• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.251.2-251.2
• /
• 2010

Plant biomass has been proposed to be an alternative source for petroleum-based chemical compounds. Especially, phenolic chemical compounds can be obtained from lignin by chemical depolymerization processes because lignin consists of complex aromatic polymer such as trans-p-coumaryl, coniferyl and sinapyl alcohols, etc. Phenolic chemical compounds from lignin were usually produced in super critical water. However, we applied Near-critical water (NCW) system because NCW is known as a good solvent for lignin depolymerization. Organic matter like lignin can be solved in NCW system and the system has a unique acid-base property without conventional non-eco-friendly chemicals such as sulfuric acid and sodium hydroxide. In this work, we tried to optimize the NCW depolymerization system by adjusting the processing variables such as reaction time, temperature and pressure. Moreover, the amount of additional phenol was optimized by changing the molar ratio between water and phenol. Phenol was used as capping agent to prevent re-polymerization of active fragment such as formaldehyde. Alkali-lignin was used as a starting material and characterized by a Solid State 13C-NMR, FT-IR and EA (Elemental Analysis). GC-MS analysis confirmed that o-cresol, p-cresol, anisole and 4-hydroxyphathalic acid were the main product and they were quantitatively analyzed by HPLC.

• Bulletin of the Korean Chemical Society
• /
• 제33권9호
• /
• pp.2830-2844
• /
• 2012

This review covers recent developments in our group regarding the synthesis, characterization and applications of single-crystalline one-dimensional nanostructures based on a wide range of material systems including noble metals, metal silicides and metal germanides. For the single-crystalline one-dimensional nanostructures growth, we have employed chemical vapor transport approach without using any catalysts, capping reagents, and templates because of its simplicity and wide applicability. Au, Pd, and Pt nanowires are epitaxially grown on various substrates, in which the nanowires grow from seed crystals by the correlations of the geometry and orientation of seed crystals with those of as-grown nanowires. We also present the synthesis of numerous metal silicide and germanide 1D nanostructures. By simply varying reaction conditions, furthermore, nanowires of metastable phase, such as $Fe_5Si_3$ and $Co_3Si$, and composition tuned cobalt silicides (CoSi, $Co_2Si$, $Co_3Si$) and iron germanides ($Fe_{1.3}Ge$ and $Fe_3Ge$) nanowires are synthesized. Such developments can be utilized as advanced platforms or building blocks for a wide range of applications such as plasmonics, sensings, nanoelectronics, and spintronics.

• Transactions on Electrical and Electronic Materials
• /
• 제9권2호
• /
• pp.47-51
• /
• 2008

In this paper, thermal stability of Nickel silicide formed on p-type silicon wafer using Ni-V alloy film was studied. As compared with pure Ni, Ni-V shows better thermal stability. The addition of Vanadium suppresses the phase transition of NiSi to $NiSi_2$ effectively. Ni-V single structure shows the best thermal stability compared with the other Ni-silicide using TiN and Co/TiN capping layers. To enhance the thermal stability up to $650^{\circ}C$ and find out the optimal thickness of Ni silicide, different thickness of Ni-V was also investigated in this work.

• 대한장애인치과학회지
• /
• 제12권2호
• /
• pp.45-49
• /
• 2016

This study investigates the success rate of pulpotomy using electrosurgery operated on a primary molar in caries. The pulpotomy using electrosurgery was done on 253 primary molars of 111 young patients from 2 to 9 years old during the period of the first day of January 2011 to the last day of December 2015. After the amputation of pulp and hemostasis of primary molar were done using electrosurgery, MTA as pulp capping material was applied to the primary molar and the tooth was restored with the stainless steel crown. The follow up period after the treatment ranged from 4-46 months. The clinical and radiographic success rate ranged from 92.1 - 94.3%. Which is comparable to formocresol and ferric sulfate pulpotomy. Due to its non-pharmacological characteristic, electrosurgery can minimize harmful effect on the pulp tissue. Its fast bleeding control makes it easy and safe to use in pediatric and disabled patients in comparatively simple manner. Electrosurgery can be an alternative for pulp therapy considering the side effects of pharmacological ways.

