• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.7
• /
• pp.732-738
• /
• 2005

The purpose of this study is the presentation of the proper microwave treatment conditions by means of the investigation of the effect of microwave irradiation on the dewaterability and dryability of sludge. For the improving of dewatering efficiency of sludge using the microwave, the proper time of microwave irradiation is very important. The dewatering efficiency of thickening sludge conditioned by microwave irradiation for proper time was considerably improved with reducing of capillary suction time from 52.3 sec to 30.8 sec, and the sludge conditioned by microwave irradiation had contained the moisture of 81.4% after that pressure filtrationed. The result of drying characteristics of dewatered sludge using the microwave irradiation and furnace heating, for drying of sludge to moisture of below 55%, microwave irradiation time was required 3 min, whereas, furnace heating was required 40 min at $105^{\circ}C$, 20 min at $170^{\circ}C$ and 9 min at $300^{\circ}C$, respectively. We certified that the drying of dewatered sludge using the microwave irradiation was effectively reduction of moisture of sludge compare to traditional heating method.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.1
• /
• pp.54-60
• /
• 2010

Purpose: Nuclear medicine manufacturers provide various softwares which shorten imaging time using their own image processing techniques such as UlatraSPECT, ASTONISH, Flash3D, Evolution, and nSPEED. Seoul National University Hospital has introduced softwares from Siemens and Philips, but it was still hard to understand algorithm difference between those two softwares. Thus, the purpose of this study was to figure out the difference of two softwares in planar images and research the possibility of application to images produced with high energy isotopes. Materials and Methods: First, a phantom study was performed to understand the difference of softwares in static studies. Various amounts of count were acquired and the images were analyzed quantitatively after application of PIXON, Siemens and ASTONISH, Philips, respectively. Then, we applied them to some applicable static studies and searched for merits and demerits. And also, they have been applied to images produced with high energy isotopes. Finally, A blind test was conducted by nuclear medicine doctors except phantom images. Results: There was nearly no difference between pre and post processing image with PIXON for FWHM test using capillary source whereas ASTONISH was improved. But, both of standard deviation(SD) and variance were decreased for PIXON while ASTONISH was highly increased. And in background variability comparison test using IEC phantom, PIXON has been decreased over all while ASTONISH has shown to be somewhat increased. Contrast ratio in each spheres has also been increased for both methods. For image scale, window width has been increased for 4~5 times after processing with PIXON while ASTONISH showed nearly no difference. After phantom test analysis, ASTONISH seemed to be applicable for some studies which needs quantitative analysis or high contrast, and PIXON seemed to be applicable for insufficient counts studies or long time studies. Conclusion: Quantitative values used for usual analysis were generally improved after application of the two softwares, however it seems that it's hard to maintain the consistency for all of nuclear medicine studies because result images can not be the same due to the difference of algorithm characteristic rather than the difference of gamma cameras. And also, it's hard to expect high image quality with the time shortening method such as whole body scan. But it will be possible to apply to static studies considering the algorithm characteristic or we can expect a change of image quality through application to high energy isotope images.

• Journal of Chest Surgery
• /
• v.40 no.8
• /
• pp.552-557
• /
• 2007

Background: B-type natriuretic peptide (BNP) is a cardiac hormone that is primarily synthesized by the ventricular cardiac myocytes. Increased plasma BNP levels have been observed in patients suffering with congestive heart failure, ventricular hypertrophy and myocaridits and also during heart transplantation rejection. We investigated the serum BNP level as a predictive marker for rejection after heart transplantation. Material and Method: To test the usefulness of measuring the BNP level in cardiac transplant patients, consecutive blood samplings for BNP, right ventricular endomyocardial biopsies, hemodynamic measurements and transthoracic echocardiogram were all done in 10 such patients between January 2004 and August 2005 at the Department of Thoracic and Cardiovascular Surgery in Asan Medical Center. Two groups were identified with using the median value: the low BNP group (n=28, BNP: ${\le}290$ pg/mL) and the high BNP group (n=29, BNP: >290 pg/mL). We retrospectively analyzed rejection, the ejection fraction, tricuspid regurgitation, left ventricular hypertrophy, the pulmonary capillary wedge pressure and the right atrial pressure between the 2 groups. Result: There were no differences in age, gender, rejection, the ejection fraction, tricuspid regurgitation, left ventricular hypertrophy and the right atrial pressure between the 2 groups (p>0.05). However, a higher pulmonary capillary wedge pressure and a higher mean pulmonary atrial pressure were observed in the high BNP group (p<0.05). Further, BNP has linear correlation with the pulmonary capillary wedge pressure (r=0.590, p<0.001). Using the cut-off value of 620 pg/mL, the BNP predicted a high PCWP (>12 mmHg) with a sensitivity of 83.3% and a specificity of 91.1% (AUC: $0.900{\pm}0.045$, p<0.001). Conclusion: The BNP level after heart transplantation does not show any significant correlation with rejection, yet it might be a predictive marker of ventricular diastolic dysfunction.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.769-772
• /
• 2005

