• 제목/요약/키워드: Capture Simulation

검색결과 405건 처리시간 0.025초

순서회로를 위한 경계면 스캔 구조에서의 지연시험 연구 (A Study of Delay Test for Sequential circuit based on Boundary Scan Architecure)

  • 이창희;김정환;윤태진;남인길;안광선
    • 한국정보처리학회논문지
    • /
    • 제5권3호
    • /
    • pp.862-872
    • /
    • 1998
  • 본 논문에서는 경계면 스캔 구조에서의 클럭 입력을 갖는 순서회로를 위한 지연시험 구조와 지연시험 절차를 개발하였다. 지연시험 대상회로가 클럭 입력을 갖는 순서회로일 경우, 기존의 경계면 스캔 구조에서의 지연시험은 중복패턴의 입력, 클럭 입력과 데이터 입력과의 시간 간격과, 패턴 입력과 응답값 캡쳐까지의 시간 문제에 의해 적절치 않음을 보였다. 본 논문에서 제안하는 ARCH-S는 클럭 카운팅 기술을 이용하여 정해진 수의 클럭을 대상회로의 클럭 입력선에 적용시킴으로써 대상회로에 입력되는 입력 패턴의 중복을 피할 수 있다. 또한 대상회로를 정상 속도에서 동작할 수 있도록 시스템 클럭을 TCK로 사용한다. 연속적인 클럭 발생에 TCK를 사용함으로써 대상회로를 정상 속도에서 검증할 수 있다. 제안된 ARCH-S 구조는 시뮬레이션을 통해 동작의 정확성과, 기존의 구조와 비교하여 향상된 성능을 가짐을 확인하였다.

  • PDF

적합직교분해를 이용한 로터 블레이드의 차수축소모델 구축 및 공력특성 분석 (Efficient Analysis of the Aerodynamic Characteristics of Rotor Blade Using a Reduced Order Model Based on Proper Orthogonal Decomposition Method)

  • 정성기;느고콩덕;양영록;조태환;명노신
    • 한국항공우주학회지
    • /
    • 제37권11호
    • /
    • pp.1073-1079
    • /
    • 2009
  • 본 연구에서는 전진 비행하는 헬리콥터 로터 블레이드 표면의 압력장에 대한 공력 특성 분석 및 차수축소모델 구축을 위해 적합직교분해 (POD) 방법을 이용하였다. 에너지가 큰 특정 모드를 기반으로 전진 비행하는 비정상 로터 블레이드에 대한 공기역학적 특성을 분석하였으며, CFD 계산 결과의 검증을 위해 제자리비행에 대한 실험 결과와 비교하였다. 수렴속도를 향상시키기 위해 Multi-grid 기법을 사용하였으며, 회전하는 로터 블레이드 주위의 비정상 유동을 모사하기 위해 슬라이딩 격자를 이용하였다. 그 결과 240개의 Snapshot에 대해 에너지율 99% 이상을 포함하는 지배적인 POD 모드 7개가 선정되었으며, POD 모드와 전개 계수를 이용하여 차수축소모델을 성공적으로 구축하였다.

정성적 모델에 기초한 비교분석의 확장 기법 (An Extension Technique of Comparative Analysis based on Qualitative Model)

  • 김현경
    • 지능정보연구
    • /
    • 제12권4호
    • /
    • pp.51-60
    • /
    • 2006
  • 정성적 추론은 자연 세계에 대한 정성적, 직관적인 지식을 밝혀내어 코드화하는 목표를 갖고 연구되어 왔다. 정성적 추론은 전자, 기계 등의 도메인에서 성공적으로 사용되어 그 실효성을 입증할 수 있었으나, 대부분의 추론은 시뮬레이션에 집중되어 왔다. 본 연구에서는 주어진 상황에서 변화가 발생했을 때, 이 변화가 어떻게 영향을 미치며 파급되는지를 예측할 수 있는 정성적 비교분석 기법을 소개하고자 한다. 본 연구에서는 파라미터의 상대적인 변화의 파급만을 예측한 기존의 연구에 상대적 변화의 증가율 변화에 대한 추론을 추가하여 확장하였다. 상대적인 주어진 상황에 대한 인과모델이 정성적 분야 모델로부터 형성되고, 여기에 비교분석 추론 기법을 적용하여 변화의 연쇄적인 인과 관계를 추적하게 된다. 이러한 기법은 변화의 예측 뿐 아니라, 이런 변화를 이끌어낸 인과 관계를 설명하는 기능을 제공하게 되어, 디자인, 진단, 지능형 교육 시스템, 환경 영향평가 등에 이용되리라 기대된다.