• 한국정보통신학회논문지
• /
• 제16권5호
• /
• pp.1029-1034
• /
• 2012

본 논문에서는 US-PCS(US-personal communications services)를 위해 사용이 가능한 저가격 고성능 FBAR (film bulk acoustic resonator) 듀플렉서(duplexer) 모듈(module)을 제시하였다. FBAR 소자는 일반적인 실리콘(Si) 기반의 공정보다 가격경쟁력이 우수한 유리(glass) 웨이퍼 기반의 패키지를 개발하여 적용하였다. FBAR 듀플렉서 모듈의 전송단(Tx)과 수신단(Rx)에서 얻어진 최대 삽입손실 특성은 각각 1.9 dB와 2.4 dB이다. 전송단 및 수신단 FBAR 소자와 본딩(bonding)된 유리 기반의 웨이퍼 및 PCB 기판과 몰딩(molding) 물질을 모두 포함하는 FBAR 듀플렉서 모듈의 전체 두께는 1.2 mm이다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제9권3호
• /
• pp.9-12
• /
• 2007

In this study. we searched for the mechanical and electrical properties of laminated coated conductors with stabilizer tape. Stabilizer tape plays a role for mechanical and electrical stability and environmental protection. Cu material stabilizer was laminated to Ag capping layer on SmBCO conductor layer. This architecture allows the wire to meet operational requirements including the stressless at cryogenic temperature and winding tension as well as mechanical bending requirements including thermal and electrical stability under fault current conditions. First, we have experimentally studied mechanical bonding properties of the laminated Cu stabilizers on SmBCO coated conductors. We have laminated SmBCO coated conductors by continuous dipping soldering process, Second, we have investigated electrical properties of the SmBCO coated conductors with stabilizer lamination. We evaluated bonding properties, peeling strength and critical current for laminated SmBCO coated conductors with Cu stabilizers.

• 대한소아치과학회지
• /
• 제45권3호
• /
• pp.344-353
• /
• 2018

이 연구의 목적은 mineral tiroxide aggregate의 긴 경화시간과 치아변색 등의 단점으로 인해 이를 대체하고자 최근 주목받고 있는 재료인 tricalcium silicate를 기반으로 한 치수복조제 중 Biodentine의 미세누출과 최종수복제로 가장 많이 쓰이는 composite resin간의 전단결합강도에 대하여 경화시간에 따른 차이를 비교 평가하는 것이다. 미세누출 평가를 위해 소 치아 70개를 이용하여 순면에 와동을 형성한 후 Biodentine을 충전하고 무작위로 10개씩 하위 군으로 나누어 12분, 45분, 24시간, 48시간, 1주일, 2주일, 1개월로 경화시간을 달리한 후 상방에 composite resin을 적용하여 시편을 제작하였다. 미세누출 평가를 위해 표본을 24시간 동안 0.5% fuchsin 용액에 침적한 뒤, 수세하고 건조하여 각 표본을 수주 하 디스크를 이용해 절반으로 나누어 20배의 비율로 실체현미경(Olympus SZ61, Olympus, Tokyo, Japan)을 사용하여 관찰하였다. 전단결합강도 평가를 위해 중심구를 가진 아크릴 레진 블록을 210개를 제작하고 중심구에 Biodentine을 채운 후 각각 30개씩 7개 군으로 나누어 12분, 45분, 24시간, 48시간, 1주일, 2주일, 1개월 경화시간 경과 후 상방에 composite resin을 적용하여 시편을 제작하였다. Universal testing machine을 이용하여 경화시간에 따른 전단결합강도를 측정하였다. 연구결과, 미세누출에 있어서 24시간 이상 Biodentine 경화 후 상방에 composite resin 수복을 시행한 경우 미세누출을 최소화 하는 것으로 나타났다. 또한 전단결합강도에 있어서도 Biodentine의 경화시간이 24시간 이상일 경우 composite resin의 중합수축을 상쇄할 수 있는 전단결합강도가 측정되었다. composite resin 수복 전 Biodentine을 24시간 이상 경화시키는 것이 임상적으로 더 나은 결과를 나타낼 것이다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.1092-1095
• /
• 2001