Five DOF motion errors of a hydrostatic bearing table driven by the coreless type linear motor were compensated utilizing the active controlled capillaries in this study. Horizontal linear motion and yaw error were simultaneously compensated using two active controlled capillaries and vertical linear motion, pitch and yaw error were also simultaneously compensated using three active controlled capillaries. By the compensation, horizontal linear motion accuracy and yaw were improved from 0.16 ${\mu}m$ and 1.96 arcsec to 0.02 ${\mu}m$ and 0.03 arcsec. Vertical linear motion accuracy, pitch and roll were also largely improved from 0.18 ${\mu}m$, 2.26 arcsec and 0.14 arcsec upto 0.03 ${\mu}m$, 0.07 arcsec and 0.02 arcsec. The compensated motion errors were within the range of measuring repeatability which was ${\pm}0.02\;{\mu}m$ in the linear motion and ${\pm}0.05$ arcsec in the angular motion. From these results, it is found that the motion error compensation method utilizing the active controlled capillaries are very effective to improve the five motion accuracies of the hydrostatic bearing tables.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.5
• /
• pp.565-571
• /
• 2010

One of the disadvantages of flooding treatment for desalting from soils is that salts move to deep soils after flooding and at the end reaccumulate at the soil surface through capillary movements. This study was carried out to remove salts from soils in plastic film houses by a modified flooding method, drainage after flooding. The method successfully removed salts at the soil surface and salts did not move to the deep soil. Drained water containing N, P and K could be reused as fertilizer. By applying small amount of MgO, turbidity of water flooded decreased in 30 min by 95%. Struvite should be formed since the flooded water contain ammonia and phosphorous and their concentrations were decreased. This could be utilized as fertilizer which provides a slow-release source of phosphorus, magnesium and nitrogen that features low inherent water solubility.

• Journal of Pharmacopuncture
• /
• v.11 no.2
• /
• pp.5-12
• /
• 2008

Objective In this article, we report on the intradermal Alcian blue staining method for tracing the meridians of acupuncture. Methods 1% Alcian blue solution was injected into acupoints by using a 0.5mL insulin syringe with a 31-gauge needle, then the skin was incised and was observed under a stereoscopic microscope. The specimens were examined by using immunohistochemical methods and were observed under a confocal laser scanning microscope. Results A threadlike structure, which was visualized with Alcian blue, existed in dermis layer and proceeded to hypodermis. In this structure, characteristic alignments of rod- shaped nuclei and $1-2{\mu}m$ sized DNA granules were observed. Furthermore, abundant blood capillary plexuses, peripheral nerve endings, and a corpuscle-like structure(about $300{\mu}m$ in diameter) were visualized in the skin tissues of acupoints. Conclusion It was concluded that the specific threadlike and corpuscle-like structures corresponded to superficial Bonghan duct and corpuscle, respectively.

• Microbiology and Biotechnology Letters
• /
• v.27 no.6
• /
• pp.491-499
• /
• 1999

A great variety of the volatile metabolic by-products was formed in yeast cell during alcohol fermentation. The seibel grape (Vitis labrasca) which was grown in the Southern Korea used for wines. The objective of this research was to identify the volatile flavor compounds during alcohol fermentation and aging at 12$^{\circ}C$. saccharomyces cerevisiae and Schizosaccharomyces pombe were inoculated and fermented in seibel grape must. The volatile flavor compounds of logarithmic, stationary and death phases were extracted, concentrated and identified by gas chromatography/mass spectrometer (GC/MS). The volatile flavor compounds were determined by a Hewlett-Packard 5890 II Plus GC which was equipped with Supelcowax 10 fused silica capillary column (60m$\times$0.32mm$\times$0.25${\mu}{\textrm}{m}$ film thickness) wall coated with polyethyleneglycerol. The scan detection method allowed the comparison of the spectrum from the chromatogram of volatile flavor compounds to those in data Wileynbs base library. Among the volatile compounds collected by ether-hexane extraction method, the evolution of 20 main compounds, such as 9 esters (ethyl butyrate, isoamyl acetate, ethyl caproate, n-hexyl acetate, ethl caprylate, ethyl caprate, diethy succinate, ethyl hexadecanoate, 2-pheneethyl acetate), 4 alcohols (3-methyl-1-butanol, 1-hexanol, 1-heptanol, benzoethanol), 4 ketones and acids (2-octanone, caproic acid, caprylic acid, capric acid), 2 furan and phenol (2,6-bis(1,1-dimethyl ethyl)phenol, 2,3-dihydrobenzofuran) were observed during alcohol fermentation and aging. The production of the esters during alcohol fermentation with S. cerevisiae was higher than those of Sch. pombe. The sensory scores of the aged wine samples in aroma, taste and overall acceptability were not significantly different(p<0.05).

