• 한국농공학회논문집
• /
• 제58권2호
• /
• pp.1-9
• /
• 2016

This study aims to assess the effectiveness of activated carbon (AC) and crushed concrete (CC) as capping material to block the release of nitrogen, phosphorus, and organic substance from reservoir sediments. The efficiency of AC and CC as capping material was evaluated in a reactor in which a 1 or 3 cm thick layer of capping materials was placed on the sediments collected from Mansu reservoir in Anseong-city. Dissolved oxygen (DO) concentration, total nitrogen (T-N), total phosphorus (T-P), and chemical oxygen demand (COD) concentration in reservoir water above the uncapped sediments and capping material were monitored for 45 days. The release rate of T-N was in the following increasing order: AC 3 cm ($1.18mg/m^2{\cdot}d$) < CC 1 cm ($2.66mg/m^2{\cdot}d$) < AC 1 cm ($2.94mg/m^2{\cdot}d$) < CC 3 cm ($3.42mg/m^2{\cdot}d$) < uncapped ($4.59mg/m^2{\cdot}d$). The release rate of T-P was in the following increasing order: AC 3 cm ($0mg/m^2{\cdot}d$) $${\approx_-}$$ CC 3 cm ($0mg/m^2{\cdot}d$) < CC 1 cm ($0.03mg/m^2{\cdot}d$) < AC 1 cm capped ($0.07mg/m^2{\cdot}d$) < uncapped ($0.24mg/m^2{\cdot}d$). The release of nitrogen and phosphorus were effectively blocked by AC capping of 3 cm thickness, and CC capping of 3 cm thickness effectively controlled the release of phosphorus. The order of increasing COD release rate was as follows: AC 3 cm ($0mg/m^2{\cdot}d$) $${\approx_-}$$ CC 3 cm ($0mg/m^2{\cdot}d$) < CC 1 cm ($5.03mg/m^2{\cdot}d$) < AC 1 cm ($7.28mg/m^2{\cdot}d$) < uncapped ($10.05mg/m^2{\cdot}d$), indicating that AC and CC capping effectively interrupted the release of organic contaminants from the sediments. It was concluded that AC and CC could effectively block the release of T-N, T-P and COD release from contaminated reservoir sediments.

• 한국재료학회지
• /
• 제17권9호
• /
• pp.463-468
• /
• 2007

The interdiffusion characteristics of Cu-plug/Capping Layer/NiSi contacts were investigated. Capping layers were deposited on Ni/Si to form thermally-stable NiSi and then were utilized as diffusion barriers between Cu/NiSi contacts. Four different capping layers such as Ti, Ta, TiN, and TaN with varying thickness from 20 to 100 nm were employed. When Cu/NiSi contacts without barrier layers were furnace-annealed at $400^{\circ}C$ for 40 min., Cu diffused to the NiSi layer and formed $Cu_3Si$, and thus the NiSi layer was dissociated. But for Cu/Capping Layers/NiSi, the Cu diffusion was completely suppressed for all cases. But Ni was found to diffuse into the Cu layer to form the Cu-Ni(30at.%) solid solution, regardless of material and thickness of capping layers. The source of Ni was attributed to the unreacted Ni after the silicidation heat-treatment, and the excess Ni generated by the transformation of $Ni_2Si$ to NiSi during long furnace-annealing.

• 한국전기전자재료학회논문지
• /
• 제15권11호
• /
• pp.976-980
• /
• 2002

This paper repors on low temperature sealing process of PDP using binder and capping glass. The exhausting hole on rear glass of PDP was sealed by capping glass using screen-printed binder without exhausting glass tube. Based on the tubeless packaging process, out gassing problem could be reduced and vacuum conductance could be improved by eliminating exhaust tube.

• Bulletin of the Korean Chemical Society
• /
• 제35권8호
• /
• pp.2281-2284
• /
• 2014

Polystyrene beads (PS beads) with narrow size distribution were synthesized, and their diameter was controlled from 1.2 to $5{\mu}m$ by varying the injection rate of a styrene solution containing initiator and the concentration of reactant, such as initiator and capping material. The diameter of the PS beads increased with increasing in the injection rates and the initiator concentration or decreasing the capping material concentration. Then, we used the PS beads as building block, and organized them into a hexagonally close-packed monolayer on substrate with template-assisted manual assembly. We showed perfect hexagonally close-packed organization of the PS beads with various sizes in large-scale area. And we demonstrated the superiority of the dry manual assembly over the wet self-assembly in terms of simplicity, speed, perfect ordering, and large scale.

• 한국산학기술학회논문지
• /
• 제14권3호
• /
• pp.1512-1518
• /
• 2013

말단캡핑제(end capping agent) 6종류에 대해 폴리카보네이트를 용융중합법으로 제조하였다. 합성된 폴리카보네이트의 화학구조는 FT-IR 스펙트럼을 이용하여 확인하였다. 평균분자량 및 분자량분포도, 유리전이 온도 및 열분해 온도는 GPC, DSC와 TGA를 이용하여 측정하였다. 말단캡핑제의 화학구조에 따라 평균분자량이 증가 또는 감소를 나타내었으며, 말단캡핑제로 4-tert-butylphenol (TBP)이 사용되었을 때 최적의 분자량 조절 결과를 나타내었다. 말단캡핑제의 함량이 증가할수록 평균분자량은 감소하였고, 4-tert-butylphenol이 0.05 - 0.1 mol%가 첨가될 때 폴리카보네이트의 대형 사출물 가공에 적합한 20,000 - 30,000 정도의 수평균분자량을 나타내었다. 폴리카보네이트의 용융점도와 유리전이온도는 분자량이 감소할수록 감소하였다. 말단캡핑제의 투입방법 변경은 PC의 분자량분포도에 영향을 주었고, power law index의 감소를 보여주었다.