Steady state thermal analysis has been done by a finite element method in a diode of 12kV blocking voltage. The diode was fabricated by soldering ten pieces of 1200V diodes in series, capping a dummy wafer at the far end of diode series, and finally wire bonded for building anode and cathode terminal. In order to achieve high voltage and reliability, the edge of each diode was beveled and passivated by resin with a thickness of 25${\mu}$m. It was assumed that the generated heat which is mainly by the on-state voltage drop, 9V for 12kV diode, is dissipated by way of the conduction through diodes layers to bonding wire and of the convection at the surface of passivating resin. It was predicted by the thermal analysis that the temperature rise of a pn junction of the 12kV diode can reach at the range of 16∼34$^{\circ}C$ under the given boundary conditions. The thickness and thermal conductivity(0.3∼3W/m-K) of the passivating resin did little effect to lower thermal resistance of the diode. As the length of the bonding wire increased, which means the distance of heat conduction path became longer, the thermal resistance increased considerably. The thermal analysis results imply that the generated heat of the diode is dissipated mainly by the conduction through the route of diode-dummy wafer-bonding wire, which suggests to minimize the length of the wire for the lowest thermal resistance.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.285-285
• /
• 2011

EUVL (Extreme Ultra Violet Lithography) is one of competitive lithographic technologies for sub-30nm fabrication of nano-scale Si devices that can possibly replace the conventional photolithography used to make today's microcircuits. Among the core EUVL technologies, mask fabrication is of considerable importance since the use of new reflective optics having a completely different configuration compared to those of conventional photolithography. Therefore new materials and new mask fabrication process are required for high performance EUVL mask fabrication. This study investigated the etching properties of SnO2 (Tin Oxide) as a new absorber material for EUVL binary mask. The EUVL mask structure used for etching is SnO2 (absorber layer) / Ru (capping / etch stop layer) / Mo-Si multilayer (reflective layer) / Si (substrate). Since the Ru etch stop layer should not be etched, infinitely high selectivity of SnO2 layer to Ru ESL is required. To obtain infinitely high etch selectivity and very low LER (line edge roughness) values, etch parameters of gas flow ratio, top electrode power, dc self - bias voltage (Vdc), and etch time were varied in inductively coupled Cl2/Ar plasmas. For certain process window, infinitely high etch selectivity of SnO2 to Ru ESL could be obtained by optimizing the process parameters. Etch characteristics were measured by on scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) analyses. Detailed mechanisms for ultra-high etch selectivity will be discussed.

• 대한소아치과학회지
• /
• 제49권4호
• /
• pp.379-391
• /
• 2022

이 연구는 premixed MTA 제재와 기존 치수복조제의 경화 전, 후의 pH 값 그리고 칼슘, 황, 스트론튬 이온의 유리량, 용해도를 비교했다. 사용된 재료는 다음과 같다 : 레진 강화형 칼슘실리케이트(TheraCal LC^®; TLC), 레진 강화형 수산화칼슘(UBP, Ultra-Blend^TM plus), 2종류의 premixed MTA(Endocem MTA^® premixed regular [EMPR] and Well-Root^TM PT [WRP]). 각 재료의 시편은 경화 전, 경화 후 2군으로 나누어 준비한 뒤 증류수에 보관하였다. pH, 용해도를 측정하였으며 ICP-AES를 이용한 칼슘, 황, 스트론튬의 3가지 이온 유리량을 측정하였다. 경화 후 군에서 TLC와 UBP의 pH 값은 감소했다. 그러나 premixed MTA 재료의 pH 값은 증가했다. TLC는 다른 재료와 비교하여 스트론튬 이온 유리량이 더 많았다. 동시에 EMPR에서 황이온 유리량이 높았다(p < 0.05). 경화 후 군에서 칼슘 이온 방출은 두 종류의 premixed MTA에서 더 높았다(p < 0.05). 경화 후 군에서 용해도는 Kruskal-Wallis 서 test를 이용하여 통계분석하였고 Mann-Whitney U test를 이용하여 사후검정하였다. 결론적으로 레진 강화형 칼슘 실리케이트 시멘트, 레진 강화형 수산화칼슘 시멘트, 2종류의 premixed MTAs 모두 경화 후 알칼리성 pH 값과 낮은 용해도를 가지고 있었으며 다양한 이온을 유리했다.