• The Korean Journal of Mycology
• /
• v.19 no.4
• /
• pp.292-298
• /
• 1991

Volatile aroma concentrates of Pleurotus sajor-caju which stored at $20^{\circ}C$ incubator and cold room were obtained by simultaneous distillation-extraction method. The volatile components were identified by combined capillary gas chromatography-mass spectrometry and comparison of retention data on GC of those authentic compounds. Storage at room temperature resulted in significant decreased in their total aroma contents, whereas little changes at cold storage foured, even though appreciable changes were observed in GC pattern between the control and stored samples. Of 38 components identified, ${\delta}-decalactone$ increased while rest of the volatiles decreased rapidly during storage at room temperature, but at cold storage 2-methyl butanal, 1-octen-3-ol, cis,cis-1,5-octadien-3-ol and pentadecanoic acid decreased while 3-octanone, 1-octen-3-one, 3-octanol and 5-undecanol increased with the storage time. The weight losses and organoleptic properties changed extremely by the storage under room temperature, on the other hand, slight changes were found in cold storage.

• The Korean Journal of Mycology
• /
• v.19 no.4
• /
• pp.299-305
• /
• 1991

Volatile aroma concentrates of four oyster mushrooms cultivated in Korea were obtained by the simultaneous distillation-extraction method. The volatile components were identified by the combined capillary gas chromatography-mass spectrometry and compared with the of retention data on GC of those authentic compounds. About 54 volatile compounds were identified in each of the four edible oyster mushrooms. The main compounds in Pleurotus ostreatus ASI 201 were 1-octen-3-ol, 3-octanone, 3-octanol, in Pleurotus sajor-caju, 1-octen-3-ol, 3-octanone, 1,5-octadien-3-one, 3-octanol, in Pleurotus florida-ostreatus-ostreatus, 1-octen-3-ol, n-hexanol, 3-octanone, 3-octanol, phenol, and in Pleurotus ostreatus (Ae-Neutari), 1-octen-3-ol, n-pentanal, n-hexanol, n-pentanol, 3-octanone, 3-octanol, 1,5-octadien-3-one, respectively. The mushrooms worked were rich in an alcohols and carbonyl compounds containing $C_8$ compounds. The peak area ratio of $C_8$ compounds in aroma concentrates were 56.60% in Pleurotus ostreatus ASI 201, 72.46% in Pleurotus sajor-caju, 54.84% in Pleurotus florida-ostreatus-ostreatus and 35.85% in Pleurotus ostreatus (Ae-Neutari ), respectively.

• Journal of Biosystems Engineering
• /
• v.36 no.1
• /
• pp.23-32
• /
• 2011

In this work, the finite element method was used to investigate the shifts of resonance frequencies and quality factor of whispering-gallery-mode (WGM) for an opto-fluidic ring resonator (OFRR) biosensor. To describe the near-field radiation transfer, the time-domain Maxwell's equations were employed and solved by using the in-plane TE wave application mode of the COMSOL Multiphysics with RF module. The OFRR biosensor model under current study includes a glass capillary with a diameter of 100 mm and wall thickness of 3.0 mm. The resonance energy spectrum curves in the wavelength range from 1545 nm to 1560 nm were examined under different biosensing conditions. We mainly studied the sensitivity of resonance shifts affected by changes in the effective thickness of the sensor resonator ring with a 3.0 mm thick wall, as well as changes in the refractive index (RI) of the medium inside ring resonators with both 2.5 mm and 3.0 mm thick walls. In the bulk RI detection, a sensitivity of 23.1 nm/refractive index units (RIU) is achieved for a 2.5 mm thick ring. In small molecule detection, a sensitivity of 26.4 pm/nm is achieved with a maximum Q-factor of $6.3{\times}10^3$. These results compare favorably with those obtained by other researchers.