  • PDF

게임 캐릭터를 위한 자동동작생성기의 개발과 응용 (Development and Application of Automatic Motion Generator for Game Characters)

  • 옥수열;강영민
    • 한국정보통신학회논문지
    • /
    • 제12권8호
    • /
    • pp.1363-1369
    • /
    • 2008
  • 게임과 캐릭터 애니메이션의 발전으로 캐릭터의 동작을 사실적으로 표현하는 기술은 다양한 분야에서 요구되었다. 이에 따라 사실적인 캐릭터 동작을 생성하는 다양한 방법에 대한 연구가 활발히 진행되어 왔다. 캐릭터의 동작을 생성하는 방법은 숙달된 사용자가 캐릭터의 움직임을 지정하는 방식과 동역학 등의 물리적 법칙을 활용하여 동작을 시뮬레이션하는 방법, 모션 캡쳐 등과 같은 입력장치를 이용하여 배우의 움직임을 측정하여 데이터로 만드는 방법 등이 있다. 이러한 기법들을 이용하여 생성된 동작들은 각각의 방법마다 나름의 장점이 있지만, 제어가 힘들다는 공통적인 단점을 가지고 있다. 사용자에게 가장 편리한 제어를 제공하기 위해서는 사실적인 동작을 고수준 매개변수를 이용하여 생성할 수 있어야 하며, 이러한 동작의 변형 역시 고수준 매개 변수를 통해 이루어져야 한다. 본 논문은 고수준 매개변수(high-level parameter)를 이용하여 캐릭터의 동작을 효율적으로 제어할 수 있는 자동화된 도구의 개발 방법을 제안하며, 이러한 자동 동작 생성 도구를 활용하여 실제 게임을 제작하는 데에 필요한 기술을 소개한다.

IEEE 1149.1의 실시간 신호 시험 구조 설계 (Design of Run-time signal test architecture in IEEE 1149.1)

  • 김정홍;장영식;김재수
    • 한국컴퓨터정보학회논문지
    • /
    • 제15권1호
    • /
    • pp.13-21
    • /
    • 2010
  • 보드에 장착된 소자들을 테스트하기위해 제안된 IEEE 1149.1 시험 구조는 입력으로 TDI 핀을 사용하고 출력으로 TDO 핀을 사용하는 커다란 직렬 쉬프트 레지스터이다. IEEE 1149.1은 보드 수준에서의 테스트는 완벽하게 수행하지만 보드가 시스템에 장착되고 난 후의 수행 중인 시스템 수준에서의 실시간 동작클럭 속도로의 테스트에는 문제가 있다. 즉시험대상 핀의 실시간 동작신호를 시험하기 위하여 직렬 시프트 레지스트 체인들의 출력속도를 동작 클럭의 쉬프트레지스터 배수 이상의 속도로 작동 하여야 한다. 본 논문에서는 시스템 클럭과 동일한 속도로 실시간 신호를 캡쳐하기 위한 실시간 신호 시험 구조를 설계하고 시험 절차를 제안하였다. 제안한 실시간 신호 시험 구조를 Altera의 Max+Plus 10.0을 사용하여 제안한 시험 절차에 따라 시뮬레이션을 수행하였으며, 이를 통해 제안한 시험구조가 정확히 동작함을 확인하였다.

