this study is an experimental study based on cutting time data in lead cutting operations from "Lead Cutting Machine (Stripper)" and its service rate data from a large electronic products company which utilizes conveyor line system for the products "Car Stereo" The procedure of this experimental study is as follows; 1) Using loading(Man-Hour) analysis technique j,1 order to analyse and evaluate Production capacity, efficiency, operation and idle rate assembly charge, waiting and service cost -when its are controlled by stripper operator(server) 2) Establishing adequate waiting time model of finite population caused by the interference of 4 stripper machine which is drawn from mathematical statistics testing, that is, goodness of fit test in the waiting and service rate and to search for optimal solution by utilizing the above mentioned model The experimental result was that amount to 8,546,618won Per year was brought down, that is, by optimum point, it shows a decrease as compared with Present point. The major limitation of this experimental study is that the Queue in the Finite Population, so to speak. it comes from the interference of 4 stripper machine dealt with this case were limited only on the Car Stereo conveyor line. Further study of application of this application method to the areas such as material handling, personnel management marketing and transportation management is strong1y recommended.trong1y recommended.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.3
• /
• pp.1-17
• /
• 2018

Over the past five years (2010-2014), the total number of traffic accidents has decreased from 226,878 to 223,552 with decrease of 0.37 percent each year. The death toll has also decreased from 5,505 to 4,762. However, the number of rental car accidents and fatalities has been steadily increased. Despite of its growth, no previous study has been conducted on rental car accident severity. This study analyzed data of 18,050 rental car accidents in South Korea collected from 2010 to 2014 and then processed in order to identify which factors could affect the accident severity. Seventeen factors related to rental car accident severity were grouped into four categories: driver, vehicle, roadways and environment. As a result of the ordered probit model analysis, fourteen variables excluding age, intersection, and day of week were found to affect the severity of rental car accidents. The results of the study summarized as follows. First of all, violation of traffic regulations such as speeding increase the severity of rental car accidents. Secondly, rental accident severity is higher at curved sections of complicated roadway, which the driver's field of view is impaired. The results of this study can be used to reduce the severity of rental car accidents in transportation safety.