• Journal of Yeungnam Medical Science
• /
• 제37권3호
• /
• pp.217-225
• /
• 2020

Background: This study was performed to provide a long-term bacterial seal through the formation of reparative dentin bridge, calcium silicate-based pulp capping materials have been used at sites of pulpal exposure. The aim of this study was to evaluate the mineralization-inducing potentials of calcium silicate-based pulp capping materials (ProRoot MTA [PR], Biodentine [BD], and TheraCal LC [TC]) in human dental pulp cells (HDPCs). Methods: Specimens of test materials were placed in deionized water for various incubation times to measure the pH variation and the concentration of calcium released. The morphology of HDPCs cultured on the specimens was examined using a confocal laser scanning microscope (CLSM). Alizarin red S staining and alkaline phosphatase assays were used to evaluate mineralization-inducing potentials of the capping materials. Results: BD showed the highest calcium release in all test periods, followed by PR and TC. (p<0.05). All experimental groups showed high alkalinity after 1 day, except at 14 days. BD showed the highest cell viability compared with PR and TC after 1 and 3 days, while TC showed the lowest value (p<0.05). The CLSM analysis showed that cells were well adhered and expressed actin filaments for all pulp capping materials. Mineralization by PR and BD groups was higher than that by TC group based on alizarin red S staining. BD showed significantly higher alkaline phosphatase activity than PR and TC, while TC showed the lowest value (p<0.05). Conclusion: Within the limitations of the in vitro study, BD had higher mineralization-inducing potential than PR and TC.

• 반도체디스플레이기술학회지
• /
• 제21권3호
• /
• pp.119-124
• /
• 2022

Top emission organic light-emitting diode (TEOLED) is commonly used because of high efficiency and good color purity than bottom - emission organic light-emitting device (BEOLED). Unlike BEOLED, TEOLED contain semitransparent metal cathode and capping layer. Because there are many characteristics to consider just simple thickness change, optimizing organic thickness of TEOLED for microcavity is difficult. So, in this study, we optimized Device capping layer at unoptimized micro-cavity structure TEOLED device. And we compare only capping layer with unoptimized microcavity structure can overcome optimized micro-cavity structure device. We used previous our optimized micro-cavity structure to compare each other. As a result, it has been found that the efficiency can be obtained almost the same or higher only capping layer, which is stacked on top of the device and controls only the thickness and refractive index, without complicated structural calculations. This means that higher efficiencies can be obtained more easily in laboratories with limited organic materials or when optimizing new structures etc.

• 한국지반환경공학회 논문집
• /
• 제15권7호
• /
• pp.51-58
• /
• 2014

피복공법은 해저 퇴적오염물질을 차단하고 안정화시켜 처리하는 방안이다. 국내에서는 피복공법에 대한 연구가 부족하나, 오염물질이 방출되지 않기 위한 공학적 접근법이 반드시 필요하다. 본 연구에서는 피복설계 시 중요 인자인 피복재 침식을 확인하기 위해 조파장치를 이용한 수리모형실험을 실시하였다. 1:10의 실험축척을 적용하여 0.07~2 mm 크기의 모래를 피복 재료로 사용하였고, 모형 수조 내 강사한 후 파랑을 발생시켜 피복재의 형상변화를 관측하였다. 실험결과, 피복재의 표면은 파랑의 파형과 유사하게 변형이 발생하였으며, 파랑의 파고가 증가할수록 대체적으로 침식되는 피복재의 깊이가 증가하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.1060-1067
• /
• 2006

Sandy soils are generally used as a capping material to reduce the pollutants transport from the contaminated dredged sediment. However, dredged material capping is not widely used because regulatory agencies are concerned about the potential for contaminants migration through the cap. Movement of contaminated pore water from sediment into cap is mainly related to sediment consolidation during and after cap placement. To evaluate the significance of consolidation induced transport of contaminants from sediment into cap, research centrifuge tests were conducted. Centrifuge test results illustrate that advection and dispersion are the dominant contaminants transport processes and that capping reduces the potential of contaminant migration from the dredged sediment effectively.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2002년도 동계연구발표회 논문개요집
• /
• pp.50-51
• /
• 2002

최근 실온에서 약 40％ 이상의 높은 자기저항(magnetoresistance, MR)을 나타내는 자기 터널 접합(magnetic tunnel junction, MTJ)이 보고되면서 비휘발성 자기메모리로의 응용을 눈앞에 두고 있다.[1]. 이에 본 실험에서는 Substrate / Ta (base electrode) / NiFe / PtMn (AF pinning layer) / CoFe (pinned) / Ru / CoFe (fixed) / Al-O/ CoFe (free) / NiFe (free) / Ta & Ru (Capping Layer)과 같은 MTJ 증착 구조를 사용하여, MTJ의 보다 향상된 특성을 확보하기 위한 노력으로서 Al-O 두께, 어닐링 조건(Field Intensity ＆ Sequence)변화 등을 시도하였다. (중략)