Assembly Neutron Moderation System for BNCT Based on a 252Cf Neutron Source

  • Gheisari, Rouhollah;Mohammadi, Habib
    • 한국의학물리학회지:의학물리
    • /
    • 제29권4호
    • /
    • pp.101-105
    • /
    • 2018
  • In this paper, a neutron moderation system for boron neutron capture therapy (BNCT) based on a $^{252}Cf$ neutron source is proposed. Different materials have been studied in order to produce a high percentage of epithermal neutrons. A moderator with a construction mixture of $AlF_3$ and Al, three reflectors of $Al_2O_3$, BeO, graphite, and seven filters (Bi, Cu, Fe, Pb, Ti, a two-layer filter of Ti+Bi, and a two-layer filter of Ti+Pb) is considered. The MCNPX simulation code has been used to calculate the neutron and gamma flux at the output window of the neutronic system. The results show that the epithermal neutron flux is relatively high for four filters: Ti+Pb, Ti+Bi, Bi, and Ti. However, a layer of Ti cannot reduce the contribution of ${\gamma}$-rays at the output window. Although the neutron spectra filtered by the Ti+Bi and Ti+Pb overlap, a large fraction of neutrons (74.95%) has epithermal energy when the Ti+Pb is used as a filter. However, the percentages of the fast and thermal neutrons are 25% and 0.5%, respectively. The Bi layer provides a relatively low epithermal neutron flux. Moreover, an assembly configuration of 30% $AlF_3+70%$ Al moderator/$Al_2O_3$ reflector/a two-layer filter of Ti+Pb reduces the fast neutron flux at the output port much more than other assembly combinations. In comparison with a recent model suggested by Ghassoun et al., the proposed neutron moderation system provides a higher epithermal flux with a relatively low contamination of gamma rays.

3D 볼류메트릭 모델의 동적 복원 알고리즘 (Dynamic Reconstruction Algorithm of 3D Volumetric Models)

  • 박병서;김동욱;서영호
    • 방송공학회논문지
    • /
    • 제27권2호
    • /
    • pp.207-215
    • /
    • 2022
  • 최신 볼류메트릭 기술이 제공하는 높은 기하학적 정확도와 사실성은 실제 객체와 캡춰된 3D 모델 간 높은 일치도를 보장한다. 그럼에도 불구하고 이렇게 획득된 3D 모델은 프레임 간 완전히 독립적인 3D모델로 시퀀스를 구성하고 있다는 측면에서, 매 프레임 모델 표면 구조(Geometry)의 일관성이 보장 되지 않으며, 정점(Vertex)의 밀도가 매우 높고 정점 간 연결 노드(Edge)가 매우 복잡해지는 특징을 확인 할 수 있다. 이 기술을 통해 생성된 3D 모델은 영화나 비디오 게임 제작 파이프라인에서 제작된 모델과는 본질적으로 다르며, 실시간 렌더링, 애니메이션 및 시뮬레이션, 압축과 같은 응용 분야에서 직접 사용하기에 적합하지 않다. 이와는 대조적으로 우리의 방법은 프레임 간 3D 모델 표면 구조의 높은 일관성을 확보하는 리메싱(Remeshing)과 비강체 표면(Non-rigid Shape)의 대응(Correspondences) 및 매칭(Matching)을 통한 점진적 변형(Deformation) 과정 및 텍스쳐 전달(Texture Transfer) 과정을 연결함으로서 볼류메트릭 3D 모델 시퀀스 품질의 일관성을 유지하며, 후 처리 과정의 자동화를 제공한다.

상부 대류권-하부 성층권 오존이 성층권 준 2년주기 진동과 매든-줄리안 진동 상관성에 미치는 영향: GloSea5 이용 사례 (Influence of UTLS Ozone on the QBO-MJO Connection: A Case Study Using the GloSea5 Model)

  • 오지영;손석우;백승윤
    • 대기
    • /
    • 제32권3호
    • /
    • pp.223-233
    • /
    • 2022
  • Recent studies have shown that Madden-Julian Oscillation (MJO) is modulated by Quasi-Biennial Oscillation (QBO) during the boreal winter; MJO becomes more active and predictable during the easterly phase of QBO (EQBO) than the westerly phase (WQBO). Despite growing evidences, climate models fail to capture the QBO-MJO connection. One of the possible reasons is a weak static stability change in the upper troposphere and lower stratosphere (UTLS) by neglecting QBO-induced ozone change in the model. Here, we investigate the possible impact of the ozone-radiative feedback in the tropical UTLS on the QBO-MJO connection by integrating the Global Seasonal Forecasting System 5 (GloSea5) model. A set of experiments is conducted by prescribing either the climatological ozone or the observed ozone at a given year for the EQBO-MJO event in January 2006. The realistic ozone improves the temperature simulation in the UTLS. However, its impacts on the MJO are not evident. The MJO phase and amplitude do not change much when the ozone is prescribed with observation. While it may suggest that the ozone-radiative feedback plays a rather minor role in the QBO-MJO connection, it could also result from model biases in UTLS temperature and not-well organized MJO in the model.

Performance Optimization and Analysis on P2P Mobile Communication Systems Accelerated by MEC Servers

  • Liang, Xuesong;Wu, Yongpeng;Huang, Yujin;Ng, Derrick Wing Kwan;Li, Pei;Yao, Yingbiao
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제16권1호
    • /
    • pp.188-210
    • /
    • 2022
  • As a promising technique to support tremendous numbers of Internet of Things devices and a variety of applications efficiently, mobile edge computing (MEC) has attracted extensive studies recently. In this paper, we consider a MEC-assisted peer-to-peer (P2P) mobile communication system where MEC servers are deployed at access points to accelerate the communication process between mobile terminals. To capture the tradeoff between the time delay and the energy consumption of the system, a cost function is introduced to facilitate the optimization of the computation and communication resources. The formulated optimization problem is non-convex and is tackled by an iterative block coordinate descent algorithm that decouples the original optimization problem into two subproblems and alternately optimizes the computation and communication resources. Moreover, the MEC-assisted P2P communication system is compared with the conventional P2P communication system, then a condition is provided in closed-form expression when the MEC-assisted P2P communication system performs better. Simulation results show that the advantage of this system is enhanced when the computing capability of the receiver increases whereas it is reduced when the computing capability of the transmitter increases. In addition, the performance of this system is significantly improved when the signal-to-noise ratio of hop-1 exceeds that of hop-2.

인구 고령화가 실질 금리에 미치는 영향 (Impacts of Population Aging on Real Interest Rates)

  • 김명현;권오익
    • 경제분석
    • /
    • 제26권1호
    • /
    • pp.133-166
    • /
    • 2020
  • 우리나라는 1990년대 중반부터 인구 고령화가 급속히 진행되었으며 실질 금리도 꾸준히 하락하였다. 이러한 점을 감안하여 본 연구는 인구 고령화가 실질 금리에 미친 영향에 대해 분석하였다. 먼저 간단한 회귀분석을 통해 기대수명 및 노령인구 부양비율 증가, 인구 증가율 감소 등이 실질 금리 하락에 통계적으로 유의한 영향력을 가지고 있다는 것을 실증적으로 보였다. 이러한 실증 근거에 기반하여 생애주기모형을 구축하고 모형 내의 인구 증가율 및 노령인구 부양비율이 1990년대 중반 이후의 우리나라의 실제 데이터와 유사하게 움직일 경우 실질 금리가 어떻게 변동하지를 시뮬레이션해 보았다. 시뮬레이션 결과, 모형 내의 실질 금리가 1995년 약 9%에서 2018년 약 6%로 하락하는데 이는 실제 실질 금리 하락 폭의 약 3분의 1에 해당한다. 아울러 기대수명이 늘어나는 것이 인구 증가율이 감소하는 것보다 실질 금리 하락에 더 큰 영향을 미쳤던 것으로 나타났다.